On 1/26/06, TJ <[EMAIL PROTECTED]> wrote:
> Hi,
>
> I have a Dell R300 of some sort. Its PCI ID was not in
> drm_pciids.h
>
> so I added: (didn't know so added both heads listing)
>
> {0x1002, 0x5b60, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R300}, \
> {0x1002, 0x5b70, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R300}, \
>you don't need the secondary id. also the drm isn't necessary for dualhead and won't actually be used in what you are trying to do. > Cards lspci -vvn output: > > 0000:01:00.0 0300: 1002:5b60 > Subsystem: 1002:0402 > Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Interrupt: pin A routed to IRQ 16 > Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M] > Region 1: I/O ports at dc00 [size=256] > Region 2: Memory at dfde0000 (32-bit, non-prefetchable) [size=64K] > Expansion ROM at dfe00000 [disabled] [size=128K] > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [58] #10 [0001] > Capabilities: [80] Message Signalled Interrupts: 64bit+ > Queue=0/0 Enable- > Address: 0000000000000000 Data: 0000 > > 0000:01:00.1 0380: 1002:5b70 > Subsystem: 1002:0403 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0, Cache Line Size: 0x10 (64 bytes) > Region 0: Memory at dfdf0000 (32-bit, non-prefetchable) [size=64K] > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [58] #10 [0001] > > and lspci -v output (for some strings) > > 0000:01:00.0 VGA compatible controller: ATI Technologies Inc RV370 > 5B60 [Radeon X300 (PCIE)] (prog-if 00 [VGA]) > Subsystem: ATI Technologies Inc: Unknown device 0402 > Flags: fast devsel, IRQ 16 > Memory at d0000000 (32-bit, prefetchable) [size=128M] > I/O ports at dc00 [size=256] > Memory at dfde0000 (32-bit, non-prefetchable) [size=64K] > Expansion ROM at dfe00000 [disabled] [size=128K] > Capabilities: [50] Power Management version 2 > Capabilities: [58] #10 [0001] > Capabilities: [80] Message Signalled Interrupts: 64bit+ > Queue=0/0 Enable- > > 0000:01:00.1 Display controller: ATI Technologies Inc RV370 [Radeon X300SE] > Subsystem: ATI Technologies Inc: Unknown device 0403 > Flags: bus master, fast devsel, latency 0 > Memory at dfdf0000 (32-bit, non-prefetchable) [size=64K] > Capabilities: [50] Power Management version 2 > Capabilities: [58] #10 [0001] > you can ignore the 0000:01:00.1 id. > I am trying to get dual head to work properly. Maybe someone can help. > I don't want clone or mergefb i want two independant screens. > But I only get those two modes. > Here is my current configs incarnation: this is more of an x server issues than DRI related. In fact the DRI won't even work with two independant screens on a dualhead card. > > Section "Device" > Identifier "ATI R300 1" > Driver "radeon" > # Option "MonitorLayout" "TMDS, TMDS" > Option "DDCMode" "TRUE" > BusID "PCI:1:0:0" > Screen 0 > EndSection > > Section "Device" > Identifier "ATI R300 2" > Driver "radeon" > Option "DDCMode" "TRUE" > BusID "PCI:1:0:0" > Screen 1 > EndSection > > usual screen and monitor sections, and screen 2 set RightOf screen 1 > in layout section. This gives me a clone screen on 2 that the mouse > can not get on. > > If anyone is interested in helping I can give logs, full config etc. > can you post your full log and config somewhere? Alex > Thank you > > Thorben > > PS I am not on the list, please CC me > > ------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://sel.as-us.falkag.net/sel?cmd=lnk&kid3432&bid#0486&dat1642 -- _______________________________________________ Dri-devel mailing list Dri-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/dri-devel
