I have never done anything in particular to set my upload flag to LOTW. Some are set, some are not. Why? Howe do I set them all? Also, the ones that were loaded, do not have the Upload date set...
Thanks, Tim, WA5YOM, Ardmore, OK. From [EMAIL PROTECTED] Sun Jun 4 10:57:37 2006 From: [EMAIL PROTECTED] (WC7N) Date: Sun Jun 4 11:03:55 2006 Subject: [Dx4win] QSL's References: <[EMAIL PROTECTED]> Message-ID: <[EMAIL PROTECTED]> Robert I have unchecked that block but every time I go back to print a QSL label I have to uncheck it again. Has never been that way before. Rod WC7N ----- Original Message ----- From: "Duane A Calvin" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Cc: <dx4win@mailman.qth.net> Sent: Saturday, June 03, 2006 8:36 PM Subject: Re: [Dx4win] QSL's > Robert, > On the "Print QSL Labels" window, uncheck the box next to "Print > Method Labels." This causes a method label (or QSL) to be printed at the > start of each new subdivision of the QSL label/card printout. > > 73, Duane > > > On Fri, 2 Jun 2006 17:44:24 -0400 "ROBERT HABERMEHL" <[EMAIL PROTECTED]> > writes: >> I have been doing my QSL's one at a time, over the years with on >> problem. Now I get one QSL card saying >> >> METHOD=DIRECT >> >> Then the QSL will print correctly, on the next card >> >> How do I fix it so I do not print the first Method=Direct??? >> >> Robert G Habermehl >> W2KKZ >> Trustee W2DXA >> VE ARRL >> _______________________________________________ >> Dx4win mailing list >> Dx4win@mailman.qth.net >> http://mailman.qth.net/mailman/listinfo/dx4win >> >> > > > -------------------------------------- > Duane Calvin, AC5AA > Austin, Texas > > http://home.austin.rr.com/ac5aa > _______________________________________________ > Dx4win mailing list > Dx4win@mailman.qth.net > http://mailman.qth.net/mailman/listinfo/dx4win > From [EMAIL PROTECTED] Sun Jun 4 10:59:25 2006 From: [EMAIL PROTECTED] (WC7N) Date: Sun Jun 4 11:05:44 2006 Subject: [Dx4win] vichw11.sys Again. References: <[EMAIL PROTECTED]><[EMAIL PROTECTED]> <[EMAIL PROTECTED]> Message-ID: <[EMAIL PROTECTED]> Anders did you install vichw11.sys ? It is necessary , you know. Rod WC7N ----- Original Message ----- From: "Anders Janis SM4RNA" <[EMAIL PROTECTED]> To: <dx4win@mailman.qth.net> Sent: Sunday, June 04, 2006 12:56 AM Subject: Re: [Dx4win] vichw11.sys Again. >I have not resolved this and the only mail I have received directley is >from OH2BU that have the same problem. > > Getting desperate. > > Anyone have a slightest clue? > > /Anders > > ----- Original Message ----- > From: "Anders Janis SM4RNA" <[EMAIL PROTECTED]> > To: <dx4win@mailman.qth.net> > Sent: Friday, June 02, 2006 5:39 PM > Subject: [Dx4win] vichw11.sys > > >>> Hi! >>> >>> .Have just installed Win XP Pro x64 and DX4Win 7.02.15. When I try to >>> lanch DX4Win I get the following error message. >>> >>> Error: >>> >>> Please copy the driver file: C:\Program Files >>> (x86)\dx4w702\DRIVERS\vichw11.sys >>> To: C:\WINDOWS\system32\Drivers\vichw11.sys >>> The Appendix File has more information about this. >>> >>> I have done this and still the same happens. I have scanned the whole >>> harddrive for Appendix and have not found an similar file. >>> >>> What to do? >>> >>> de Anders SM4RNA >> >> _______________________________________________ >> Dx4win mailing list >> Dx4win@mailman.qth.net >> http://mailman.qth.net/mailman/listinfo/dx4win > > _______________________________________________ > Dx4win mailing list > Dx4win@mailman.qth.net > http://mailman.qth.net/mailman/listinfo/dx4win > From [EMAIL PROTECTED] Sun Jun 4 11:00:30 2006 From: [EMAIL PROTECTED] (Paul van der Eijk) Date: Sun Jun 4 11:06:51 2006 Subject: [Dx4win] vichw11.sys Again. In-Reply-To: <[EMAIL PROTECTED]> References: <[EMAIL PROTECTED]> <[EMAIL PROTECTED]> <[EMAIL PROTECTED]> Message-ID: <[EMAIL PROTECTED]> Anders, 1. Did you copy the file manually as suggested in the on-line help? (Open dx4win.chm to access the on-line help if DX4WIN will not start) 2. Have you tried to run DX4WIN with administrative privileges? I do not have WINXP/64, but at work we have XP64/Server and I did not have these difficulties. --Paul At 03:56 AM 6/4/2006, you wrote: >I have not resolved this and the only mail I have received directley is from >OH2BU that have the same problem. > >Getting desperate. > >Anyone have a slightest clue? > >/Anders > >----- Original Message ----- From: "Anders Janis SM4RNA" <[EMAIL PROTECTED]> >To: <dx4win@mailman.qth.net> >Sent: Friday, June 02, 2006 5:39 PM >Subject: [Dx4win] vichw11.sys > > >>>Hi! >>> >>>.Have just installed Win XP Pro x64 and DX4Win 7.02.15. When I try to lanch >>>DX4Win I get the following error message. >>> >>>Error: >>> >>>Please copy the driver file: C:\Program Files >>>(x86)\dx4w702\DRIVERS\vichw11.sys >>>To: C:\WINDOWS\system32\Drivers\vichw11.sys >>>The Appendix File has more information about this. >>> >>>I have done this and still the same happens. I have scanned the whole >>>harddrive for Appendix and have not found an similar file. >>> >>>What to do? >>> >>>de Anders SM4RNA >> >>_______________________________________________ >>Dx4win mailing list >>Dx4win@mailman.qth.net >>http://mailman.qth.net/mailman/listinfo/dx4win > >_______________________________________________ >Dx4win mailing list >Dx4win@mailman.qth.net >http://mailman.qth.net/mailman/listinfo/dx4win ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Paul van der Eijk (KK4HD) [EMAIL PROTECTED] http://www.dx4win.com
