Hi Manoj , Lucent Cellpipe 20 Series supports Port-Forwarding. It is called as PAT. Telnet to the Lucent Cellpipe. You will get the command prompt. Type 'pat' and enter. u will get a 'pat' Command prompt. The following is the syntax to add a port-forwarding entry.
>pat> addpatin <pppoa|wanip> <port>/<udp|tcp> <serverip> after adding the entry , type home and enter type save and enter this will restart the router. Hope that helps. Riaz --- In [email protected], Manoj Menon <[EMAIL PROTECTED]> wrote: > > Hi Riazuddin, > > --- Riazuddin <[EMAIL PROTECTED]> wrote: > > > Dear Mr. Sean, > > > > Lucent Cellpipe supports Port-Forwarding. > > > Which model ? And how ? > > The commands that you have to telnet and type, is even > more cryptic that Cisco IOS. Could really use your > help here. > > And BTW, I believe Sean was talking about a very > specifc model. > > -Manoj.C > > > __________________________________________________ > Do You Yahoo!? > Tired of spam? Yahoo! Mail has the best spam protection around > http://mail.yahoo.com > ------------------------ Yahoo! Groups Sponsor --------------------~--> See what's inside the new Yahoo! Groups email. http://us.click.yahoo.com/2pRQfA/bOaOAA/yQLSAA/0XFolB/TM --------------------------------------------------------------------~-> Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dubailug/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
