MMTTY works fine stand alone and with Writelog. I have not been
successful in getting it to run in the MMTTY window in DX4Win.
Program opens fine but no receive or transmit and shortly after
opening the Task Manager reports the program to be not responding.
Tried to send a attachment with RTTY preference page but reflector
would not accept it.
--
Tnx es 73
Dick W7ZR
www.w7zr.com
From [EMAIL PROTECTED] Fri Feb 3 13:44:24 2006
From: [EMAIL PROTECTED] (Juha Rantanen)
Date: Fri Feb 3 13:52:32 2006
Subject: [Dx4win] Importing state info from N1MM?
Message-ID: <[EMAIL PROTECTED]>
Hi,
In the recent CQ160m CW contest I used N1MM logger and now I need to
import the file to Dx4win. Only problem is that I can't get Dx4win to
import US State information from ADIF file generated by latest version
of N1MM. What do I have to replace in ADIF file and with what? Below you
can find two log rows from last weekend:
<CALL:5>KC1XX <QSO_DATE:8>20060128 <TIME_ON:6>063303 <SECTION:2>NH
<BAND:4>160M <CONTEST_ID:7>CQ160CW <FREQ:7>1.82120 <MODE:2>CW
<RST_RCVD:3>599 <RST_SENT:3>599 <OPERATOR:5>OH6XX <CQZ:1>5 <STX:3>370
<EXCHANGE1:2>NH <POINTS:2>10 <RADIO_NR:1>1 <APP_N1MM_CONTACTTYPE:0>
<APP_N1MM_RUN1RUN2:1>1 <EOR>
<CALL:4>NQ4I <QSO_DATE:8>20060128 <TIME_ON:6>063419 <SECTION:2>GA
<BAND:4>160M <CONTEST_ID:7>CQ160CW <FREQ:7>1.82170 <MODE:2>CW
<RST_RCVD:3>599 <RST_SENT:3>599 <OPERATOR:5>OH6XX <CQZ:1>5 <STX:3>372
<EXCHANGE1:2>GA <POINTS:2>10 <RADIO_NR:1>1 <APP_N1MM_CONTACTTYPE:0>
<APP_N1MM_RUN1RUN2:1>1 <EOR>
These were created with N1MM V6.1.10.
Juha OH6XX
From [EMAIL PROTECTED] Fri Feb 3 14:04:31 2006
From: [EMAIL PROTECTED] (Juha Rantanen)
Date: Fri Feb 3 14:12:42 2006
Subject: [Dx4win] Importing state info from N1MM?
In-Reply-To: <[EMAIL PROTECTED]>
References: <[EMAIL PROTECTED]>
<[EMAIL PROTECTED]>
Message-ID: <[EMAIL PROTECTED]>
Dick,
Thanks, that did the trick. I knew it was something easy.
73,
Juha OH6XX
Richard Zalewski wrote:
> My understanding is you need to replace Section:2 with State:2
>
> Dick W7ZR
>
> On 2/3/06, Juha Rantanen <[EMAIL PROTECTED]> wrote:
>> Hi,
>>
>> In the recent CQ160m CW contest I used N1MM logger and now I need to
>> import the file to Dx4win. Only problem is that I can't get Dx4win to
>> import US State information from ADIF file generated by latest version
>> of N1MM. What do I have to replace in ADIF file and with what? Below you
>> can find two log rows from last weekend:
>>
>> <CALL:5>KC1XX <QSO_DATE:8>20060128 <TIME_ON:6>063303 <SECTION:2>NH
>> <BAND:4>160M <CONTEST_ID:7>CQ160CW <FREQ:7>1.82120 <MODE:2>CW
>> <RST_RCVD:3>599 <RST_SENT:3>599 <OPERATOR:5>OH6XX <CQZ:1>5 <STX:3>370
>> <EXCHANGE1:2>NH <POINTS:2>10 <RADIO_NR:1>1 <APP_N1MM_CONTACTTYPE:0>
>> <APP_N1MM_RUN1RUN2:1>1 <EOR>
>> <CALL:4>NQ4I <QSO_DATE:8>20060128 <TIME_ON:6>063419 <SECTION:2>GA
>> <BAND:4>160M <CONTEST_ID:7>CQ160CW <FREQ:7>1.82170 <MODE:2>CW
>> <RST_RCVD:3>599 <RST_SENT:3>599 <OPERATOR:5>OH6XX <CQZ:1>5 <STX:3>372
>> <EXCHANGE1:2>GA <POINTS:2>10 <RADIO_NR:1>1 <APP_N1MM_CONTACTTYPE:0>
>> <APP_N1MM_RUN1RUN2:1>1 <EOR>
>>
>> These were created with N1MM V6.1.10.
>>
>> Juha OH6XX
>> _______________________________________________
>> Dx4win mailing list
>> Dx4win@mailman.qth.net
>> http://mailman.qth.net/mailman/listinfo/dx4win
>>
>
>
> --
> Tnx es 73
> Dick W7ZR
> www.w7zr.com
>
>
