Introduce a helper function to reset the Z8536 CIO device.
Signed-off-by: H Hartley Sweeten <hswee...@visionengravers.com>
Cc: Ian Abbott <abbo...@mev.co.uk>
Cc: Greg Kroah-Hartman <gre...@linuxfoundation.org>
---
.../comedi/drivers/addi-data/hwdrv_apci1500.c | 185 ++++++++-------------
1 file changed, 69 insertions(+), 116 deletions(-)
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1500.c
b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1500.c
index d209d8e..50fecd4 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1500.c
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1500.c
@@ -146,6 +146,73 @@ static void z8536_write(struct comedi_device *dev,
outb(val, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
}
+static void z8536_reset(struct comedi_device *dev)
+{
+ struct apci1500_private *devpriv = dev->private;
+
+ /*
+ * Even if the state of the Z8536 is not known, the following
+ * sequence will reset it and put it in State 0.
+ */
+ inb(devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
+ outb(0, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
+ inb(devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
+ outb(0, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
+ outb(1, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
+ outb(0, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
+
+ z8536_write(dev, 0xf4, APCI1500_RW_MASTER_CONFIGURATION_CONTROL);
+
+ z8536_write(dev, 0x10, APCI1500_RW_PORT_A_SPECIFICATION);
+ /* High level of port A means 1 */
+ z8536_write(dev, 0xff, APCI1500_RW_PORT_A_DATA_PCITCH_POLARITY);
+ /* All bits used as inputs */
+ z8536_write(dev, 0xff, APCI1500_RW_PORT_A_DATA_DIRECTION);
+ /* Deletes IP and IUS */
+ z8536_write(dev, 0x20, APCI1500_RW_PORT_A_COMMAND_AND_STATUS);
+ /* Deactivates the interrupt management of port A */
+ z8536_write(dev, 0xe0, APCI1500_RW_PORT_A_COMMAND_AND_STATUS);
+ /* Deletes the register */
+ z8536_write(dev, 0x00, APCI1500_RW_PORT_A_HANDSHAKE_SPECIFICATION);
+
+ z8536_write(dev, 0x10, APCI1500_RW_PORT_B_SPECIFICATION);
+ /* A high level of port B means 1 */
+ z8536_write(dev, 0x7f, APCI1500_RW_PORT_B_DATA_PCITCH_POLARITY);
+ /* All bits used as inputs */
+ z8536_write(dev, 0xff, APCI1500_RW_PORT_B_DATA_DIRECTION);
+ /* Deletes IP and IUS */
+ z8536_write(dev, 0x20, APCI1500_RW_PORT_B_COMMAND_AND_STATUS);
+ /* Deactivates the interrupt management of port B */
+ z8536_write(dev, 0xe0, APCI1500_RW_PORT_B_COMMAND_AND_STATUS);
+ /* Deletes the register */
+ z8536_write(dev, 0x00, APCI1500_RW_PORT_B_HANDSHAKE_SPECIFICATION);
+
+ /* High level of port C means 1 */
+ z8536_write(dev, 0x09, APCI1500_RW_PORT_C_DATA_PCITCH_POLARITY);
+ /* All bits used as inputs except channel 1 */
+ z8536_write(dev, 0x0e, APCI1500_RW_PORT_C_DATA_DIRECTION);
+ /* Deletes it */
+ z8536_write(dev, 0x00, APCI1500_RW_PORT_C_SPECIAL_IO_CONTROL);
+
+ /* Deletes IP and IUS */
+ z8536_write(dev, 0x20, APCI1500_RW_CPT_TMR1_CMD_STATUS);
+ /* Deactivates the interrupt management of timer 1 */
+ z8536_write(dev, 0xe0, APCI1500_RW_CPT_TMR1_CMD_STATUS);
+
+ /* Deletes IP and IUS */
+ z8536_write(dev, 0x20, APCI1500_RW_CPT_TMR2_CMD_STATUS);
+ /* Deactivates Timer 2 interrupt management */
+ z8536_write(dev, 0xe0, APCI1500_RW_CPT_TMR2_CMD_STATUS);
+
+ /* Deletes IP and IUS */
+ z8536_write(dev, 0x20, APCI1500_RW_CPT_TMR3_CMD_STATUS);
+ /* Deactivates interrupt management of timer 3 */
+ z8536_write(dev, 0xe0, APCI1500_RW_CPT_TMR3_CMD_STATUS);
+
+ /* Deletes all interrupts */
+ z8536_write(dev, 0x00, APCI1500_RW_MASTER_INTERRUPT_CONTROL);
+}
+
/*
* An event can be generated for each port. The first event is related to the
* first 8 channels (port 1) and the second to the following 6 channels (port
2)
@@ -521,65 +588,8 @@ static int apci1500_di_read(struct comedi_device *dev,
struct comedi_insn *insn,
unsigned int *data)
{
- struct apci1500_private *devpriv = dev->private;
- int i_DummyRead = 0;
-
/* Software reset */
- i_DummyRead = inb(devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
- outb(0, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
- i_DummyRead = inb(devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
- outb(0, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
- outb(1, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
- outb(0, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
-
- z8536_write(dev, 0xf4, APCI1500_RW_MASTER_CONFIGURATION_CONTROL);
-
- z8536_write(dev, 0x10, APCI1500_RW_PORT_A_SPECIFICATION);
- /* High level of port A means 1 */
- z8536_write(dev, 0xff, APCI1500_RW_PORT_A_DATA_PCITCH_POLARITY);
- /* All bits used as inputs */
- z8536_write(dev, 0xff, APCI1500_RW_PORT_A_DATA_DIRECTION);
- /* Deletes IP and IUS */
- z8536_write(dev, 0x20, APCI1500_RW_PORT_A_COMMAND_AND_STATUS);
- /* Deactivates the interrupt management of port A */
- z8536_write(dev, 0xe0, APCI1500_RW_PORT_A_COMMAND_AND_STATUS);
- /* Deletes the register */
- z8536_write(dev, 0x00, APCI1500_RW_PORT_A_HANDSHAKE_SPECIFICATION);
-
- z8536_write(dev, 0x10, APCI1500_RW_PORT_B_SPECIFICATION);
- /* A high level of port B means 1 */
- z8536_write(dev, 0x7f, APCI1500_RW_PORT_B_DATA_PCITCH_POLARITY);
- /* All bits used as inputs */
- z8536_write(dev, 0xff, APCI1500_RW_PORT_B_DATA_DIRECTION);
- /* Deletes IP and IUS */
- z8536_write(dev, 0x20, APCI1500_RW_PORT_B_COMMAND_AND_STATUS);
- /* Deactivates the interrupt management of port B */
- z8536_write(dev, 0xe0, APCI1500_RW_PORT_B_COMMAND_AND_STATUS);
- /* Deletes the register */
- z8536_write(dev, 0x00, APCI1500_RW_PORT_B_HANDSHAKE_SPECIFICATION);
-
- /* High level of port C means 1 */
- z8536_write(dev, 0x09, APCI1500_RW_PORT_C_DATA_PCITCH_POLARITY);
- /* All bits used as inputs except channel 1 */
- z8536_write(dev, 0x0e, APCI1500_RW_PORT_C_DATA_DIRECTION);
- /* Deletes it */
- z8536_write(dev, 0x00, APCI1500_RW_PORT_C_SPECIAL_IO_CONTROL);
-
- /* Deletes IP and IUS */
- z8536_write(dev, 0x20, APCI1500_RW_CPT_TMR1_CMD_STATUS);
- /* Deactivates the interrupt management of timer 1 */
- z8536_write(dev, 0xe0, APCI1500_RW_CPT_TMR1_CMD_STATUS);
- /* Deletes IP and IUS */
- z8536_write(dev, 0x20, APCI1500_RW_CPT_TMR2_CMD_STATUS);
- /* Deactivates Timer 2 interrupt management */
- z8536_write(dev, 0xe0, APCI1500_RW_CPT_TMR2_CMD_STATUS);
- /* Deletes IP and IUS */
- z8536_write(dev, 0x20, APCI1500_RW_CPT_TMR3_CMD_STATUS);
- /* Deactivates interrupt management of timer 3 */
- z8536_write(dev, 0xe0, APCI1500_RW_CPT_TMR3_CMD_STATUS);
-
- /* Deletes all interrupts */
- z8536_write(dev, 0x00, APCI1500_RW_MASTER_INTERRUPT_CONTROL);
+ z8536_reset(dev);
return insn->n;
}
@@ -1601,7 +1611,6 @@ static irqreturn_t apci1500_interrupt(int irq, void *d)
static int apci1500_reset(struct comedi_device *dev)
{
struct apci1500_private *devpriv = dev->private;
- int i_DummyRead = 0;
i_TimerCounter1Init = 0;
i_TimerCounter2Init = 0;
@@ -1618,63 +1627,7 @@ static int apci1500_reset(struct comedi_device *dev)
i_WatchdogCounter3Enabled = 0;
/* Software reset */
- i_DummyRead = inb(devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
- outb(0, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
- i_DummyRead = inb(devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
- outb(0, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
- outb(1, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
- outb(0, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
-
- z8536_write(dev, 0xf4, APCI1500_RW_MASTER_CONFIGURATION_CONTROL);
-
- z8536_write(dev, 0x10, APCI1500_RW_PORT_A_SPECIFICATION);
- /* High level of port A means 1 */
- z8536_write(dev, 0xff, APCI1500_RW_PORT_A_DATA_PCITCH_POLARITY);
- /* All bits used as inputs */
- z8536_write(dev, 0xff, APCI1500_RW_PORT_A_DATA_DIRECTION);
- /* Deletes IP and IUS */
- z8536_write(dev, 0x20, APCI1500_RW_PORT_A_COMMAND_AND_STATUS);
- /* Deactivates the interrupt management of port A */
- z8536_write(dev, 0xe0, APCI1500_RW_PORT_A_COMMAND_AND_STATUS);
- /* Deletes the register */
- z8536_write(dev, 0x00, APCI1500_RW_PORT_A_HANDSHAKE_SPECIFICATION);
-
- z8536_write(dev, 0x10, APCI1500_RW_PORT_B_SPECIFICATION);
- /* A high level of port B means 1 */
- z8536_write(dev, 0x7f, APCI1500_RW_PORT_B_DATA_PCITCH_POLARITY);
- /* All bits used as inputs */
- z8536_write(dev, 0xff, APCI1500_RW_PORT_B_DATA_DIRECTION);
- /* Deletes IP and IUS */
- z8536_write(dev, 0x20, APCI1500_RW_PORT_B_COMMAND_AND_STATUS);
- /* Deactivates the interrupt management of port B */
- z8536_write(dev, 0xe0, APCI1500_RW_PORT_B_COMMAND_AND_STATUS);
- /* Deletes the register */
- z8536_write(dev, 0x00, APCI1500_RW_PORT_B_HANDSHAKE_SPECIFICATION);
-
- /* High level of port C means 1 */
- z8536_write(dev, 0x09, APCI1500_RW_PORT_C_DATA_PCITCH_POLARITY);
- /* All bits used as inputs except channel 1 */
- z8536_write(dev, 0x0e, APCI1500_RW_PORT_C_DATA_DIRECTION);
- /* Deletes it */
- z8536_write(dev, 0x00, APCI1500_RW_PORT_C_SPECIAL_IO_CONTROL);
-
- /* Deletes IP and IUS */
- z8536_write(dev, 0x20, APCI1500_RW_CPT_TMR1_CMD_STATUS);
- /* Deactivates the interrupt management of timer 1 */
- z8536_write(dev, 0xe0, APCI1500_RW_CPT_TMR1_CMD_STATUS);
-
- /* Deletes IP and IUS */
- z8536_write(dev, 0x20, APCI1500_RW_CPT_TMR2_CMD_STATUS);
- /* Deactivates Timer 2 interrupt management */
- z8536_write(dev, 0xe0, APCI1500_RW_CPT_TMR2_CMD_STATUS);
-
- /* Deletes IP and IUS */
- z8536_write(dev, 0x20, APCI1500_RW_CPT_TMR3_CMD_STATUS);
- /* Deactivates interrupt management of timer 3 */
- z8536_write(dev, 0xe0, APCI1500_RW_CPT_TMR3_CMD_STATUS);
-
- /* Deletes all interrupts */
- z8536_write(dev, 0x00, APCI1500_RW_MASTER_INTERRUPT_CONTROL);
+ z8536_reset(dev);
/* reset all the digital outputs */
outw(0x0, devpriv->i_IobaseAddon + APCI1500_DIGITAL_OP);
--
2.0.3
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
