Hi Tri Dat, I had a closer look at decoupled 2p2c in parallel. Two issues have to be solved:
1. Apparently, our CubeGridCreator doesn't create a parallel YaspGrid. This can be fixed easily. Until then, one can use the default DgfGridCreator for YaspGrid and parallel. 2. In the decoupled 2p2c model, information is not transported across the process boundaries. Since decoupled 2p and 2p2c share quite a bit of the same infrastructure and 2p is parallel, this also should be feasible in the close future. Concerning decoupled 2p, I also did not succeed to run MPFAL in 3d and parallel. The FV/TPFA works fine, also in the adaptive regime. This needs to be further investigated. Kind regards Bernd On Fri, 22 May 2015 10:59:24 +0200 Tri Dat NGO <trida...@gmail.com> wrote: >Hi Bernd, > >Thank you so much for your help. >Please let me know if you have any progress on the decouple 2p2c in >parallel. > >Concerning 2p decoupled adaptive + parallel simulations, your comments >lead me to run *test_3d2p* in *dumux/test/decoupled/2p* in parallel and I >obtained the following error message: > >###################################################### >No model type specified >Default to finite volume MPFA l-method model >Dune reported error: Dune::NotImplemented >[storeBoundaryInteractionVolume:../../../dumux/decoupled/2p/diffusion/fvmpfa/lmethod/fvmpfal3dinteractionvolumecontainer.hh:2031]: >Boundary shape not implemented >###################################################### > >It seems that there is a problem when storing the boundary interaction >volumes in the *mpfa-lmethod*. My test domain dimension is 10x10x10 [m x m >x m] with the grid 20x20x20, all boundaries have id 1. I haven't tested yet >decoupled 2p - 3d parallel + adaptive using *mpfa-omethod/tpfa method*. >Please let me know if you have any additional suggestions. > >Kind regards, >Tri Dat > >2015-05-21 12:40 GMT+02:00 Bernd Flemisch <be...@iws.uni-stuttgart.de>: > >> Hi Tri Dat, >> >> I just tried to run test_dec2p2c in parallel and it seems that at least >> the output is wrong. While the pvd-file contains pointers to correct >> parallel pvtu-file names, only sequential vtu-files are written. I will >> investigate this further. >> >> In any case, to run in parallel, you need to switch the LinearSolver to >> the AMGBackend in your problem file by adding >> >> #include <dumux/linear/amgbackend.hh> >> >> and adding/changing something like >> >> SET_TYPE_PROP(TestDecTwoPTwoCProblem, LinearSolver, >> Dumux::AMGBackend<TypeTag>); >> >> >> Decoupled 2p adaptive and parallel is possible as far as I know. However >> the 2p adaptive stuff only works with ALUGrid and that means that one has >> to use a 3d test case because 2d ALUGrid is not parallel. I will try to set >> up a corresponding case. >> >> I assume that decoupled 2p2c adaptive and parallel is a larger task. Since >> we would also like to have it, we can put it on our to-do list, but it is >> hard to estimate when we actually can do it. >> >> Kind regards >> Bernd >> >> >> >> On 05/21/2015 11:51 AM, Tri Dat NGO wrote: >> >> Dear DuMuX, >> >> I would like to know whether there is any test case of 2p2c decoupled >> model which works correctly in parallel mode? >> I tried to run the parallel simulations of all examples in >> /dumux_v2.6/test/decoupled/2p2c with mpirun but I obtained always the >> results of sequential simulations. >> >> Another question always on parallel simulation but concerning the >> adaptive grid refinement, can we implement the adaptive grid method with >> 2p/2p2c model in parallel mode? >> >> Thank you in advance for your reply. >> >> Kind regards, >> Tri Dat >> >> >> _______________________________________________ >> Dumux mailing >> listdu...@listserv.uni-stuttgart.dehttps://listserv.uni-stuttgart.de/mailman/listinfo/dumux >> >> >> >> -- >> _______________________________________________________________ >> >> Bernd Flemisch phone: +49 711 685 69162 >> IWS, Universität Stuttgart fax: +49 711 685 60430 >> Pfaffenwaldring 61 email: be...@iws.uni-stuttgart.de >> D-70569 Stuttgart url: www.hydrosys.uni-stuttgart.de >> _______________________________________________________________ >> >> >> _______________________________________________ >> Dumux mailing list >> Dumux@listserv.uni-stuttgart.de >> https://listserv.uni-stuttgart.de/mailman/listinfo/dumux >> >> _______________________________________________________________ Bernd Flemisch phone: +49 711 685 69162 IWS, Universitaet Stuttgart fax: +49 711 685 67020 Pfaffenwaldring 61 email: be...@iws.uni-stuttgart.de D-70569 Stuttgart url: www.hydrosys.uni-stuttgart.de _______________________________________________________________ _______________________________________________ Dumux mailing list Dumux@listserv.uni-stuttgart.de https://listserv.uni-stuttgart.de/mailman/listinfo/dumux
