Hi Alexandru,
Thanks for the review. Some questions inline.
Thanks,
Renato
On 03/01, Ardelean, Alexandru wrote:
On Thu, 2019-02-28 at 11:23 -0300, Renato Lui Geh wrote:
The patch-series is a bit big.
I guess that the intent is to move this out-of-staging, but various patches
are holding this in it's place.
For patch series above a certain size, you could get many re-spins
[V2,3,4... so on].
You could send some of the changes as individual patches, or group them in
series of 1,2 or 3 patches. That way, you "parallelize" patch sending, and
when you get reviews on each patch, you can re-spin them individually.
You'll find over time that certain patches get accepted on V1, others on V2
and some on V7 [ hopefully, there isn't any frustration at that point ].
On these subseries, should versioning follow this patchset (v5) or should
they start anew (v1), ignoring this series version?
Well, this is a technique I use to distribute some of my upstream-patch-
work, so that I can switch easier between internal-work & upstreaming-work.
Coming back to this patch-series.
My general input, is that the patches are fine over-all; some are just
cosmetics/noise/a-different-way-of-doing-things-for-this-driver, and those
usually can be left to preference [of the maintainer usually].
I do suggest to not hurry when re-spinning patches, and not change too much
the number of patches in a new series. That can complicate things
sometimes. But, if doing small patch-series or individual patches, you
won't have this problem too much.
Thanks
Alex
This series of patches contains the following:
- Adds user input for the 'gain' and 'filter' GPIO pins for the ad778x
family chips;
- Filter reading for the ad778x;
- Sets pattern macro values and mask for PATTERN status bits;
- Adds ID values for the ad7170, ad7171, ad7780 and ad7781 for ID
status bits checking;
- Moves regulator initialization to after GPIO init to maintain
consistency between probe and remove;
- Copyright edits, adding SPDX identifier and new copyright holder;
- Moves the ad7780 driver out of staging to the mainline;
- Adds device tree binding for the ad7780 driver.
Renato Lui Geh (9):
staging: iio: ad7780: add gain & filter gpio support
staging: iio: ad7780: add filter reading to ad778x
staging: iio: ad7780: set pattern values and masks directly
staging:iio:ad7780: add chip ID values and mask
staging: iio: ad7780: move regulator to after GPIO init
staging: iio: ad7780: add SPDX identifier
staging: iio: ad7780: add new copyright holder
staging: iio: ad7780: moving ad7780 out of staging
staging: iio: ad7780: add device tree binding
Changelog:
*v3
- SPDX and regulator init as patches
- Renamed filter to odr and ad778x_filter to ad778x_odr_avail
- Removed unnecessary regulator disabling
- Removed unnecessary AD_SD_CHANNEL macro
- Changed unsigned int to unsigned long long to avoid overflow
*v4
- Split gain & filter patch into two, with the new commit adding only
filter reading
- Changed pattern values to direct values, and added pattern mask
- Added ID values and mask
- Added new copyright holder
- Added device tree binding to the ad7780 driver
.../bindings/iio/adc/adi,ad7780.txt | 48 +++
drivers/iio/adc/Kconfig | 12 +
drivers/iio/adc/Makefile | 1 +
drivers/iio/adc/ad7780.c | 365 ++++++++++++++++++
drivers/staging/iio/adc/Kconfig | 13 -
drivers/staging/iio/adc/Makefile | 1 -
drivers/staging/iio/adc/ad7780.c | 277 -------------
7 files changed, 426 insertions(+), 291 deletions(-)
create mode 100644
Documentation/devicetree/bindings/iio/adc/adi,ad7780.txt
create mode 100644 drivers/iio/adc/ad7780.c
delete mode 100644 drivers/staging/iio/adc/ad7780.c
--
2.21.0
--
You received this message because you are subscribed to the Google Groups "Kernel
USP" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to kernel-usp+unsubscr...@googlegroups.com.
To post to this group, send email to kernel-...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/kernel-usp/72a54cd5f58aeb9507b95b7e33ca3d9a38c853e9.camel%40analog.com.
For more options, visit https://groups.google.com/d/optout.
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
