Does anyone use the following configuration?
A newton (2100 or other) and a duodock?
Yes. Including both of the 2x00 series and the 1xx series MessagePads.
If so, how is it connected?
The hardware is a standard Mac Din8 (an 8 pin connector on both ends) cable connecting to the back of the duodock in the printer/modem port and the other end via the Newton Interconnect port adapter which then plugs into top of the MessagePad 2x00.
The software typically used on the Duo is called the Newton Connection Utility v1.0 and is available for downloading at no charge on http://www.unna.org/view.php?/apple/connection_utils/ForMac/ NewtonConnectionUtilities
On the MessagePad 2x00, the app is in ROM and is found in the Extras drawer. It is called Dock.
Could you please list hardware and software?
The Duo hardware is a standard Mac printer Din8 cable. The Duo software is called Newton Connection Utility or NCU
The MessagePad 2x00 hardware is the Newton Interconnect adapter. The MessagePad 2x00 software is a built-in package and is referred to as Dock.
- sir
---------- Duo/2400 List, The friendliest place on the Net! A listserv for users and fans of Mac subportables. FAQ at <http://www.themacintoshguy.com/lists/DuoListFAQ.shtml> Be sure to visit Mac2400! <http://www.sineware.com/mac2400>
To unsubscribe, E-mail to: <[EMAIL PROTECTED]> To switch to the DIGEST mode, E-mail to <[EMAIL PROTECTED]> Need help from a real person? Try. <[EMAIL PROTECTED]>
