Driver probe function is a mess and need a very big refactor.
Factor out mt7621_pci_enable_irqs and mt7621_pci_disable to
handle interrupts if pci status is as expected. To get the correct
bits for each controller define a new 'pcie_controller_data'
including clk_en, rst, irq and offset fields. Controller number
will be the array index 'pcie_controllers' which subs the 'offsets'
array.
Signed-off-by: Sergio Paracuellos <sergio.paracuel...@gmail.com>
---
drivers/staging/mt7621-pci/pci-mt7621.c | 120 ++++++++++++++++++--------------
1 file changed, 67 insertions(+), 53 deletions(-)
diff --git a/drivers/staging/mt7621-pci/pci-mt7621.c
b/drivers/staging/mt7621-pci/pci-mt7621.c
index c9da849..289d983 100644
--- a/drivers/staging/mt7621-pci/pci-mt7621.c
+++ b/drivers/staging/mt7621-pci/pci-mt7621.c
@@ -63,6 +63,8 @@
* devices.
*/
+#define PCI_MAX_CONTROLLERS 3
+
#define RALINK_PCIE0_CLK_EN BIT(24)
#define RALINK_PCIE1_CLK_EN BIT(25)
#define RALINK_PCIE2_CLK_EN BIT(26)
@@ -74,24 +76,50 @@
#define RALINK_PCIE0_RST BIT(24)
#define RALINK_PCIE1_RST BIT(25)
#define RALINK_PCIE2_RST BIT(26)
+#define RALINK_PCIE0_IRQ BIT(20)
+#define RALINK_PCIE1_IRQ BIT(21)
+#define RALINK_PCIE2_IRQ BIT(22)
#define RALINK_PCI_PCICFG_ADDR 0x0000
#define RALINK_PCI_PCIMSK_ADDR 0x000C
#define RALINK_PCI_BASE 0xBE140000
+struct pcie_controller_data {
+ u32 offset;
+ u32 clk_en;
+ u32 rst;
+ u32 irq;
+};
-static u16 pcie_controller_offsets[] = {
- 0x2000, 0x3000, 0x4000,
+static struct pcie_controller_data pcie_controllers[] = {
+ {
+ .offset = 0x2000,
+ .clk_en = RALINK_PCIE0_CLK_EN,
+ .rst = RALINK_PCIE0_RST,
+ .irq = RALINK_PCIE0_IRQ,
+ },
+ {
+ .offset = 0x3000,
+ .clk_en = RALINK_PCIE1_CLK_EN,
+ .rst = RALINK_PCIE1_RST,
+ .irq = RALINK_PCIE1_IRQ,
+ },
+ {
+ .offset = 0x4000,
+ .clk_en = RALINK_PCIE2_CLK_EN,
+ .rst = RALINK_PCIE2_RST,
+ .irq = RALINK_PCIE2_IRQ,
+ },
};
-#define RALINK_PCI_BAR0SETUP_ADDR(dev) (pcie_controller_offsets[(dev)] +
0x0010)
-#define RALINK_PCI_IMBASEBAR0_ADDR(dev) (pcie_controller_offsets[(dev)]
+ 0x0018)
-#define RALINK_PCI_ID(dev) (pcie_controller_offsets[(dev)] +
0x0030)
-#define RALINK_PCI_CLASS(dev) (pcie_controller_offsets[(dev)] +
0x0034)
-#define RALINK_PCI_SUBID(dev) (pcie_controller_offsets[(dev)] +
0x0038)
-#define RALINK_PCI_STATUS(dev) (pcie_controller_offsets[(dev)] +
0x0050)
-#define RALINK_PCI_DERR(dev) (pcie_controller_offsets[(dev)] +
0x0060)
-#define RALINK_PCI_ECRC(dev) (pcie_controller_offsets[(dev)] +
0x0064)
+#define RALINK_PCI_BAR0SETUP_ADDR(dev) (pcie_controllers[(dev)].offset +
0x0010)
+#define RALINK_PCI_IMBASEBAR0_ADDR(dev) (pcie_controllers[(dev)].offset
+ 0x0018)
+#define RALINK_PCI_ID(dev) (pcie_controllers[(dev)].offset +
0x0030)
+#define RALINK_PCI_CLASS(dev) (pcie_controllers[(dev)].offset +
0x0034)
+#define RALINK_PCI_SUBID(dev) (pcie_controllers[(dev)].offset +
0x0038)
+#define RALINK_PCI_STATUS(dev) (pcie_controllers[(dev)].offset +
0x0050)
+#define RALINK_PCI_DERR(dev) (pcie_controllers[(dev)].offset +
0x0060)
+#define RALINK_PCI_ECRC(dev) (pcie_controllers[(dev)].offset +
0x0064)
#define RALINK_PCIEPHY_P0P1_CTL_OFFSET 0x9000
#define RALINK_PCIEPHY_P2_CTL_OFFSET 0xA000
@@ -404,8 +432,32 @@ void setup_cm_memory_region(struct resource *mem_resource)
}
}
+static void mt7621_pci_disable(u8 controller)
+{
+ mt7621_pcie_assert_sysrst(pcie_controllers[controller].rst);
+ rt_sysc_m32(pcie_controllers[controller].clk_en, 0, RALINK_CLKCFG1);
+ pcie_link_status &= ~(1 << controller);
+}
+
+static void mt7621_pci_enable_irqs(u8 controller)
+{
+ u32 mask;
+
+ if ((mt7621_pci_reg_read(RALINK_PCI_STATUS(controller)) & 0x1) == 0) {
+ printk("PCIE0 no card, disable it(RST&CLK)\n");
+ mt7621_pci_disable(controller);
+ return;
+ }
+
+ pcie_link_status |= (1 << controller);
+ mask = mt7621_pci_reg_read(RALINK_PCI_PCIMSK_ADDR);
+ mask |= pcie_controllers[controller].irq;
+ mt7621_pci_reg_write(mask, RALINK_PCI_PCIMSK_ADDR);
+}
+
static int mt7621_pci_probe(struct platform_device *pdev)
{
+ int i;
u32 mask;
u32 val;
@@ -415,11 +467,8 @@ static int mt7621_pci_probe(struct platform_device *pdev)
ioport_resource.start = 0;
ioport_resource.end = ~0;
- val = RALINK_PCIE0_RST;
- val |= RALINK_PCIE1_RST;
- val |= RALINK_PCIE2_RST;
-
- mt7621_pcie_assert_sysrst(RALINK_PCIE0_RST | RALINK_PCIE1_RST |
RALINK_PCIE2_RST);
+ val = (RALINK_PCIE0_RST | RALINK_PCIE1_RST | RALINK_PCIE2_RST);
+ mt7621_pcie_assert_sysrst(val);
*(unsigned int *)(0xbe000060) &= ~(0x3<<10 | 0x3<<3);
*(unsigned int *)(0xbe000060) |= 0x1<<10 | 0x1<<3;
@@ -430,10 +479,7 @@ static int mt7621_pci_probe(struct platform_device *pdev)
mdelay(100);
- val = RALINK_PCIE0_RST;
- val |= RALINK_PCIE1_RST;
- val |= RALINK_PCIE2_RST;
-
+ val = (RALINK_PCIE0_RST | RALINK_PCIE1_RST | RALINK_PCIE2_RST);
mt7621_pcie_deassert_sysrst(val);
if ((*(unsigned int *)(0xbe00000c)&0xFFFF) == 0x0101) // MT7621 E2
@@ -463,41 +509,9 @@ static int mt7621_pci_probe(struct platform_device *pdev)
*(unsigned int *)(0xbe000620) |= 0x1<<19 | 0x1<<8 | 0x1<<7;
// set DATA
mdelay(1000);
- if ((mt7621_pci_reg_read(RALINK_PCI_STATUS(0)) & 0x1) == 0) {
- printk("PCIE0 no card, disable it(RST&CLK)\n");
- mt7621_pcie_assert_sysrst(RALINK_PCIE0_RST);
- rt_sysc_m32(RALINK_PCIE0_CLK_EN, 0, RALINK_CLKCFG1);
- pcie_link_status &= ~(1<<0);
- } else {
- pcie_link_status |= 1<<0;
- mask = mt7621_pci_reg_read(RALINK_PCI_PCIMSK_ADDR);
- mask |= (1<<20); // enable pcie1 interrupt
- mt7621_pci_reg_write(mask, RALINK_PCI_PCIMSK_ADDR);
- }
- if ((mt7621_pci_reg_read(RALINK_PCI_STATUS(1)) & 0x1) == 0) {
- printk("PCIE1 no card, disable it(RST&CLK)\n");
- mt7621_pcie_assert_sysrst(RALINK_PCIE1_RST);
- rt_sysc_m32(RALINK_PCIE1_CLK_EN, 0, RALINK_CLKCFG1);
- pcie_link_status &= ~(1<<1);
- } else {
- pcie_link_status |= 1<<1;
- mask = mt7621_pci_reg_read(RALINK_PCI_PCIMSK_ADDR);
- mask |= (1<<21); // enable pcie1 interrupt
- mt7621_pci_reg_write(mask, RALINK_PCI_PCIMSK_ADDR);
- }
-
- if ((mt7621_pci_reg_read(RALINK_PCI_STATUS(2)) & 0x1) == 0) {
- printk("PCIE2 no card, disable it(RST&CLK)\n");
- mt7621_pcie_assert_sysrst(RALINK_PCIE2_RST);
- rt_sysc_m32(RALINK_PCIE2_CLK_EN, 0, RALINK_CLKCFG1);
- pcie_link_status &= ~(1<<2);
- } else {
- pcie_link_status |= 1<<2;
- mask = mt7621_pci_reg_read(RALINK_PCI_PCIMSK_ADDR);
- mask |= (1<<22); // enable pcie2 interrupt
- mt7621_pci_reg_write(mask, RALINK_PCI_PCIMSK_ADDR);
- }
+ for (i = 0; i < PCI_MAX_CONTROLLERS; i++)
+ mt7621_pci_enable_irqs(i);
if (pcie_link_status == 0)
return 0;
--
2.7.4
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
