If by not recognized you mean you get a red "x" over the battery icon
in the menu bar.
That means the charging circuit is gone, usually a $150-200 repair,
because you must replace the
power I/O board.
Good Luck
Brian
On Oct 8, 2006, at 1:38 PM, Trevor Davies wrote:
My 2400 suddenly decided not recognise the battery when on the
mains. Prior to this it was running fine and had about 40 min
battery life. It was left on standby with very low battery for 24
hrs immediately before the problem arise. I have tried a new
battery which gets recognised very briefly. I can't see anything
physically wrong with the connectors. Any ideas?
Trevor Davies
Mill Cottage, Eynsham Road, Cassington Mill, OX29 4DB
Telephone 01865 731570
0781 345 8397
_______________________________________________
DuoList mailing list
[email protected]
http://listserver.themacintoshguy.com/mailman/listinfo/duolist
Listmom is trying to clean out his closets! Vintage Mac and random
stuff:
http://search.ebay.com/_W0QQsassZmacguy1984
_______________________________________________
DuoList mailing list
[email protected]
http://listserver.themacintoshguy.com/mailman/listinfo/duolist
Listmom is trying to clean out his closets! Vintage Mac and random stuff:
http://search.ebay.com/_W0QQsassZmacguy1984
