I recently changed to a flat panel monitor and it has a slightly lower resolution than the 19 inch CRT I was using (1280 versus something like 1600 horizontal). As expected when I started DX4WIN, I had to rearrange the various windows to my liking. However, one was off the screen and I couldn't therefore drag it into place. I had the Alt-K/CW input screen on the lower right side and I suspect that it is somewhere off the screen in that direction. Anyway, the usual trick is to delete the associate ini file (as I have done many times with Writelog) and reconfigure. It looked to me like the DX4WIN.CFG file played this role so deleted it and found that I could do the screen manipulations OK, the log was messed up. I have two groups of QSOs, one with my old callsign and the other with my current one. All the group 1 QSOs (i.e. all recent ones) were no longer showing and the Filter selection and edit group names pull downs were greyed out such that I couldn't do anything to work with the groups to get the log to show right. Looking for suggestions as to how to get the Alt-K window back or any other alternate suggestions on why the deletion of the DX4WIN.CFG file messed things up so much.
Thanks & 73 Stan, N3HS