Hi Folks, I need to say Thank You to Paul!!! Of course it was a setting on one of my definitions! Humility is humbling! TNX for the support!
Will NA2NA ----- Original Message ----- From: "William Liporace - NA2NA" <[EMAIL PROTECTED]> To: "DX4WIN POSTINGS" <Dx4win@mailman.qth.net> Sent: Friday, April 11, 2003 7:57 PM Subject: Re: [Dx4win] QSL Printing Directly to Cards > I guess there is still something that I am not expressing or that does not > work. I was told by one person to try print Labels | QSL Labels in Sequence: > This equals 0 > Paul suggested Labels Print QSL Labels | Print | Preview. This will show me > what is there is 154 cards out of all of my QSOs. When I look at one > specific card, I have 61 cards and only 1 is there. I have another that > shows 1 and none print. > So what ever is going on.. it is not right. At this point, I am getting real > frustrated with DX4Win. > > TNX for any suggestions!! Will NA2NA > > ----- Original Message ----- > From: "Paul van der Eijk" <[EMAIL PROTECTED]> > To: "William Liporace - NA2NA" <[EMAIL PROTECTED]>; "DX4WIN POSTINGS" > <Dx4win@mailman.qth.net> > Sent: Thursday, April 10, 2003 10:54 PM > Subject: Re: [Dx4win] QSL Printing Directly to Cards > > > > Will, > > > > When you do an EDIT | Preview, you get enough to see what is going on > > using dummy data. > > > > When you PRINT, you can also select a preview, which will use all > available > > real data to show what will happen. > > > > Does that explain what you observe? > > > > Paul > > > > At 10:10 PM 4/10/03 -0400, William Liporace - NA2NA wrote: > > >Hi Folks, > > >I have not done much QSLing in a long time. I am home for a few days and > > >wanted to get caught back up. I have used the same QSL Cards and printer > for > > >a long time. I have the same paper definition for the QSL card. When I go > > >into Labels | Print QSL Labels | QSL Method | (Pick a method). I have one > > >that has 61 QSOs listed, but it only prints one card. The one that has 1 > > >does not print the card. I did not want to do my buro list (way too many, > > >but I will print them this weekend..maybe) yet. > > >When I go to Edit | Preview and print, the demo two cards work just fine. > > >The menu on the Top says # of QSOs, but I do not seem to get all of the > > >cards to show up in the print preview..... > > >What am I doing wrong?? > > > > > >TNX Will NA2NA > > > > > >_______________________________________________ > > >Dx4win mailing list > > >Dx4win@mailman.qth.net > > >http://mailman.qth.net/mailman/listinfo/dx4win > > > > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > > Paul van der Eijk (KK4HD) > > [EMAIL PROTECTED] > > http://www.dx4win.com > > > > _______________________________________________ > > Dx4win mailing list > > Dx4win@mailman.qth.net > > http://mailman.qth.net/mailman/listinfo/dx4win > > _______________________________________________ > Dx4win mailing list > Dx4win@mailman.qth.net > http://mailman.qth.net/mailman/listinfo/dx4win