On Mon, 19 Jan 2015, 敬锐 wrote: > On 01/18/2015 08:29 PM, Lee Jones wrote: > > On Thu, 15 Jan 2015, micky_ch...@realsil.com.cn wrote: > > > >> From: Micky Ching <micky_ch...@realsil.com.cn> > >> > >> update phy register value and using direct value instead of macros. > >> It is much easier to debug using constant value than a lot of macros. > >> We usually need compare the value directly to check the configure. > > NACK. This is the opposite of what I would like to see. > > > When we debug, we usually need to compare the value provided from hardware, > of course we can compare by print them to kernel log. but I think it more > convenient from source code. And we only set phy register when > initialize chip, > so the value will not scattered everywhere, we will not benefit from macros. > > if we want to know the meaning of setting, we can look at the register > define.
This is not acceptable and is the complete opposite of what we're trying to achieve. I promote readability (by humans) as one of the highest priorities when writing code. 0xFE6C is far from readable. > >> Signed-off-by: Micky Ching <micky_ch...@realsil.com.cn> > >> --- > >> drivers/mfd/rts5249.c | 46 ++++++++++++++-------------------------------- > >> 1 file changed, 14 insertions(+), 32 deletions(-) > >> > >> diff --git a/drivers/mfd/rts5249.c b/drivers/mfd/rts5249.c > >> index 2fe2854..00208d1 100644 > >> --- a/drivers/mfd/rts5249.c > >> +++ b/drivers/mfd/rts5249.c > >> @@ -132,57 +132,39 @@ static int rts5249_optimize_phy(struct rtsx_pcr *pcr) > >> if (err < 0) > >> return err; > >> > >> - err = rtsx_pci_write_phy_register(pcr, PHY_REG_REV, > >> - PHY_REG_REV_RESV | PHY_REG_REV_RXIDLE_LATCHED | > >> - PHY_REG_REV_P1_EN | PHY_REG_REV_RXIDLE_EN | > >> - PHY_REG_REV_RX_PWST | PHY_REG_REV_CLKREQ_DLY_TIMER_1_0 | > >> - PHY_REG_REV_STOP_CLKRD | PHY_REG_REV_STOP_CLKWR); > >> + err = rtsx_pci_write_phy_register(pcr, 0x19, 0xFE6C); > >> if (err < 0) > >> return err; > >> > >> msleep(1); > >> > >> - err = rtsx_pci_write_phy_register(pcr, PHY_BPCR, > >> - PHY_BPCR_IBRXSEL | PHY_BPCR_IBTXSEL | > >> - PHY_BPCR_IB_FILTER | PHY_BPCR_CMIRROR_EN); > >> + err = rtsx_pci_write_phy_register(pcr, 0x0A, 0x05C0); > >> if (err < 0) > >> return err; > >> - err = rtsx_pci_write_phy_register(pcr, PHY_PCR, > >> - PHY_PCR_FORCE_CODE | PHY_PCR_OOBS_CALI_50 | > >> - PHY_PCR_OOBS_VCM_08 | PHY_PCR_OOBS_SEN_90 | > >> - PHY_PCR_RSSI_EN); > >> + > >> + err = rtsx_pci_write_phy_register(pcr, 0x00, 0xBA43); > >> + if (err < 0) > >> + return err; > >> + err = rtsx_pci_write_phy_register(pcr, 0x03, 0xC152); > >> if (err < 0) > >> return err; > >> - err = rtsx_pci_write_phy_register(pcr, PHY_RCR2, > >> - PHY_RCR2_EMPHASE_EN | PHY_RCR2_NADJR | > >> - PHY_RCR2_CDR_CP_10 | PHY_RCR2_CDR_SR_2 | > >> - PHY_RCR2_FREQSEL_12 | PHY_RCR2_CPADJEN | > >> - PHY_RCR2_CDR_SC_8 | PHY_RCR2_CALIB_LATE); > >> + err = rtsx_pci_write_phy_register(pcr, 0x1E, 0x78EB); > >> if (err < 0) > >> return err; > >> - err = rtsx_pci_write_phy_register(pcr, PHY_FLD4, > >> - PHY_FLD4_FLDEN_SEL | PHY_FLD4_REQ_REF | > >> - PHY_FLD4_RXAMP_OFF | PHY_FLD4_REQ_ADDA | > >> - PHY_FLD4_BER_COUNT | PHY_FLD4_BER_TIMER | > >> - PHY_FLD4_BER_CHK_EN); > >> + err = rtsx_pci_write_phy_register(pcr, 0x05, 0x4600); > >> if (err < 0) > >> return err; > >> - err = rtsx_pci_write_phy_register(pcr, PHY_RDR, PHY_RDR_RXDSEL_1_9); > >> + err = rtsx_pci_write_phy_register(pcr, 0x02, 0x041F); > >> if (err < 0) > >> return err; > >> - err = rtsx_pci_write_phy_register(pcr, PHY_RCR1, > >> - PHY_RCR1_ADP_TIME | PHY_RCR1_VCO_COARSE); > >> + err = rtsx_pci_write_phy_register(pcr, 0x1D, 0x0824); > >> if (err < 0) > >> return err; > >> - err = rtsx_pci_write_phy_register(pcr, PHY_FLD3, > >> - PHY_FLD3_TIMER_4 | PHY_FLD3_TIMER_6 | > >> - PHY_FLD3_RXDELINK); > >> + err = rtsx_pci_write_phy_register(pcr, 0x08, 0x4FE4); > >> if (err < 0) > >> return err; > >> - return rtsx_pci_write_phy_register(pcr, PHY_TUNE, > >> - PHY_TUNE_TUNEREF_1_0 | PHY_TUNE_VBGSEL_1252 | > >> - PHY_TUNE_SDBUS_33 | PHY_TUNE_TUNED18 | > >> - PHY_TUNE_TUNED12); > >> + > >> + return 0; > >> } > >> > >> static int rts5249_turn_on_led(struct rtsx_pcr *pcr) -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog _______________________________________________ devel mailing list de...@linuxdriverproject.org http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
