Rename the CamelCase. Use the BIT() macro to define the bits.
Signed-off-by: H Hartley Sweeten <hswee...@visionengravers.com>
Cc: Ian Abbott <abbo...@mev.co.uk>
Cc: Greg Kroah-Hartman <gre...@linuxfoundation.org>
---
drivers/staging/comedi/drivers/ni_mio_common.c | 43 ++++++++++++--------------
drivers/staging/comedi/drivers/ni_stc.h | 28 ++++++++---------
2 files changed, 34 insertions(+), 37 deletions(-)
diff --git a/drivers/staging/comedi/drivers/ni_mio_common.c
b/drivers/staging/comedi/drivers/ni_mio_common.c
index 01015d7..7cbe9d9 100644
--- a/drivers/staging/comedi/drivers/ni_mio_common.c
+++ b/drivers/staging/comedi/drivers/ni_mio_common.c
@@ -329,7 +329,7 @@ static const struct mio_regmap m_series_stc_write_regmap[]
= {
[NISTC_DIO_OUT_REG] = { 0, 0 }, /* DOES NOT MAP CLEANLY */
[NISTC_DIO_CTRL_REG] = { 0, 0 }, /* DOES NOT MAP CLEANLY */
[NISTC_AI_MODE1_REG] = { 0x118, 2 },
- [AI_Mode_2_Register] = { 0x11a, 2 },
+ [NISTC_AI_MODE2_REG] = { 0x11a, 2 },
[AI_SI_Load_A_Registers] = { 0x11c, 4 },
[AI_SI_Load_B_Registers] = { 0x120, 4 },
[AI_SC_Load_A_Registers] = { 0x124, 4 },
@@ -1634,7 +1634,7 @@ static int ni_ai_reset(struct comedi_device *dev, struct
comedi_subdevice *s)
NISTC_AI_MODE1_RSVD
/*| NISTC_AI_MODE1_TRIGGER_ONCE */,
NISTC_AI_MODE1_REG);
- ni_stc_writew(dev, 0x0000, AI_Mode_2_Register);
+ ni_stc_writew(dev, 0, NISTC_AI_MODE2_REG);
/* generate FIFO interrupts on non-empty */
ni_stc_writew(dev, (0 << 6) | 0x0000, AI_Mode_3_Register);
if (devpriv->is_611x) {
@@ -2313,10 +2313,10 @@ static int ni_ai_cmd(struct comedi_device *dev, struct
comedi_subdevice *s)
}
}
- mode2 &= ~AI_Pre_Trigger;
- mode2 &= ~AI_SC_Initial_Load_Source;
- mode2 &= ~AI_SC_Reload_Mode;
- ni_stc_writew(dev, mode2, AI_Mode_2_Register);
+ mode2 &= ~NISTC_AI_MODE2_PRE_TRIGGER;
+ mode2 &= ~NISTC_AI_MODE2_SC_INIT_LOAD_SRC;
+ mode2 &= ~NISTC_AI_MODE2_SC_RELOAD_MODE;
+ ni_stc_writew(dev, mode2, NISTC_AI_MODE2_REG);
if (cmd->chanlist_len == 1 || devpriv->is_611x || devpriv->is_6143) {
start_stop_select |= AI_STOP_Polarity;
@@ -2374,7 +2374,7 @@ static int ni_ai_cmd(struct comedi_device *dev, struct
comedi_subdevice *s)
/*
stop bits for non 611x boards
AI_SI_Special_Trigger_Delay=0
- AI_Pre_Trigger=0
+ NISTC_AI_MODE2_PRE_TRIGGER=0
AI_START_STOP_Select_Register:
AI_START_Polarity=0 (?) rising edge
AI_START_Edge=1 edge triggered
@@ -2389,11 +2389,10 @@ static int ni_ai_cmd(struct comedi_device *dev, struct
comedi_subdevice *s)
ni_stc_writew(dev, start_stop_select,
AI_START_STOP_Select_Register);
- mode2 |= AI_SI_Reload_Mode(0);
- /* AI_SI_Initial_Load_Source=A */
- mode2 &= ~AI_SI_Initial_Load_Source;
- /* mode2 |= AI_SC_Reload_Mode; */
- ni_stc_writew(dev, mode2, AI_Mode_2_Register);
+ mode2 &= ~NISTC_AI_MODE2_SI_INIT_LOAD_SRC; /* A */
+ mode2 |= NISTC_AI_MODE2_SI_RELOAD_MODE(0);
+ /* mode2 |= NISTC_AI_MODE2_SC_RELOAD_MODE; */
+ ni_stc_writew(dev, mode2, NISTC_AI_MODE2_REG);
/* load SI */
timer = ni_ns_to_timer(dev, cmd->scan_begin_arg,
@@ -2430,18 +2429,15 @@ static int ni_ai_cmd(struct comedi_device *dev, struct
comedi_subdevice *s)
ni_stc_writew(dev, 1, AI_SI2_Load_A_Register);
ni_stc_writew(dev, timer, AI_SI2_Load_B_Register);
- /* AI_SI2_Reload_Mode = alternate */
- /* AI_SI2_Initial_Load_Source = A */
- mode2 &= ~AI_SI2_Initial_Load_Source;
- mode2 |= AI_SI2_Reload_Mode;
- ni_stc_writew(dev, mode2, AI_Mode_2_Register);
+ mode2 &= ~NISTC_AI_MODE2_SI2_INIT_LOAD_SRC; /* A */
+ mode2 |= NISTC_AI_MODE2_SI2_RELOAD_MODE; /* alternate */
+ ni_stc_writew(dev, mode2, NISTC_AI_MODE2_REG);
ni_stc_writew(dev, NISTC_AI_CMD1_SI2_LOAD, NISTC_AI_CMD1_REG);
- mode2 |= AI_SI2_Reload_Mode; /* alternate */
- mode2 |= AI_SI2_Initial_Load_Source; /* B */
-
- ni_stc_writew(dev, mode2, AI_Mode_2_Register);
+ mode2 |= NISTC_AI_MODE2_SI2_INIT_LOAD_SRC; /* B */
+ mode2 |= NISTC_AI_MODE2_SI2_RELOAD_MODE; /* alternate */
+ ni_stc_writew(dev, mode2, NISTC_AI_MODE2_REG);
break;
case TRIG_EXT:
mode1 |= NISTC_AI_MODE1_CONVERT_SRC(1 + cmd->convert_arg);
@@ -2449,8 +2445,9 @@ static int ni_ai_cmd(struct comedi_device *dev, struct
comedi_subdevice *s)
mode1 |= NISTC_AI_MODE1_CONVERT_POLARITY;
ni_stc_writew(dev, mode1, NISTC_AI_MODE1_REG);
- mode2 |= AI_Start_Stop_Gate_Enable | AI_SC_Gate_Enable;
- ni_stc_writew(dev, mode2, AI_Mode_2_Register);
+ mode2 |= NISTC_AI_MODE2_SC_GATE_ENA |
+ NISTC_AI_MODE2_START_STOP_GATE_ENA;
+ ni_stc_writew(dev, mode2, NISTC_AI_MODE2_REG);
break;
}
diff --git a/drivers/staging/comedi/drivers/ni_stc.h
b/drivers/staging/comedi/drivers/ni_stc.h
index 315579e..739061a 100644
--- a/drivers/staging/comedi/drivers/ni_stc.h
+++ b/drivers/staging/comedi/drivers/ni_stc.h
@@ -190,6 +190,20 @@
#define NISTC_AI_MODE1_CONTINUOUS BIT(1)
#define NISTC_AI_MODE1_TRIGGER_ONCE BIT(0)
+#define NISTC_AI_MODE2_REG 13
+#define NISTC_AI_MODE2_SC_GATE_ENA BIT(15)
+#define NISTC_AI_MODE2_START_STOP_GATE_ENA BIT(14)
+#define NISTC_AI_MODE2_PRE_TRIGGER BIT(13)
+#define NISTC_AI_MODE2_EXTMUX_PRESENT BIT(12)
+#define NISTC_AI_MODE2_SI2_INIT_LOAD_SRC BIT(9)
+#define NISTC_AI_MODE2_SI2_RELOAD_MODE BIT(8)
+#define NISTC_AI_MODE2_SI_INIT_LOAD_SRC BIT(7)
+#define NISTC_AI_MODE2_SI_RELOAD_MODE(x) (((x) & 0x7) << 4)
+#define NISTC_AI_MODE2_SI_WR_SWITCH BIT(3)
+#define NISTC_AI_MODE2_SC_INIT_LOAD_SRC BIT(2)
+#define NISTC_AI_MODE2_SC_RELOAD_MODE BIT(1)
+#define NISTC_AI_MODE2_SC_WR_SWITCH BIT(0)
+
#define AI_Status_1_Register 2
#define Interrupt_A_St 0x8000
#define AI_FIFO_Full_St 0x4000
@@ -232,20 +246,6 @@
#define DIO_Parallel_Input_Register 7
-#define AI_Mode_2_Register 13
-#define AI_SC_Gate_Enable _bit15
-#define AI_Start_Stop_Gate_Enable _bit14
-#define AI_Pre_Trigger _bit13
-#define AI_External_MUX_Present _bit12
-#define AI_SI2_Initial_Load_Source _bit9
-#define AI_SI2_Reload_Mode _bit8
-#define AI_SI_Initial_Load_Source _bit7
-#define AI_SI_Reload_Mode(a) (((a) & 0x7)<<4)
-#define AI_SI_Write_Switch _bit3
-#define AI_SC_Initial_Load_Source _bit2
-#define AI_SC_Reload_Mode _bit1
-#define AI_SC_Write_Switch _bit0
-
#define AI_SI_Load_A_Registers 14
#define AI_SI_Load_B_Registers 16
#define AI_SC_Load_A_Registers 18
--
2.3.0
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
