Stan, I guess you have the option: File | Preferences | Screen | Leave all windows in original position checked. Disable this option, and restart DX4WIN. This should bring back all windows within the screen boundaries.
-- Paul At 12:48 PM 3/30/2005, Stan Staten wrote: >I recently changed to a flat panel monitor and it has a slightly lower >resolution than the 19 inch CRT I was using (1280 versus something like >1600 horizontal). As expected when I started DX4WIN, I had to rearrange >the various windows to my liking. However, one was off the screen and I >couldn't therefore drag it into place. I had the Alt-K/CW input screen >on the lower right side and I suspect that it is somewhere off the >screen in that direction. Anyway, the usual trick is to delete the >associate ini file (as I have done many times with Writelog) and >reconfigure. It looked to me like the DX4WIN.CFG file played this role >so deleted it and found that I could do the screen manipulations OK, the >log was messed up. I have two groups of QSOs, one with my old callsign >and the other with my current one. All the group 1 QSOs (i.e. all >recent ones) were no longer showing and the Filter selection and edit >group names pull downs were greyed out such that I couldn't do anything >to work with the groups to get the log to show right. Looking for >suggestions as to how to get the Alt-K window back or any other >alternate suggestions on why the deletion of the DX4WIN.CFG file messed >things up so much. > >Thanks & 73 >Stan, N3HS > > >_______________________________________________ >Dx4win mailing list >Dx4win@mailman.qth.net >http://mailman.qth.net/mailman/listinfo/dx4win ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Paul van der Eijk (KK4HD) [EMAIL PROTECTED] http://www.dx4win.com
