On Thu, 15 Jan 2015, micky_ch...@realsil.com.cn wrote:
> From: Micky Ching <micky_ch...@realsil.com.cn>
>
> Add debug info when access register failed, this is useful for
> debug.
Pull the creation of the macro into another patch. I'm happy to apply
that, but I don't really want dbg prints scattered everywhere. Feel
free to keep this patch on a branch and apply it when you need it, but
I'm not keen on having them in Mainline.
> Signed-off-by: Micky Ching <micky_ch...@realsil.com.cn>
> ---
> drivers/mfd/rtsx_pcr.c | 22 +++++++++++++++++-----
> include/linux/mfd/rtsx_pci.h | 2 ++
> 2 files changed, 19 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/mfd/rtsx_pcr.c b/drivers/mfd/rtsx_pcr.c
> index 30f7ca8..92f5a41 100644
> --- a/drivers/mfd/rtsx_pcr.c
> +++ b/drivers/mfd/rtsx_pcr.c
> @@ -96,12 +96,16 @@ int rtsx_pci_write_register(struct rtsx_pcr *pcr, u16
> addr, u8 mask, u8 data)
> for (i = 0; i < MAX_RW_REG_CNT; i++) {
> val = rtsx_pci_readl(pcr, RTSX_HAIMR);
> if ((val & HAIMR_TRANS_END) == 0) {
> - if (data != (u8)val)
> + if (data != (u8)val) {
> + pcr_dbg(pcr, "write register 0x%02x failed\n",
> + addr);
> return -EIO;
> + }
> return 0;
> }
> }
>
> + pcr_dbg(pcr, "write register 0x%02x failed\n", addr);
> return -ETIMEDOUT;
> }
> EXPORT_SYMBOL_GPL(rtsx_pci_write_register);
> @@ -120,8 +124,10 @@ int rtsx_pci_read_register(struct rtsx_pcr *pcr, u16
> addr, u8 *data)
> break;
> }
>
> - if (i >= MAX_RW_REG_CNT)
> + if (i >= MAX_RW_REG_CNT) {
> + pcr_dbg(pcr, "read register 0x%02x failed\n", addr);
> return -ETIMEDOUT;
> + }
>
> if (data)
> *data = (u8)(val & 0xFF);
> @@ -157,8 +163,10 @@ int rtsx_pci_write_phy_register(struct rtsx_pcr *pcr, u8
> addr, u16 val)
> }
> }
>
> - if (!finished)
> + if (!finished) {
> + pcr_dbg(pcr, "write phy 0x%x failed\n", addr);
> return -ETIMEDOUT;
> + }
>
> return 0;
> }
> @@ -190,8 +198,10 @@ int rtsx_pci_read_phy_register(struct rtsx_pcr *pcr, u8
> addr, u16 *val)
> }
> }
>
> - if (!finished)
> + if (!finished) {
> + pcr_dbg(pcr, "read phy 0x%x failed\n", addr);
> return -ETIMEDOUT;
> + }
>
> rtsx_pci_init_cmd(pcr);
>
> @@ -199,8 +209,10 @@ int rtsx_pci_read_phy_register(struct rtsx_pcr *pcr, u8
> addr, u16 *val)
> rtsx_pci_add_cmd(pcr, READ_REG_CMD, PHYDATA1, 0, 0);
>
> err = rtsx_pci_send_cmd(pcr, 100);
> - if (err < 0)
> + if (err < 0) {
> + pcr_dbg(pcr, "read phy 0x%x failed\n", addr);
> return err;
> + }
>
> ptr = rtsx_pci_get_cmd_data(pcr);
> data = ((u16)ptr[1] << 8) | ptr[0];
> diff --git a/include/linux/mfd/rtsx_pci.h b/include/linux/mfd/rtsx_pci.h
> index e81f2bb..a680427 100644
> --- a/include/linux/mfd/rtsx_pci.h
> +++ b/include/linux/mfd/rtsx_pci.h
> @@ -838,6 +838,8 @@ struct rtsx_pcr {
> #define PCI_VID(pcr) ((pcr)->pci->vendor)
> #define PCI_PID(pcr) ((pcr)->pci->device)
>
> +#define pcr_dbg(pcr, fmt, arg...) \
> + dev_dbg(&(pcr)->pci->dev, fmt, ##arg)
> #define SDR104_PHASE(val) ((val) & 0xFF)
> #define SDR50_PHASE(val) (((val) >> 8) & 0xFF)
> #define DDR50_PHASE(val) (((val) >> 16) & 0xFF)
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
