Hi Alex,
On 02/04/2020 19:34, Alex Riesen wrote:
> As there is nothing else (the consumers are supposed to do that) which
> enables the clock, do it in the driver.
>
> Signed-off-by: Alexander Riesen <alexander.rie...@cetitec.com>
> --
>
> v3: added
> ---
> drivers/media/i2c/adv748x/adv748x-dai.c | 14 +++++++++++++-
> 1 file changed, 13 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/media/i2c/adv748x/adv748x-dai.c
> b/drivers/media/i2c/adv748x/adv748x-dai.c
> index c9191f8f1ca8..185f78023e91 100644
> --- a/drivers/media/i2c/adv748x/adv748x-dai.c
> +++ b/drivers/media/i2c/adv748x/adv748x-dai.c
> @@ -117,11 +117,22 @@ static int adv748x_dai_set_fmt(struct snd_soc_dai *dai,
> unsigned int fmt)
>
> static int adv748x_dai_startup(struct snd_pcm_substream *sub, struct
> snd_soc_dai *dai)
> {
> + int ret;
> struct adv748x_state *state = state_of(dai);
>
> if (sub->stream != SNDRV_PCM_STREAM_CAPTURE)
> return -EINVAL;
this looks quite bunched up so :
Newline...
> - return set_audio_pads_state(state, 1);
> + ret = set_audio_pads_state(state, 1);
> + if (ret)
> + goto fail;
With no action required to cleanup here, I would just
return ret;
and remove the fail: label.
Newline...
> + ret = clk_prepare_enable(mclk_of(state));
> + if (ret)
> + goto fail_pwdn;
newline...
> + return 0;
newline...
Other than that:
Reviewed-by: Kieran Bingham <kieran.bingham+rene...@ideasonboard.com>
> +fail_pwdn:
> + set_audio_pads_state(state, 0);
> +fail:
> + return ret;
> }
>
> static int adv748x_dai_hw_params(struct snd_pcm_substream *sub,
> @@ -174,6 +185,7 @@ static void adv748x_dai_shutdown(struct snd_pcm_substream
> *sub, struct snd_soc_d
> {
> struct adv748x_state *state = state_of(dai);
>
> + clk_disable_unprepare(mclk_of(state));
> set_audio_pads_state(state, 0);
> }
>
>
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
