----- Original Message ----- >Date: Mon, 6 Jul 2009 19:00:05 -0300 >Subject: Re: [driver-discuss] ASUS P5GC-MX/1333 & Attansic L2 >From: Hernan Saltiel <[email protected]> >To: Masa Murayama <[email protected]> >Cc: [email protected] > > >Here we go:
Thank you very much for sending the logs. >ifconfig -a: > > >lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 >index 1 > >inet 127.0.0.1 netmask ff000000 > >atge0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2 > >inet 10.100.100.2 netmask ffffff00 broadcast 10.100.100.255 > >ether 0:1f:c6:8:f5:7f > >lo0: flags=2002000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv6,VIRTUAL> mtu 8252 >index 1 > >inet6 ::1/128 There is no problem. 0:1f:c6:8:f5:7f is in the cprrect physical address format, and 0:1f:c6 is a OUI code for Asus. >dmesg | grep atge: > >Jul 6 18:50:04 osol01 atge: [ID 130221 kern.info] atge0: Attansic L2 >(vid: 0x1969, did: 0x2048, revid: 0xa0) >Jul 6 18:50:04 osol01 atge: [ID 451511 kern.info] atge0: MII PHY >(0x004dd022) found at 0 >Jul 6 18:50:04 osol01 atge: [ID 679413 kern.info] atge0: PHY >control:1000<ANE>, >status:7849<100_BASEX_FD,100_BASEX,10_BASE_FD,10_BASE,MFPRMBLSUPR,CANAUTONEG, EXTENDED>, >advert:de1<ASM_DIR,PAUSE,100BASE_TX_FD,100BASE_TX,10BASE_T_FD,10BASE_T>, >lpar:0, exp:2<PAGERCVD> >Jul 6 18:50:04 osol01 gld: [ID 944156 kern.info] atge0: atheros L1 >nic driver v2.6.4: type "ether" mac address 00:1f:c6:08:f5:7f >Jul 6 18:50:04 osol01 pcie_pci: [ID 586369 kern.info] PCIE-device: >pci1043,8...@0, atge0 >Jul 6 18:50:04 osol01 genunix: [ID 936769 kern.info] atge0 is >/p...@0,0/pci8086,2...@1c,1/pci1043,8...@0 >Jul 6 18:50:04 osol01 atge: [ID 188825 kern.info] atge0: >gem_add_intrs: supported intr_types:3 >Jul 6 18:50:04 osol01 pcplusmp: [ID 805372 kern.info] pcplusmp: >pci1969,2048 (atge) instance 0 irq 0x19 vector 0x60 ioapic 0xff intin >0xff is bound to cpu 0 >Jul 6 18:50:04 osol01 atge: [ID 716252 kern.info] atge0: resetting PHY >Jul 6 18:50:05 osol01 atge: [ID 831844 kern.info] atge0: >auto-negotiation started >Jul 6 18:50:10 osol01 atge: [ID 503627 kern.warning] WARNING: atge0: >auto-negotiation failed: timeout > >grep atge /var/adm/messages: > > >Jul 3 19:52:39 osol01 atge: [ID 130221 kern.info] atge0: Attansic L2 (vid: >0x1969, did: 0x2048, revid: 0xa0) > >Jul 3 19:52:39 osol01 atge: [ID 451511 kern.info] atge0: MII PHY >(0x004dd022) found at 0 > >Jul 3 19:52:39 osol01 atge: [ID 679413 kern.info] atge0: PHY >control:1000<ANE>, >status:7849<100_BASEX_FD,100_BASEX,10_BASE_FD,10_BASE,MFPRMBLSUPR,CANAUTONEG, EXTENDED>, >advert:de1<ASM_DIR,PAUSE,100BASE_TX_FD,100BASE_TX,10BASE_T_FD,10BASE_T>, >lpar:45e1<PAUSE,100BASE_TX_FD,100BASE_TX,10BASE_T_FD,10BASE_T>, >exp:2<PAGERCVD> > >Jul 3 19:52:39 osol01 gld: [ID 944156 kern.info] atge0: atheros L1 nic >driver v2.6.4: type "ether" mac address 00:1f:c6:08:f5:7f > >Jul 3 19:52:39 osol01 pcie_pci: [ID 586369 kern.info] PCIE-device: >pci1043,8...@0, atge0 > >Jul 3 19:52:39 osol01 genunix: [ID 936769 kern.info] atge0 is /p...@0 >,0/pci8086,2...@1c,1/pci1043,8...@0 > >Jul 3 19:52:39 osol01 atge: [ID 188825 kern.info] atge0: gem_add_intrs: >supported intr_types:3 > >Jul 3 19:52:39 osol01 pcplusmp: [ID 805372 kern.info] pcplusmp: pci1969,2048 >(atge) instance 0 irq 0x19 vector 0x60 ioapic 0xff intin 0xff is bound to >cpu 0 > >Jul 3 19:52:39 osol01 atge: [ID 716252 kern.info] atge0: resetting PHY > >Jul 3 19:52:40 osol01 atge: [ID 831844 kern.info] atge0: auto-negotiation >started > >Jul 3 19:52:45 osol01 atge: [ID 503627 kern.warning] WARNING: atge0: >auto-negotiation failed: timeout > >Jul 3 19:57:26 osol01 atge: [ID 130221 kern.info] atge0: Attansic L2 (vid: >0x1969, did: 0x2048, revid: 0xa0) > >Jul 3 19:57:26 osol01 atge: [ID 451511 kern.info] atge0: MII PHY >(0x004dd022) found at 0 > >Jul 3 19:57:26 osol01 atge: [ID 679413 kern.info] atge0: PHY >control:1000<ANE>, >status:7849<100_BASEX_FD,100_BASEX,10_BASE_FD,10_BASE,MFPRMBLSUPR,CANAUTONEG, EXTENDED>, >advert:de1<ASM_DIR,PAUSE,100BASE_TX_FD,100BASE_TX,10BASE_T_FD,10BASE_T>, >lpar:0, exp:0 > >Jul 3 19:57:26 osol01 gld: [ID 944156 kern.info] atge0: atheros L1 nic >driver v2.6.4: type "ether" mac address 00:1f:c6:08:f5:7f > >Jul 3 19:57:26 osol01 pcie_pci: [ID 586369 kern.info] PCIE-device: >pci1043,8...@0, atge0 > >Jul 3 19:57:26 osol01 genunix: [ID 936769 kern.info] atge0 is /p...@0 >,0/pci8086,2...@1c,1/pci1043,8...@0 Autonegotiations failed. The link was down. I reviewed the atge source code and found a bug in the initialization procedure for L2 phy. But I'm not sure that it is the root cause because atge worked for L2 chipset in eeepc. Anyway I'll prepare the bug fix later. To avoid autonegatiation, would you force the link to 10M half duplex mode? To achieve that, make /kernel/drv/atge.conf which has following a line: full-duplex=0 speed=10; Then, reboot the system. -masa >Jul 3 19:57:26 osol01 atge: [ID 188825 kern.info] atge0: gem_add_intrs: >supported intr_types:3 > >Jul 3 19:57:26 osol01 pcplusmp: [ID 805372 kern.info] pcplusmp: pci1969,2048 >(atge) instance 0 irq 0x19 vector 0x60 ioapic 0xff intin 0xff is bound to >cpu 0 > >Jul 3 19:57:26 osol01 atge: [ID 716252 kern.info] atge0: resetting PHY > >Jul 3 19:57:27 osol01 atge: [ID 831844 kern.info] atge0: auto-negotiation >started > >Jul 3 19:57:31 osol01 atge: [ID 503627 kern.warning] WARNING: atge0: >auto-negotiation failed: timeout > >Jul 3 20:22:23 osol01 atge: [ID 130221 kern.info] atge0: Attansic L2 (vid: >0x1969, did: 0x2048, revid: 0xa0) > >Jul 3 20:22:23 osol01 atge: [ID 451511 kern.info] atge0: MII PHY >(0x004dd022) found at 0 > >Jul 3 20:22:23 osol01 atge: [ID 679413 kern.info] atge0: PHY >control:1000<ANE>, >status:7849<100_BASEX_FD,100_BASEX,10_BASE_FD,10_BASE,MFPRMBLSUPR,CANAUTONEG, EXTENDED>, >advert:de1<ASM_DIR,PAUSE,100BASE_TX_FD,100BASE_TX,10BASE_T_FD,10BASE_T>, >lpar:0, exp:0 > >Jul 3 20:22:23 osol01 gld: [ID 944156 kern.info] atge0: atheros L1 nic >driver v2.6.4: type "ether" mac address 00:1f:c6:08:f5:7f > >Jul 3 20:22:23 osol01 pcie_pci: [ID 586369 kern.info] PCIE-device: >pci1043,8...@0, atge0 > >Jul 3 20:22:23 osol01 genunix: [ID 936769 kern.info] atge0 is /p...@0 >,0/pci8086,2...@1c,1/pci1043,8...@0 > >Jul 3 20:22:23 osol01 atge: [ID 188825 kern.info] atge0: gem_add_intrs: >supported intr_types:3 > >Jul 3 20:22:23 osol01 pcplusmp: [ID 805372 kern.info] pcplusmp: pci1969,2048 >(atge) instance 0 irq 0x19 vector 0x60 ioapic 0xff intin 0xff is bound to >cpu 0 > >Jul 3 20:22:23 osol01 atge: [ID 716252 kern.info] atge0: resetting PHY > >Jul 3 20:22:24 osol01 atge: [ID 831844 kern.info] atge0: auto-negotiation >started > >Jul 3 20:22:28 osol01 atge: [ID 503627 kern.warning] WARNING: atge0: >auto-negotiation failed: timeout > >Jul 6 18:50:04 osol01 atge: [ID 130221 kern.info] atge0: Attansic L2 (vid: >0x1969, did: 0x2048, revid: 0xa0) > >Jul 6 18:50:04 osol01 atge: [ID 451511 kern.info] atge0: MII PHY >(0x004dd022) found at 0 > >Jul 6 18:50:04 osol01 atge: [ID 679413 kern.info] atge0: PHY >control:1000<ANE>, >status:7849<100_BASEX_FD,100_BASEX,10_BASE_FD,10_BASE,MFPRMBLSUPR,CANAUTONEG, EXTENDED>, >advert:de1<ASM_DIR,PAUSE,100BASE_TX_FD,100BASE_TX,10BASE_T_FD,10BASE_T>, >lpar:0, exp:2<PAGERCVD> > >Jul 6 18:50:04 osol01 gld: [ID 944156 kern.info] atge0: atheros L1 nic >driver v2.6.4: type "ether" mac address 00:1f:c6:08:f5:7f > >Jul 6 18:50:04 osol01 pcie_pci: [ID 586369 kern.info] PCIE-device: >pci1043,8...@0, atge0 > >Jul 6 18:50:04 osol01 genunix: [ID 936769 kern.info] atge0 is /p...@0 >,0/pci8086,2...@1c,1/pci1043,8...@0 > >Jul 6 18:50:04 osol01 atge: [ID 188825 kern.info] atge0: gem_add_intrs: >supported intr_types:3 > >Jul 6 18:50:04 osol01 pcplusmp: [ID 805372 kern.info] pcplusmp: pci1969,2048 >(atge) instance 0 irq 0x19 vector 0x60 ioapic 0xff intin 0xff is bound to >cpu 0 > >Jul 6 18:50:04 osol01 atge: [ID 716252 kern.info] atge0: resetting PHY > >Jul 6 18:50:05 osol01 atge: [ID 831844 kern.info] atge0: auto-negotiation >started > >Jul 6 18:50:10 osol01 atge: [ID 503627 kern.warning] WARNING: atge0: >auto-negotiation failed: timeout > > > >Thanks a lot, Masa!!! > >Best regards, > > > >HeCSa. > > > > >2009/7/6 Masa Murayama <[email protected]> > >> ----- Original Message ----- >> >From: HeCSa <[email protected]> >> >To: [email protected] >> >Date: Mon, 06 Jul 2009 01:50:17 -0300 >> >Subject: [driver-discuss] ASUS P5GC-MX/1333 & Attansic L2 >> > >> > >> >Hello! >> >I'm trying to use the network card included in my ASUS P5GC-MX/1333 >> >motherboard, with no success. >> >I've installed OpenSolaris 2009.06 64 bits, and downloaded the drivers >> >from the Device Driver Utility recommended site. I've copied the >> >amd64/atge drivers to the /kernel/drv/amd64 directory, and then added >> >the driver with add_drv -i '"pci1969,2048"'. >> >After running this command, I get no message. I understand that this >> >mean the driver was successfully added, but the light in my router never >> >turns on. >> >I've plumbed the interface, gave an IP, etc., just to see if there is >> >some trick about this driver. >> >but it does not work. I saw at >> >http://bugs.opensolaris.org/view_bug.do?bug_id=6677682 that the driver >> >is going to be included in the snv_123 release. Is there some place >> >where I can find the driver being worked, just to try it in my box? >> >Thanks, and best regards. >> > >> >HeCSa. >> >> Would you show the output of ifconfig -a by root, as I'd like to check >> if the driver got the mac address correctly. >> >> And would you show log lines from atge driver in /var/adm/messages, >> as I'd like to check if the atge driver was initialized correctly. >> >> -masa >> > > > >-- >HeCSa _______________________________________________ driver-discuss mailing list [email protected] http://mail.opensolaris.org/mailman/listinfo/driver-discuss
