I have not tried it but I was just wondering. Is there a difference if you have ADD REAL TIME or ADD OFF LINE selected under the QSO sub menu? I have not tried it and am just guessing, but if you went from ADD REAL TIME to ADD OFF LINE would it no longer update the QSO window?
Roger Borowski wrote: > Possibly the QSO window updating could be programmed to stop updating when a > radio/rig is not "started". That should be an easy solution...but I'm not a > programmer. I base this on seeing this "switch" for the QSO window updating > that would seem to be an answer to this request that would work > automatically depending if the radio is started or not, as if the update is > stopped with a radio started, the user would have to remember to manually > change the band and mode when logging, which could make for logging errors > if set not to update regardless. > > I wonder if Ver. 7 allows for separate COM ports dedicated to CW Keying as > well as PSK31 PTT? This is something that has been screwed up since Ver. 6 > and I haven't heard if it's been corrected in Ver. 7 as I've repeatedly > asked for this for a couple of years now. > I've been forced to revert back to using Ver. 5.02 because of this and never > could conveniently use Ver. 6.xx, which required going into Preferences and > changing the Control | Interface COM Port and DTR Line from (in my case) COM > 3 and CW Keying to COM 5 and PSK PTT control, with every switch between CW > and PSK modes. In Ver. 5.xx the PSK window had a separate selection for the > PTT COM Port. Can someone tell me if this is fixed in Ver. 7? I also wonder > if VER. 7 still has the same RTTY capabilities as the previous versions, to > use a TNC with the RTTY window in addition to the sound card RTTY system? I > certainly hope that hasn't been changed, but have not seen anything > concerning the items I am most interested in. Thanks for any answers to my > questions. > 73, -=Rog-K9RB=- > > ----- Original Message ----- > From: "Isidro Acosta Hern?ndez" <[EMAIL PROTECTED]> > To: <Dx4win@mailman.qth.net> > Sent: Monday, June 06, 2005 11:26 PM > Subject: [Dx4win] Auto update QSO window from spots > > > Hello. Is there a way to avoid the QSO window being updated when receiving > spots? If no, there would be a nice feature to be able to enable/disable > the auto updating... > > Best greetings... > > 73 de Isidro, EA8NQ > E-mail: [EMAIL PROTECTED] > > --------------------------------------- > Visit the EA8NQ's DX Page (in Spanish): > http://www.qsl.net/ea8nq/ > --------------------------------------- > _______________________________________________ > Dx4win mailing list > Dx4win@mailman.qth.net > http://mailman.qth.net/mailman/listinfo/dx4win > > _______________________________________________ > Dx4win mailing list > Dx4win@mailman.qth.net > http://mailman.qth.net/mailman/listinfo/dx4win > > -- __________________________________________________________________________ Alan Zack Amateur Radio Station K7ACZ Las Vegas, Nevada, USA Quality Engineer, The Boeing Company, Retired Aviation Chief Warrant Officer, U.S. Coast Guard, Retired U.S. Coast Guard, Always Ready, Always There Every hour, Every day, Around the Clock and Around the World SEMPER PARATUS http://www.gocoastguard.com DEPARTMENT OF HOMELAND SECURITY
