1) always test your serial setup with "tip" on both sides before trying to get the console to work.
2) if the target system has no serial ports enabled, no drivers will attach to them. Check the BIOS setup on the target system (since I assume you have plugged the cable in, so there must be serial port hardware there). Venu Chennupati wrote: > I am trying to set-up serial console for my system. I have redirected > console > using "-B console=ttya" in grub menu. > and connected to remote system with a serial cable(also using null modem), > tip -9600 /dev/ttya doesnot seem to work. > > remote system has links setup for ttya > bash-3.2$ ls -l /dev/ttya > lrwxrwxrwx 1 root root 26 Sep 22 14:39 /dev/ttya -> > ../devices/isa/[EMAIL PROTECTED],3f8:a > bash-3.2$ > > target system donot have setup > > # ls -l /dev/ttya > /dev/ttya: No such file or directory > # ls -l /dev/ttyb > /dev/ttyb: No such file or directory > # > > # ls -l /dev/term/* > /dev/term/*: No such file or directory > # > > I am not sure, what is the driver for this. Could you suggest what is > the supported > driver for this platform, I have snv_100 installed on this platform. > and the following is the platform info: > _______________________________________________ driver-discuss mailing list [email protected] http://mail.opensolaris.org/mailman/listinfo/driver-discuss
