Use two separate functions for spi and platform bus
(flexfb_set_spi_bus_func and flexfb_set_platform_bus_func,
respectively) to set the appropriate write operations.
This patch corrects the following checkpatch errors:
WARNING:LONG_LiINE at lines 446, 450, 466, 476, 489 and 495.
CHECK:PARENTHESIS_ALIGNMENT at line 459.
Signed-off-by: Fabio Falzoi <fabio.falzo...@gmail.com>
---
drivers/staging/fbtft/flexfb.c | 154 +++++++++++++++++++++++++----------------
1 file changed, 94 insertions(+), 60 deletions(-)
diff --git a/drivers/staging/fbtft/flexfb.c b/drivers/staging/fbtft/flexfb.c
index dae092a..1b833f9 100644
--- a/drivers/staging/fbtft/flexfb.c
+++ b/drivers/staging/fbtft/flexfb.c
@@ -382,6 +382,94 @@ static int flexfb_set_regwrite_func(const struct device
*dev,
return 0;
}
+static int flexfb_emulate_spi_8(struct fbtft_par *par, struct spi_device *sdev)
+{
+ struct device *dev = &sdev->dev;
+ int ret;
+
+ dev_warn(dev, "9-bit SPI not available, emulating using 8-bit.\n");
+ sdev->bits_per_word = 8;
+ ret = sdev->master->setup(sdev);
+ if (ret)
+ return ret;
+
+ /* allocate buffer with room for dc bits */
+ par->extra = devm_kzalloc(par->info->device,
+ par->txbuf.len + (par->txbuf.len / 8) + 8,
+ GFP_KERNEL);
+ if (!par->extra)
+ return -ENOMEM;
+ par->fbtftops.write = fbtft_write_spi_emulate_9;
+
+ return 0;
+}
+
+static int flexfb_set_spi_bus_func(struct fbtft_par *par,
+ struct spi_device *sdev)
+{
+ struct device *dev = &sdev->dev;
+ int ret;
+
+ par->fbtftops.write = fbtft_write_spi;
+ switch (buswidth) {
+ case 8:
+ par->fbtftops.write_vmem = fbtft_write_vmem16_bus8;
+ if (!par->startbyte)
+ par->fbtftops.verify_gpios = flexfb_verify_gpios_dc;
+ break;
+ case 9:
+ if (regwidth == 16) {
+ dev_err(dev, "argument 'regwidth': %d is not supported
with buswidth=%d and SPI.\n",
+ regwidth, buswidth);
+ return -EINVAL;
+ }
+ par->fbtftops.write_register = fbtft_write_reg8_bus9;
+ par->fbtftops.write_vmem = fbtft_write_vmem16_bus9;
+ sdev->bits_per_word = 9;
+ ret = sdev->master->setup(sdev);
+ if (ret) {
+ ret = flexfb_emulate_spi_8(par, sdev);
+ if (ret)
+ return ret;
+ }
+ break;
+ default:
+ dev_err(dev, "argument 'buswidth': %d is not supported with
SPI.\n",
+ buswidth);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int flexfb_set_platform_bus_func(struct fbtft_par *par,
+ struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+
+ par->fbtftops.verify_gpios = flexfb_verify_gpios_db;
+ switch (buswidth) {
+ case 8:
+ par->fbtftops.write = fbtft_write_gpio8_wr;
+ par->fbtftops.write_vmem = fbtft_write_vmem16_bus8;
+ break;
+ case 16:
+ par->fbtftops.write_register = fbtft_write_reg16_bus16;
+ if (latched)
+ par->fbtftops.write = fbtft_write_gpio16_wr_latched;
+ else
+ par->fbtftops.write = fbtft_write_gpio16_wr;
+ par->fbtftops.write_vmem = fbtft_write_vmem16_bus16;
+ break;
+ default:
+ dev_err(dev, "argument 'buswidth': %d is not supported with
parallel.\n",
+ buswidth);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
static int flexfb_probe_common(struct spi_device *sdev,
struct platform_device *pdev)
{
@@ -436,66 +524,12 @@ static int flexfb_probe_common(struct spi_device *sdev,
if (ret)
goto out_release;
- /* bus functions */
- if (sdev) {
- par->fbtftops.write = fbtft_write_spi;
- switch (buswidth) {
- case 8:
- par->fbtftops.write_vmem = fbtft_write_vmem16_bus8;
- if (!par->startbyte)
- par->fbtftops.verify_gpios =
flexfb_verify_gpios_dc;
- break;
- case 9:
- if (regwidth == 16) {
- dev_err(dev, "argument 'regwidth': %d is not
supported with buswidth=%d and SPI.\n", regwidth, buswidth);
- return -EINVAL;
- }
- par->fbtftops.write_register = fbtft_write_reg8_bus9;
- par->fbtftops.write_vmem = fbtft_write_vmem16_bus9;
- sdev->bits_per_word = 9;
- ret = sdev->master->setup(sdev);
- if (ret) {
- dev_warn(dev,
- "9-bit SPI not available, emulating
using 8-bit.\n");
- sdev->bits_per_word = 8;
- ret = sdev->master->setup(sdev);
- if (ret)
- goto out_release;
- /* allocate buffer with room for dc bits */
- par->extra = devm_kzalloc(par->info->device,
- par->txbuf.len +
(par->txbuf.len / 8) + 8,
- GFP_KERNEL);
- if (!par->extra) {
- ret = -ENOMEM;
- goto out_release;
- }
- par->fbtftops.write = fbtft_write_spi_emulate_9;
- }
- break;
- default:
- dev_err(dev, "argument 'buswidth': %d is not supported
with SPI.\n", buswidth);
- return -EINVAL;
- }
- } else {
- par->fbtftops.verify_gpios = flexfb_verify_gpios_db;
- switch (buswidth) {
- case 8:
- par->fbtftops.write = fbtft_write_gpio8_wr;
- par->fbtftops.write_vmem = fbtft_write_vmem16_bus8;
- break;
- case 16:
- par->fbtftops.write_register = fbtft_write_reg16_bus16;
- if (latched)
- par->fbtftops.write =
fbtft_write_gpio16_wr_latched;
- else
- par->fbtftops.write = fbtft_write_gpio16_wr;
- par->fbtftops.write_vmem = fbtft_write_vmem16_bus16;
- break;
- default:
- dev_err(dev, "argument 'buswidth': %d is not supported
with parallel.\n", buswidth);
- return -EINVAL;
- }
- }
+ if (sdev)
+ ret = flexfb_set_spi_bus_func(par, sdev);
+ else
+ ret = flexfb_set_platform_bus_func(par, pdev);
+ if (ret)
+ goto out_release;
/* set_addr_win function */
switch (setaddrwin) {
--
2.1.4
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
