Hi Lee, Sorry to hear that from you. The problem I had was the one I described in earlier mails.
Dx4win seems memories on wish COMPORT it was installed the first time and has problems when it is moved to another port If you remember where it was connected the very first time then you probably can also correct the problem. The other possibility I just think of is that you have The BAD update from WINDOWS XP where many things went Wrong with port communications e.o. This was posted a few months ago here on this reflector, I will try to find It back in + 18000 dx4win mails I have here hi 73 Guy ON4AOI BAND DECODER and related stuff at http://www.on4aoi.be/banddecoder.htm DX4WIN soft and related stuff at http://www.on4aoi.be/dx4win.htm DX4WIN, WRITELOG, WF1B & RITTY CW & RTTY interfaces at http://www.on4aoi.be/keyer.htm ARSWIN link and related stuff at http://www.on4aoi.be/web7.htm DXTELNET soft and related stuff at http://www.on4aoi.be/dxt.htm -----Original Message----- From: Lee, N5PO [mailto:[EMAIL PROTECTED] Sent: Tuesday, October 24, 2006 2:43 PM To: ON4AOI Subject: RE: [Dx4win] Winkey Problems Not So....I have my Winkey hooked directly to a pci card..COM4 and it does not work. I also have COM1 and COM3. Does not work there either...I have used 2 different computers, same results.. Lee, N5PO --- ON4AOI <[EMAIL PROTECTED]> wrote: > Ok Paul, > That is the problem > You first have to disable the winkey > with the USB to serial converter CONNECTED > and normally WORKING in dx4win > > Next close dx4win normally, > (maybe you need to reboot also) > > unplug the USB to serial > attach to the pci serial card and then > restart DX4WIN and select where winkey > is attached now. > > It will work then > > > 73 Guy ON4AOI > > BAND DECODER and related stuff at > > http://www.on4aoi.be/banddecoder.htm > > DX4WIN soft and related stuff at > > http://www.on4aoi.be/dx4win.htm > > DX4WIN, WRITELOG, WF1B & RITTY CW & RTTY interfaces > at > > http://www.on4aoi.be/keyer.htm > > ARSWIN link and related stuff at > > http://www.on4aoi.be/web7.htm > > DXTELNET soft and related stuff at > > http://www.on4aoi.be/dxt.htm > > > -----Original Message----- > From: Paul Pescitelli [mailto:[EMAIL PROTECTED] > Sent: Monday, October 23, 2006 9:08 PM > To: ON4AOI > Subject: Re: [Dx4win] Winkey Problems > > Yes, I did have a USB to serial converter... > However, I took it out > this morning and replaced it with a new pci serial > card. I still have > the same problem. > > regards, > Paul > > On 10/23/06, ON4AOI <[EMAIL PROTECTED]> wrote: > > Yep Paul, > > You have probably unplugged or plugged in the > winkey > > via a USB to serial converter and then you get > this problem. > > Check if winkey is on com1 or has a good > connection > > > > you only can end DX4WIN with CTRL+ALT+DEL and then > stop the program 2 or 3 > > times > > > > > > > > 73 Guy ON4AOI > > > > BAND DECODER and related stuff at > > > > http://www.on4aoi.be/banddecoder.htm > > > > DX4WIN soft and related stuff at > > > > http://www.on4aoi.be/dx4win.htm > > > > DX4WIN, WRITELOG, WF1B & RITTY CW & RTTY > interfaces at > > > > http://www.on4aoi.be/keyer.htm > > > > ARSWIN link and related stuff at > > > > http://www.on4aoi.be/web7.htm > > > > DXTELNET soft and related stuff at > > > > http://www.on4aoi.be/dxt.htm > > > > > > -----Original Message----- > > From: > [EMAIL PROTECTED] > > > [mailto:[EMAIL PROTECTED] > On Behalf Of Paul > > Pescitelli > > Sent: Monday, October 23, 2006 3:15 PM > > To: dx4win@mailman.qth.net > > Subject: [Dx4win] Winkey Problems > > > > Running version 7.02.15 > > > > When I try to open the CW keying window I get an > error on the title > > bar of the window that says "could not open > winkey port 1". So then I > > try to close the window and then a modal dialog > box appears with > > > > An exception occured! > > ThreadError:Access is denied(5) > > > > With only an OK button, so I click it..the box > goes away, but you > > still cant do anything in the program. At this > point you can't even > > quit the program, so there is surely a bug or 3 in > there somewhere. > > > > I have tested the com port setup with Logger32, so > I know everything > > works from a hardware perspective. > > > > Any ideas ? > > -- > > 73 - Paul K4UJ / FS, KP2, KP4, PJ6, PJ7,VP2E, > ZF2UJ > > ============================== > > http://www.dx-is.com > > http://www.openhsmm.org > > ============================== > > _______________________________________________ > > Dx4win mailing list > > Dx4win@mailman.qth.net > > http://mailman.qth.net/mailman/listinfo/dx4win > > > > > > _______________________________________________ > Dx4win mailing list > Dx4win@mailman.qth.net > http://mailman.qth.net/mailman/listinfo/dx4win >
