The transfer scheduler in the dwc2 driver is pretty basic, not to
mention buggy. It works fairly well with just a couple of devices
plugged in, but if you add, say, multiple devices with periodic
endpoints, the scheduler breaks down and can't even enumerate all
the devices.
To fix this, import the "microframe scheduler" patch from the
driver in the downstream Raspberry Pi kernel, which is based on
the Synopsys vendor driver. That patch was done by the guys from
raspberrypi.org, including at least Gordon Hollingsworth and
"popcornmix".
I have added a driver parameter for this, enabled by default, in
case anyone has problems with it and needs to disable it. I don't
think we should add a DT binding for that, though, since I plan to
remove the option once any bugs are fixed.
Signed-off-by: Paul Zimmerman <pa...@synopsys.com>
---
Gordon, I would like to add a copyright notice for the work you
guys did on this (thanks!). Can you send me the names and dates I
should add?
This patch should be applied on top of "staging: dwc2: add driver
parameter to set AHB config register value" or else it won't apply
cleanly.
drivers/staging/dwc2/core.c | 21 ++++
drivers/staging/dwc2/core.h | 47 +++++---
drivers/staging/dwc2/hcd.c | 94 +++++++++++++---
drivers/staging/dwc2/hcd.h | 27 +++--
drivers/staging/dwc2/hcd_ddma.c | 13 ++-
drivers/staging/dwc2/hcd_intr.c | 59 +++++++---
drivers/staging/dwc2/hcd_queue.c | 236 ++++++++++++++++++++++++++++++++++++---
drivers/staging/dwc2/pci.c | 1 +
8 files changed, 417 insertions(+), 81 deletions(-)
diff --git a/drivers/staging/dwc2/core.c b/drivers/staging/dwc2/core.c
index a090f79..16afc06 100644
--- a/drivers/staging/dwc2/core.c
+++ b/drivers/staging/dwc2/core.c
@@ -2612,6 +2612,26 @@ int dwc2_set_param_otg_ver(struct dwc2_hsotg *hsotg, int
val)
return retval;
}
+int dwc2_set_param_uframe_sched(struct dwc2_hsotg *hsotg, int val)
+{
+ int retval = 0;
+
+ if (DWC2_PARAM_TEST(val, 0, 1)) {
+ if (val >= 0) {
+ dev_err(hsotg->dev,
+ "'%d' invalid for parameter uframe_sched\n",
+ val);
+ dev_err(hsotg->dev, "uframe_sched must be 0 or 1\n");
+ }
+ val = 1;
+ dev_dbg(hsotg->dev, "Setting uframe_sched to %d\n", val);
+ retval = -EINVAL;
+ }
+
+ hsotg->core_params->uframe_sched = val;
+ return retval;
+}
+
/*
* This function is called during module intialization to pass module
parameters
* for the DWC_otg core. It returns non-0 if any parameters are invalid.
@@ -2658,6 +2678,7 @@ int dwc2_set_parameters(struct dwc2_hsotg *hsotg,
retval |= dwc2_set_param_reload_ctl(hsotg, params->reload_ctl);
retval |= dwc2_set_param_ahbcfg(hsotg, params->ahbcfg);
retval |= dwc2_set_param_otg_ver(hsotg, params->otg_ver);
+ retval |= dwc2_set_param_uframe_sched(hsotg, params->uframe_sched);
return retval;
}
diff --git a/drivers/staging/dwc2/core.h b/drivers/staging/dwc2/core.h
index e771e40..3107a4f 100644
--- a/drivers/staging/dwc2/core.h
+++ b/drivers/staging/dwc2/core.h
@@ -74,6 +74,9 @@ enum dwc2_lx_state {
* 0 - HNP and SRP capable (default)
* 1 - SRP Only capable
* 2 - No HNP/SRP capable
+ * @otg_ver: OTG version supported
+ * 0 - 1.3
+ * 1 - 2.0
* @dma_enable: Specifies whether to use slave or DMA mode for
accessing
* the data FIFOs. The driver will automatically detect
the
* value for this parameter if none is specified.
@@ -90,20 +93,10 @@ enum dwc2_lx_state {
* the attached device and the value of phy_type.
* 0 - High Speed (default)
* 1 - Full Speed
- * @host_support_fs_ls_low_power: Specifies whether low power mode is supported
- * when attached to a Full Speed or Low Speed device in
- * host mode.
- * 0 - Don't support low power mode (default)
- * 1 - Support low power mode
- * @host_ls_low_power_phy_clk: Specifies the PHY clock rate in low power mode
- * when connected to a Low Speed device in host mode. This
- * parameter is applicable only if
- * host_support_fs_ls_low_power is enabled. If phy_type is
- * set to FS then defaults to 6 MHZ otherwise 48 MHZ.
- * 0 - 48 MHz
- * 1 - 6 MHz
* @enable_dynamic_fifo: 0 - Use coreConsultant-specified FIFO size parameters
* 1 - Allow dynamic FIFO sizing (default)
+ * @en_multiple_tx_fifo: Specifies whether dedicated per-endpoint transmit
FIFOs
+ * are enabled
* @host_rx_fifo_size: Number of 4-byte words in the Rx FIFO in host mode when
* dynamic FIFO sizing is enabled
* 16 to 32768 (default 1024)
@@ -145,9 +138,19 @@ enum dwc2_lx_state {
* 0 - No (default)
* 1 - Yes
* @ulpi_fs_ls: True to make ULPI phy operate in FS/LS mode only
+ * @host_support_fs_ls_low_power: Specifies whether low power mode is supported
+ * when attached to a Full Speed or Low Speed device in
+ * host mode.
+ * 0 - Don't support low power mode (default)
+ * 1 - Support low power mode
+ * @host_ls_low_power_phy_clk: Specifies the PHY clock rate in low power mode
+ * when connected to a Low Speed device in host mode. This
+ * parameter is applicable only if
+ * host_support_fs_ls_low_power is enabled. If phy_type is
+ * set to FS then defaults to 6 MHZ otherwise 48 MHZ.
+ * 0 - 48 MHz
+ * 1 - 6 MHz
* @ts_dline: True to enable Term Select Dline pulsing
- * @en_multiple_tx_fifo: Specifies whether dedicated per-endpoint transmit
FIFOs
- * are enabled
* @reload_ctl: True to allow dynamic reloading of HFIR register during
* runtime
* @ahbcfg: This field allows the default value of the GAHBCFG
@@ -155,9 +158,7 @@ enum dwc2_lx_state {
* -1 - GAHBCFG value will not be overridden
* all others - GAHBCFG value will be overridden with
* this value
- * @otg_ver: OTG version supported
- * 0 - 1.3
- * 1 - 2.0
+ * @uframe_sched: True to enable the microframe scheduler
*
* The following parameters may be specified when starting the module. These
* parameters define how the DWC_otg controller should be configured.
@@ -191,6 +192,7 @@ struct dwc2_core_params {
int ts_dline;
int reload_ctl;
int ahbcfg;
+ int uframe_sched;
};
/**
@@ -266,6 +268,7 @@ struct dwc2_core_params {
* This value is in microseconds per (micro)frame. The
* assumption is that all periodic transfers may occur in
* the same (micro)frame.
+ * @frame_usecs: Internal variable used by the microframe scheduler
* @frame_number: Frame number read from the core at SOF. The value
ranges
* from 0 to HFNUM_MAX_FRNUM.
* @periodic_qh_count: Count of periodic QHs, if using several eps. Used for
@@ -278,6 +281,8 @@ struct dwc2_core_params {
* host channel is available for non-periodic
transactions.
* @non_periodic_channels: Number of host channels assigned to non-periodic
* transfers
+ * @available_host_channels Number of host channels available for the
microframe
+ * scheduler to use
* @hc_ptr_array: Array of pointers to the host channel descriptors.
* Allows accessing a host channel descriptor given the
* host channel number. This is useful in interrupt
@@ -292,6 +297,9 @@ struct dwc2_core_params {
* @otg_port: OTG port number
* @frame_list: Frame list
* @frame_list_dma: Frame list DMA address
+ * @next_sched_frame: Internal variable used by the microframe scheduler
+ * @np_count: Internal variable used by the microframe scheduler
+ * @np_sent: Internal variable used by the microframe scheduler
*/
struct dwc2_hsotg {
struct device *dev;
@@ -338,6 +346,7 @@ struct dwc2_hsotg {
struct list_head periodic_sched_assigned;
struct list_head periodic_sched_queued;
u16 periodic_usecs;
+ u16 frame_usecs[8];
u16 frame_number;
u16 periodic_qh_count;
@@ -353,6 +362,7 @@ struct dwc2_hsotg {
struct list_head free_hc_list;
int periodic_channels;
int non_periodic_channels;
+ int available_host_channels;
struct dwc2_host_chan *hc_ptr_array[MAX_EPS_CHANNELS];
u8 *status_buf;
dma_addr_t status_buf_dma;
@@ -365,6 +375,9 @@ struct dwc2_hsotg {
u8 otg_port;
u32 *frame_list;
dma_addr_t frame_list_dma;
+ int next_sched_frame;
+ int np_count;
+ int np_sent;
/* DWC OTG HW Release versions */
#define DWC2_CORE_REV_2_71a 0x4f54271a
diff --git a/drivers/staging/dwc2/hcd.c b/drivers/staging/dwc2/hcd.c
index 962468f..51598bc 100644
--- a/drivers/staging/dwc2/hcd.c
+++ b/drivers/staging/dwc2/hcd.c
@@ -537,10 +537,15 @@ static void dwc2_hcd_reinit(struct dwc2_hsotg *hsotg)
int i;
hsotg->flags.d32 = 0;
-
hsotg->non_periodic_qh_ptr = &hsotg->non_periodic_sched_active;
- hsotg->non_periodic_channels = 0;
- hsotg->periodic_channels = 0;
+
+ if (hsotg->core_params->uframe_sched > 0) {
+ hsotg->available_host_channels =
+ hsotg->core_params->host_channels;
+ } else {
+ hsotg->non_periodic_channels = 0;
+ hsotg->periodic_channels = 0;
+ }
/*
* Put all channels in the free channel list and clean up channel
@@ -716,12 +721,13 @@ static int dwc2_hc_setup_align_buf(struct dwc2_hsotg
*hsotg, struct dwc2_qh *qh,
* @qh: Transactions from the first QTD for this QH are selected and
assigned
* to a free host channel
*/
-static void dwc2_assign_and_init_hc(struct dwc2_hsotg *hsotg,
- struct dwc2_qh *qh)
+static int dwc2_assign_and_init_hc(struct dwc2_hsotg *hsotg, struct dwc2_qh
*qh)
{
- struct dwc2_host_chan *chan;
+ struct list_head *hc_item, *hc_tmp;
+ struct dwc2_host_chan *chan = NULL;
struct dwc2_hcd_urb *urb;
struct dwc2_qtd *qtd;
+ u32 hcchar;
void *bufptr = NULL;
if (dbg_qh(qh))
@@ -729,22 +735,36 @@ static void dwc2_assign_and_init_hc(struct dwc2_hsotg
*hsotg,
if (list_empty(&qh->qtd_list)) {
dev_dbg(hsotg->dev, "No QTDs in QH list\n");
- return;
+ return -ENOMEM;
}
- if (list_empty(&hsotg->free_hc_list)) {
- dev_dbg(hsotg->dev, "No free channel to assign\n");
- return;
+ /* Find a free host channel with both CHENA and CHDIS clear */
+ list_for_each_safe(hc_item, hc_tmp, &hsotg->free_hc_list) {
+ chan = list_entry(hc_item, struct dwc2_host_chan,
+ hc_list_entry);
+ hcchar = readl(hsotg->regs + HCCHAR(chan->hc_num));
+ if ((hcchar & (HCCHAR_CHENA | HCCHAR_CHDIS)) == 0)
+ break;
+ /* Move channel to end of free list */
+ list_del(&chan->hc_list_entry);
+ list_add_tail(&chan->hc_list_entry, &hsotg->free_hc_list);
+ chan = NULL;
}
- chan = list_first_entry(&hsotg->free_hc_list, struct dwc2_host_chan,
- hc_list_entry);
+ if (!chan) {
+ dev_dbg(hsotg->dev, "No free channel to assign\n");
+ return -ENOMEM;
+ }
- /* Remove the host channel from the free list */
+ /* Remove host channel from free list */
list_del_init(&chan->hc_list_entry);
qtd = list_first_entry(&qh->qtd_list, struct dwc2_qtd, qtd_list_entry);
urb = qtd->urb;
+ if ((urb->actual_length < 0 || urb->actual_length > urb->length) &&
+ !dwc2_hcd_is_pipe_in(&urb->pipe_info))
+ urb->actual_length = urb->length;
+
qh->channel = chan;
qtd->in_process = 1;
@@ -817,7 +837,7 @@ static void dwc2_assign_and_init_hc(struct dwc2_hsotg
*hsotg,
&hsotg->free_hc_list);
qtd->in_process = 0;
qh->channel = NULL;
- return;
+ return -ENOMEM;
}
} else {
chan->align_buf = 0;
@@ -836,6 +856,8 @@ static void dwc2_assign_and_init_hc(struct dwc2_hsotg
*hsotg,
dwc2_hc_init(hsotg, chan);
chan->qh = qh;
+
+ return 0;
}
/**
@@ -864,8 +886,14 @@ enum dwc2_transaction_type dwc2_hcd_select_transactions(
while (qh_ptr != &hsotg->periodic_sched_ready) {
if (list_empty(&hsotg->free_hc_list))
break;
+ if (hsotg->core_params->uframe_sched > 0) {
+ if (hsotg->available_host_channels <= 1)
+ break;
+ hsotg->available_host_channels--;
+ }
qh = list_entry(qh_ptr, struct dwc2_qh, qh_list_entry);
- dwc2_assign_and_init_hc(hsotg, qh);
+ if (dwc2_assign_and_init_hc(hsotg, qh))
+ break;
/*
* Move the QH from the periodic ready schedule to the
@@ -884,13 +912,38 @@ enum dwc2_transaction_type dwc2_hcd_select_transactions(
num_channels = hsotg->core_params->host_channels;
qh_ptr = hsotg->non_periodic_sched_inactive.next;
while (qh_ptr != &hsotg->non_periodic_sched_inactive) {
- if (hsotg->non_periodic_channels >= num_channels -
+ if (hsotg->core_params->uframe_sched <= 0 &&
+ hsotg->non_periodic_channels >= num_channels -
hsotg->periodic_channels)
break;
if (list_empty(&hsotg->free_hc_list))
break;
qh = list_entry(qh_ptr, struct dwc2_qh, qh_list_entry);
- dwc2_assign_and_init_hc(hsotg, qh);
+
+ /*
+ * Check to see if this is a NAK'd retransmit, in which case
+ * ignore for retransmission. We hold off on bulk
+ * retransmissions to reduce NAK interrupt overhead for
+ * cheeky devices that just hold off using NAKs.
+ */
+ if (dwc2_full_frame_num(qh->nak_frame) ==
+ dwc2_full_frame_num(dwc2_hcd_get_frame_number(hsotg))) {
+ /* Make interrupt run on next frame (i.e. 8 uframes) */
+ hsotg->next_sched_frame = ((qh->nak_frame + 8) & ~7) &
+ HFNUM_MAX_FRNUM;
+ qh_ptr = qh_ptr->next;
+ continue;
+ } else {
+ qh->nak_frame = 0xffff;
+ }
+
+ if (hsotg->core_params->uframe_sched > 0) {
+ if (hsotg->available_host_channels < 1)
+ break;
+ hsotg->available_host_channels--;
+ }
+ if (dwc2_assign_and_init_hc(hsotg, qh))
+ break;
/*
* Move the QH from the non-periodic inactive schedule to the
@@ -899,13 +952,15 @@ enum dwc2_transaction_type dwc2_hcd_select_transactions(
qh_ptr = qh_ptr->next;
list_move(&qh->qh_list_entry,
&hsotg->non_periodic_sched_active);
+ hsotg->np_sent++;
if (ret_val == DWC2_TRANSACTION_NONE)
ret_val = DWC2_TRANSACTION_NON_PERIODIC;
else
ret_val = DWC2_TRANSACTION_ALL;
- hsotg->non_periodic_channels++;
+ if (hsotg->core_params->uframe_sched <= 0)
+ hsotg->non_periodic_channels++;
}
return ret_val;
@@ -2905,6 +2960,9 @@ int dwc2_hcd_init(struct dwc2_hsotg *hsotg, int irq,
hsotg->hc_ptr_array[i] = channel;
}
+ if (hsotg->core_params->uframe_sched > 0)
+ dwc2_hcd_init_usecs(hsotg);
+
/* Initialize hsotg start work */
INIT_DELAYED_WORK(&hsotg->start_work, dwc2_hcd_start_func);
diff --git a/drivers/staging/dwc2/hcd.h b/drivers/staging/dwc2/hcd.h
index 933e8d1..8558b0f 100644
--- a/drivers/staging/dwc2/hcd.h
+++ b/drivers/staging/dwc2/hcd.h
@@ -232,16 +232,21 @@ enum dwc2_transaction_type {
* - DWC2_HC_PID_DATA1
* @ping_state: Ping state
* @do_split: Full/low speed endpoint on high-speed hub requires
split
- * @qtd_list: List of QTDs for this QH
- * @channel: Host channel currently processing transfers for this QH
+ * @td_first: Index of first activated isochronous transfer
descriptor
+ * @td_last: Index of last activated isochronous transfer descriptor
* @usecs: Bandwidth in microseconds per (micro)frame
* @interval: Interval between transfers in (micro)frames
- * @sched_frame: (micro)frame to initialize a periodic transfer.
+ * @sched_frame: (Micro)frame to initialize a periodic transfer.
* The transfer executes in the following (micro)frame.
+ * @nak_frame: Internal variable used by the microframe scheduler
+ * @frame_usecs: Internal variable used by the microframe scheduler
* @start_split_frame: (Micro)frame at which last start split was initialized
+ * @ntd: Actual number of transfer descriptors in a list
* @dw_align_buf: Used instead of original buffer if its physical address
* is not dword-aligned
* @dw_align_buf_dma: DMA address for align_buf
+ * @qtd_list: List of QTDs for this QH
+ * @channel: Host channel currently processing transfers for this QH
* @qh_list_entry: Entry for QH in either the periodic or non-periodic
* schedule
* @desc_list: List of transfer descriptors
@@ -249,9 +254,6 @@ enum dwc2_transaction_type {
* @n_bytes: Xfer Bytes array. Each element corresponds to a
transfer
* descriptor and indicates original XferSize value for
the
* descriptor
- * @ntd: Actual number of transfer descriptors in a list
- * @td_first: Index of first activated isochronous transfer
descriptor
- * @td_last: Index of last activated isochronous transfer descriptor
* @tt_buffer_dirty True if clear_tt_buffer_complete is pending
*
* A Queue Head (QH) holds the static characteristics of an endpoint and
@@ -266,21 +268,23 @@ struct dwc2_qh {
u8 data_toggle;
u8 ping_state;
u8 do_split;
- struct list_head qtd_list;
- struct dwc2_host_chan *channel;
+ u8 td_first;
+ u8 td_last;
u16 usecs;
u16 interval;
u16 sched_frame;
+ u16 nak_frame;
+ u16 frame_usecs[8];
u16 start_split_frame;
+ u16 ntd;
u8 *dw_align_buf;
dma_addr_t dw_align_buf_dma;
+ struct list_head qtd_list;
+ struct dwc2_host_chan *channel;
struct list_head qh_list_entry;
struct dwc2_hcd_dma_desc *desc_list;
dma_addr_t desc_list_dma;
u32 *n_bytes;
- u16 ntd;
- u8 td_first;
- u8 td_last;
unsigned tt_buffer_dirty:1;
};
@@ -462,6 +466,7 @@ extern void dwc2_hcd_queue_transactions(struct dwc2_hsotg
*hsotg,
/* Schedule Queue Functions */
/* Implemented in hcd_queue.c */
+extern void dwc2_hcd_init_usecs(struct dwc2_hsotg *hsotg);
extern void dwc2_hcd_qh_free(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh);
extern int dwc2_hcd_qh_add(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh);
extern void dwc2_hcd_qh_unlink(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh);
diff --git a/drivers/staging/dwc2/hcd_ddma.c b/drivers/staging/dwc2/hcd_ddma.c
index de5af1b..ef2b42b 100644
--- a/drivers/staging/dwc2/hcd_ddma.c
+++ b/drivers/staging/dwc2/hcd_ddma.c
@@ -271,10 +271,14 @@ static void dwc2_release_channel_ddma(struct dwc2_hsotg
*hsotg,
{
struct dwc2_host_chan *chan = qh->channel;
- if (dwc2_qh_is_non_per(qh))
- hsotg->non_periodic_channels--;
- else
+ if (dwc2_qh_is_non_per(qh)) {
+ if (hsotg->core_params->uframe_sched > 0)
+ hsotg->available_host_channels++;
+ else
+ hsotg->non_periodic_channels--;
+ } else {
dwc2_update_frame_list(hsotg, qh, 0);
+ }
/*
* The condition is added to prevent double cleanup try in case of
@@ -370,7 +374,8 @@ void dwc2_hcd_qh_free_ddma(struct dwc2_hsotg *hsotg, struct
dwc2_qh *qh)
if ((qh->ep_type == USB_ENDPOINT_XFER_ISOC ||
qh->ep_type == USB_ENDPOINT_XFER_INT) &&
- !hsotg->periodic_channels && hsotg->frame_list) {
+ (hsotg->core_params->uframe_sched > 0 ||
+ !hsotg->periodic_channels) && hsotg->frame_list) {
dwc2_per_sched_disable(hsotg);
dwc2_frame_list_free(hsotg);
}
diff --git a/drivers/staging/dwc2/hcd_intr.c b/drivers/staging/dwc2/hcd_intr.c
index 9e68ef1..3ec9d38 100644
--- a/drivers/staging/dwc2/hcd_intr.c
+++ b/drivers/staging/dwc2/hcd_intr.c
@@ -118,9 +118,11 @@ static void dwc2_hc_handle_tt_clear(struct dwc2_hsotg
*hsotg,
*/
static void dwc2_sof_intr(struct dwc2_hsotg *hsotg)
{
+ enum dwc2_transaction_type tr_type;
struct list_head *qh_entry;
struct dwc2_qh *qh;
- enum dwc2_transaction_type tr_type;
+ int next_sched_frame = -1;
+ int did_something = 0;
#ifdef DEBUG_SOF
dev_vdbg(hsotg->dev, "--Start of Frame Interrupt--\n");
@@ -135,17 +137,29 @@ static void dwc2_sof_intr(struct dwc2_hsotg *hsotg)
while (qh_entry != &hsotg->periodic_sched_inactive) {
qh = list_entry(qh_entry, struct dwc2_qh, qh_list_entry);
qh_entry = qh_entry->next;
- if (dwc2_frame_num_le(qh->sched_frame, hsotg->frame_number))
+ if (dwc2_frame_num_le(qh->sched_frame, hsotg->frame_number)) {
/*
* Move QH to the ready list to be executed next
* (micro)frame
*/
list_move(&qh->qh_list_entry,
&hsotg->periodic_sched_ready);
+ did_something = 1;
+ } else {
+ if (next_sched_frame < 0 ||
+ dwc2_frame_num_le(qh->sched_frame,
+ next_sched_frame))
+ next_sched_frame = qh->sched_frame;
+ }
}
+
+ hsotg->next_sched_frame = next_sched_frame;
+
tr_type = dwc2_hcd_select_transactions(hsotg);
- if (tr_type != DWC2_TRANSACTION_NONE)
+ if (tr_type != DWC2_TRANSACTION_NONE) {
dwc2_hcd_queue_transactions(hsotg, tr_type);
+ did_something = 1;
+ }
/* Clear interrupt */
writel(GINTSTS_SOF, hsotg->regs + GINTSTS);
@@ -752,18 +766,23 @@ cleanup:
dwc2_hc_cleanup(hsotg, chan);
list_add_tail(&chan->hc_list_entry, &hsotg->free_hc_list);
- switch (chan->ep_type) {
- case USB_ENDPOINT_XFER_CONTROL:
- case USB_ENDPOINT_XFER_BULK:
- hsotg->non_periodic_channels--;
- break;
- default:
- /*
- * Don't release reservations for periodic channels here.
- * That's done when a periodic transfer is descheduled (i.e.
- * when the QH is removed from the periodic schedule).
- */
- break;
+ if (hsotg->core_params->uframe_sched > 0) {
+ hsotg->available_host_channels++;
+ } else {
+ switch (chan->ep_type) {
+ case USB_ENDPOINT_XFER_CONTROL:
+ case USB_ENDPOINT_XFER_BULK:
+ hsotg->non_periodic_channels--;
+ break;
+ default:
+ /*
+ * Don't release reservations for periodic channels
+ * here. That's done when a periodic transfer is
+ * descheduled (i.e. when the QH is removed from the
+ * periodic schedule).
+ */
+ break;
+ }
}
haintmsk = readl(hsotg->regs + HAINTMSK);
@@ -1205,6 +1224,16 @@ static void dwc2_hc_nak_intr(struct dwc2_hsotg *hsotg,
chnum);
/*
+ * When we get bulk NAKs then remember this so we holdoff on this qh
+ * until the beginning of the next frame
+ */
+ switch (dwc2_hcd_get_pipe_type(&qtd->urb->pipe_info)) {
+ case USB_ENDPOINT_XFER_BULK:
+ chan->qh->nak_frame = dwc2_hcd_get_frame_number(hsotg);
+ break;
+ }
+
+ /*
* Handle NAK for IN/OUT SSPLIT/CSPLIT transfers, bulk, control, and
* interrupt. Re-start the SSPLIT transfer.
*/
diff --git a/drivers/staging/dwc2/hcd_queue.c b/drivers/staging/dwc2/hcd_queue.c
index 5461e3b..2748cb9 100644
--- a/drivers/staging/dwc2/hcd_queue.c
+++ b/drivers/staging/dwc2/hcd_queue.c
@@ -83,6 +83,7 @@ static void dwc2_qh_init(struct dwc2_hsotg *hsotg, struct
dwc2_qh *qh,
dev_speed = dwc2_host_get_speed(hsotg, urb->priv);
dwc2_host_hub_info(hsotg, urb->priv, &hub_addr, &hub_port);
+ qh->nak_frame = 0xffff;
if ((dev_speed == USB_SPEED_LOW || dev_speed == USB_SPEED_FULL) &&
hub_addr != 0 && hub_addr != 1) {
@@ -324,6 +325,147 @@ static int dwc2_check_periodic_bandwidth(struct
dwc2_hsotg *hsotg,
}
/**
+ * Microframe scheduler
+ * track the total use in hsotg->frame_usecs
+ * keep each qh use in qh->frame_usecs
+ * when surrendering the qh then donate the time back
+ */
+static const unsigned short max_uframe_usecs[] = {
+ 100, 100, 100, 100, 100, 100, 30, 0
+};
+
+void dwc2_hcd_init_usecs(struct dwc2_hsotg *hsotg)
+{
+ int i;
+
+ hsotg->next_sched_frame = hsotg->np_count = hsotg->np_sent = 0;
+ for (i = 0; i < 8; i++)
+ hsotg->frame_usecs[i] = max_uframe_usecs[i];
+}
+
+static int dwc2_find_single_uframe(struct dwc2_hsotg *hsotg, struct dwc2_qh
*qh)
+{
+ unsigned short utime = qh->usecs;
+ int done = 0;
+ int i = 0;
+ int ret = -1;
+
+ while (!done) {
+ /* At the start hsotg->frame_usecs[i] = max_uframe_usecs[i] */
+ if (utime <= hsotg->frame_usecs[i]) {
+ hsotg->frame_usecs[i] -= utime;
+ qh->frame_usecs[i] += utime;
+ ret = i;
+ done = 1;
+ } else {
+ i++;
+ if (i == 8)
+ done = 1;
+ }
+ }
+
+ return ret;
+}
+
+/*
+ * use this for FS apps that can span multiple uframes
+ */
+static int dwc2_find_multi_uframe(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh)
+{
+ unsigned short utime = qh->usecs;
+ unsigned short xtime;
+ int t_left = utime;
+ int done = 0;
+ int i = 0;
+ int j;
+ int ret = -1;
+
+ while (!done) {
+ if (hsotg->frame_usecs[i] <= 0) {
+ i++;
+ if (i == 8) {
+ ret = -1;
+ done = 1;
+ }
+ continue;
+ }
+
+ /*
+ * we need n consecutive slots so use j as a start slot
+ * j plus j+1 must be enough time (for now)
+ */
+ xtime = hsotg->frame_usecs[i];
+ for (j = i + 1; j < 8; j++) {
+ /*
+ * if we add this frame remaining time to xtime we may
+ * be OK, if not we need to test j for a complete frame
+ */
+ if (xtime + hsotg->frame_usecs[j] < utime) {
+ if (hsotg->frame_usecs[j] <
+ max_uframe_usecs[j]) {
+ ret = -1;
+ break;
+ }
+ }
+ if (xtime >= utime) {
+ ret = i;
+ break;
+ }
+ /* add the frame time to x time */
+ xtime += hsotg->frame_usecs[j];
+ /* we must have a fully available next frame or break */
+ if (xtime < utime &&
+ hsotg->frame_usecs[j] == max_uframe_usecs[j]) {
+ ret = -1;
+ break;
+ }
+ }
+ if (ret >= 0) {
+ t_left = utime;
+ for (j = i; t_left > 0 && j < 8; j++) {
+ t_left -= hsotg->frame_usecs[j];
+ if (t_left <= 0) {
+ qh->frame_usecs[j] +=
+ hsotg->frame_usecs[j] + t_left;
+ hsotg->frame_usecs[j] = -t_left;
+ ret = i;
+ done = 1;
+ } else {
+ qh->frame_usecs[j] +=
+ hsotg->frame_usecs[j];
+ hsotg->frame_usecs[j] = 0;
+ }
+ }
+ } else {
+ i++;
+ if (i == 8) {
+ ret = -1;
+ done = 1;
+ }
+ }
+ }
+
+ return ret;
+}
+
+static int dwc2_find_uframe(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh)
+{
+ int ret;
+
+ if (qh->dev_speed == USB_SPEED_HIGH) {
+ /* if this is a hs transaction we need a full frame */
+ ret = dwc2_find_single_uframe(hsotg, qh);
+ } else {
+ /*
+ * if this is a fs transaction we may need a sequence
+ * of frames
+ */
+ ret = dwc2_find_multi_uframe(hsotg, qh);
+ }
+ return ret;
+}
+
+/**
* dwc2_check_max_xfer_size() - Checks that the max transfer size allowed in a
* host channel is large enough to handle the maximum data transfer in a single
* (micro)frame for a periodic transfer
@@ -367,15 +509,35 @@ static int dwc2_schedule_periodic(struct dwc2_hsotg
*hsotg, struct dwc2_qh *qh)
{
int status;
- status = dwc2_periodic_channel_available(hsotg);
- if (status) {
- dev_dbg(hsotg->dev,
- "%s: No host channel available for periodic transfer\n",
- __func__);
- return status;
+ if (hsotg->core_params->uframe_sched > 0) {
+ int frame = -1;
+
+ status = dwc2_find_uframe(hsotg, qh);
+ if (status == 0)
+ frame = 7;
+ else if (status > 0)
+ frame = status - 1;
+
+ /* Set the new frame up */
+ if (frame > -1) {
+ qh->sched_frame &= ~0x7;
+ qh->sched_frame |= (frame & 7);
+ }
+
+ if (status != -1)
+ status = 0;
+ } else {
+ status = dwc2_periodic_channel_available(hsotg);
+ if (status) {
+ dev_info(hsotg->dev,
+ "%s: No host channel available for periodic
transfer\n",
+ __func__);
+ return status;
+ }
+
+ status = dwc2_check_periodic_bandwidth(hsotg, qh);
}
- status = dwc2_check_periodic_bandwidth(hsotg, qh);
if (status) {
dev_dbg(hsotg->dev,
"%s: Insufficient periodic bandwidth for periodic
transfer\n",
@@ -391,16 +553,22 @@ static int dwc2_schedule_periodic(struct dwc2_hsotg
*hsotg, struct dwc2_qh *qh)
return status;
}
- if (hsotg->core_params->dma_desc_enable > 0)
+ if (hsotg->core_params->dma_desc_enable > 0) {
/* Don't rely on SOF and start in ready schedule */
list_add_tail(&qh->qh_list_entry, &hsotg->periodic_sched_ready);
- else
+ } else {
+ if (list_empty(&hsotg->periodic_sched_inactive) ||
+ dwc2_frame_num_le(qh->sched_frame, hsotg->next_sched_frame))
+ hsotg->next_sched_frame = qh->sched_frame;
+
/* Always start in inactive schedule */
list_add_tail(&qh->qh_list_entry,
&hsotg->periodic_sched_inactive);
+ }
- /* Reserve periodic channel */
- hsotg->periodic_channels++;
+ if (hsotg->core_params->uframe_sched <= 0)
+ /* Reserve periodic channel */
+ hsotg->periodic_channels++;
/* Update claimed usecs per (micro)frame */
hsotg->periodic_usecs += qh->usecs;
@@ -418,13 +586,22 @@ static int dwc2_schedule_periodic(struct dwc2_hsotg
*hsotg, struct dwc2_qh *qh)
static void dwc2_deschedule_periodic(struct dwc2_hsotg *hsotg,
struct dwc2_qh *qh)
{
- list_del_init(&qh->qh_list_entry);
+ int i;
- /* Release periodic channel reservation */
- hsotg->periodic_channels--;
+ list_del_init(&qh->qh_list_entry);
/* Update claimed usecs per (micro)frame */
hsotg->periodic_usecs -= qh->usecs;
+
+ if (hsotg->core_params->uframe_sched > 0) {
+ for (i = 0; i < 8; i++) {
+ hsotg->frame_usecs[i] += qh->frame_usecs[i];
+ qh->frame_usecs[i] = 0;
+ }
+ } else {
+ /* Release periodic channel reservation */
+ hsotg->periodic_channels--;
+ }
}
/**
@@ -454,6 +631,7 @@ int dwc2_hcd_qh_add(struct dwc2_hsotg *hsotg, struct
dwc2_qh *qh)
/* Always start in inactive schedule */
list_add_tail(&qh->qh_list_entry,
&hsotg->non_periodic_sched_inactive);
+ hsotg->np_count++;
} else {
status = dwc2_schedule_periodic(hsotg, qh);
if (status == 0) {
@@ -557,6 +735,23 @@ void dwc2_hcd_qh_deactivate(struct dwc2_hsotg *hsotg,
struct dwc2_qh *qh,
dev_vdbg(hsotg->dev, "%s()\n", __func__);
if (dwc2_qh_is_non_per(qh)) {
+ struct dwc2_qh *qh_tmp;
+ struct list_head *qh_list;
+
+ list_for_each(qh_list, &hsotg->non_periodic_sched_inactive) {
+ qh_tmp = list_entry(qh_list, struct dwc2_qh,
+ qh_list_entry);
+ if (qh_tmp == qh) {
+ /*
+ * IRQ is being disabled because this one never
+ * gets a np_count increment. This is still not
+ * absolutely correct, but it should fix itself
+ * with just an unnecessary extra interrupt.
+ */
+ hsotg->np_sent = hsotg->np_count;
+ }
+ }
+
dwc2_hcd_qh_unlink(hsotg, qh);
if (!list_empty(&qh->qtd_list))
/* Add back to inactive non-periodic schedule */
@@ -581,12 +776,21 @@ void dwc2_hcd_qh_deactivate(struct dwc2_hsotg *hsotg,
struct dwc2_qh *qh,
* Remove from periodic_sched_queued and move to
* appropriate queue
*/
- if (qh->sched_frame == frame_number)
+ if ((hsotg->core_params->uframe_sched > 0 &&
+ dwc2_frame_num_le(qh->sched_frame, frame_number))
+ || (hsotg->core_params->uframe_sched <= 0 &&
+ qh->sched_frame == frame_number)) {
list_move(&qh->qh_list_entry,
&hsotg->periodic_sched_ready);
- else
+ } else {
+ if (hsotg->core_params->uframe_sched > 0 &&
+ !dwc2_frame_num_le(hsotg->next_sched_frame,
+ qh->sched_frame))
+ hsotg->next_sched_frame =
+ qh->sched_frame;
list_move(&qh->qh_list_entry,
&hsotg->periodic_sched_inactive);
+ }
}
}
}
diff --git a/drivers/staging/dwc2/pci.c b/drivers/staging/dwc2/pci.c
index fdfbc71..ace8682 100644
--- a/drivers/staging/dwc2/pci.c
+++ b/drivers/staging/dwc2/pci.c
@@ -84,6 +84,7 @@ static const struct dwc2_core_params dwc2_module_params = {
.ts_dline = -1,
.reload_ctl = -1,
.ahbcfg = -1,
+ .uframe_sched = -1,
};
/**
--
1.8.2.rc0.16.g20a599e
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
