pci bus 0x0003 cardnum 0x06 function 0x00: vendor 0x9710 device 0x9835
NetMos Technology PCI 9835 Multi-I/O Controller
This specific controller has serial ports. Tried with device detection
tool on OpenSolaris 2008.05, it confirmed no Solaris Driver.
This seems to bind by symhisl driver, which allways fail to attach
pci1000,12 (driver name: symhisl)
Hardware properties:
name='assigned-addresses' type=int items=30
value=81033010.00000000.0000de00.00000000.00000008.8
... ... ... ...
... ... ... ...
name='compatible' type=string items=7
value='pci9710,9835.1000.12.1' +
'pci9710,9835.1000.
12' + 'pci1000,12' + 'pci9710,9835.1' + 'pci9710,9835' +
'pciclass,078000' + 'pc
iclass,0780'
name='model' type=string items=1
value='Communication device'
name='power-consumption' type=int items=2
value=00000001.00000001
name='fast-back-to-back' type=boolean
name='devsel-speed' type=int items=1
value=00000001
name='interrupts' type=int items=1
value=00000001
name='max-latency' type=int items=1
value=00000000
name='min-grant' type=int items=1
value=00000000
name='subsystem-vendor-id' type=int items=1
value=00001000
name='subsystem-id' type=int items=1
value=00000012
name='unit-address' type=string items=1
value='6'
name='class-code' type=int items=1
value=00078000
name='revision-id' type=int items=1
value=00000001
name='vendor-id' type=int items=1
value=00009710
name='device-id' type=int items=1
value=00009835
Thanks,
Venu.
Venu C wrote:
> Dan Mick wrote:
>
>> 1) always test your serial setup with "tip" on both sides before
>> trying to get the console to work.
>>
> Sure.
>
>> 2) if the target system has no serial ports enabled, no drivers will
>> attach to them. Check the BIOS setup on the target system (since I
>> assume you have plugged the cable in, so there must be serial port
>> hardware there).
>>
> Yes, serial port hardware is there. From BIOS, I couldnot find an
> option how to
> enable/set serial port. Then tried with Ubuntu linux, and it has
> found the hardware,
> and able to tip from solaris node. With Solaris /dev/ttya or
> /dev/ttyb are not created.
>
> I see some devinfo nodes missing drivers, not sure that is the cause.
>
> Thanks,
> Venu.
>
> Thanks,
> Venu.
>
>
>> Venu Chennupati wrote:
>>
>>> I am trying to set-up serial console for my system. I have redirected
>>> console
>>> using "-B console=ttya" in grub menu.
>>> and connected to remote system with a serial cable(also using null
>>> modem),
>>> tip -9600 /dev/ttya doesnot seem to work.
>>>
>>> remote system has links setup for ttya
>>> bash-3.2$ ls -l /dev/ttya
>>> lrwxrwxrwx 1 root root 26 Sep 22 14:39 /dev/ttya ->
>>> ../devices/isa/[EMAIL PROTECTED],3f8:a
>>> bash-3.2$
>>>
>>> target system donot have setup
>>>
>>> # ls -l /dev/ttya
>>> /dev/ttya: No such file or directory
>>> # ls -l /dev/ttyb
>>> /dev/ttyb: No such file or directory
>>> #
>>>
>>> # ls -l /dev/term/*
>>> /dev/term/*: No such file or directory
>>> #
>>>
>>> I am not sure, what is the driver for this. Could you suggest what is
>>> the supported
>>> driver for this platform, I have snv_100 installed on this platform.
>>> and the following is the platform info:
>>>
>>>
>>
>
> _______________________________________________
> driver-discuss mailing list
> [email protected]
> http://mail.opensolaris.org/mailman/listinfo/driver-discuss
>
>
_______________________________________________
driver-discuss mailing list
[email protected]
http://mail.opensolaris.org/mailman/listinfo/driver-discuss
