On 4/19/05, John Paul Keon <[EMAIL PROTECTED]> wrote: > I contacted AD1C and he advised to uninstall 6.03 and > reinstall. > > I did that. > > Now I get a new message: > "ERROR: Port Driver Not Found: > Check Appendix Files for the correct driver."
Have you rebooted since the reinstall? That's necessary for the driver to be loaded. If you have rebooted, the driver is supposed to be in the "drivers" subdirectory of the installation tree - try copying the files from "C:\Program Files\dx4w603\drivers\*.sys" to c:\windows\system32\drivers\ and rebooting. -Rick From [EMAIL PROTECTED] Tue Apr 19 16:18:25 2005 From: [EMAIL PROTECTED] (John Paul Keon) Date: Tue Apr 19 16:34:03 2005 Subject: [Dx4win] Error explained References: <[EMAIL PROTECTED]> Message-ID: <[EMAIL PROTECTED]> I am using win98se Yes, I did a reboot after the reinstall. It still would not open. It still gives the same error message. I am looking at the fixes and will check those. I ran Norton Utilities after the problem arose, and even did a complete check. The problem is still there. I am looking at the files that might be missing now. John Paul, Raleigh, NC [AB4PP]//NNN?UTV] "Sir Scribemeister" of the Knightlites http://www.knightlites.org "May you always have calm winds and following seas." "We all take different paths in life, but no matter where we go, we take a little of each other everywhere." ----- Original Message ----- From: "Wayne" <[EMAIL PROTECTED]> To: "John Paul Keon" <[EMAIL PROTECTED]> Sent: Tuesday, April 19, 2005 2:07 PM Subject: Re: [Dx4win] Error explained Check to see vichwll.sys is loaded into the windows drivers subdirectory. Which OS are you using? Win9X , WinXP? If Win XP do you have SP1 or SP2? Are you using a firewall, windows or ZoneAlarm or the like? 73, Wayne At 12:59 PM 4/19/2005 -0400, you wrote: >OK, >I just read my own message and it was vague. > >I was naving problems getting the Telnet to work on the packet >window and got the first message from that when I tried to go >on there and see the spots. > >"Excpetion Occurred: List Index out of bounds (0)." > >So, then when I uninstalled and reinstalled my DX4WIN 6.03 >I have not been able to open the program and get it to run at all. >The message: >"Port Driver not found. >Check Appendix Files for the correct driver." > >And that is where I am at now. > >I did save my SAVE log and that is intact. I can copy it to >the log when I can get it to run. But, for right now, I am stuck. > >Any help would be appreciated. > > >John Paul, Raleigh, NC [AB4PP]//NNN?UTV] >"Sir Scribemeister" of the Knightlites >http://www.knightlites.org >"May you always have calm winds and following seas." >"We all take different paths in life, but no matter where >we go, we take a little of each other everywhere." > >_______________________________________________ >Dx4win mailing list >Dx4win@mailman.qth.net >http://mailman.qth.net/mailman/listinfo/dx4win