I have experienced this also. In my portable computer hp omnibook Piii 850 with 256 ram running xp from time to time i had this. When i shut off dx4win and restart the problem was gone. In my desktop (Piv 3,2 with 1gb ram) never had this problem. This started after updating to 6.0. I have re-installed xp in my portable recently and i didn't noticed this agn. Kostas sv1dpi
----- Original Message ----- From: "saad mahaini" <[EMAIL PROTECTED]> To: "'Dennis Mowers'" <[EMAIL PROTECTED]>; "'KR4DA'" <[EMAIL PROTECTED]>; <dx4win@mailman.qth.net> Sent: Wednesday, October 25, 2006 12:50 AM Subject: RE: [Dx4win] 99 % CPU Usage > > This may not be the same that you are experiencing, but I figured I will > put > it out there. > > I have never seen this for all the years that I ran DX4WIN till recently. > I > have changed various things at the same time so that makes troubleshooting > a > lot harder. However, I only see this when one of the radios (PRO3) is > being > controlled. When I turn that on, everything works great for a little > while > and I can control the radio as supposed to but all of the sudden the CPU > goes to 99% and the program will come to a screeching halt. The only way > to > get out of this problem is usually shutting that radio control down and > things will be ok again. > > Its puzzling but I have not been able to crack that nut yet. Like I said, > I > used to run the same config before and never had a problem, till I made > various changes, new serial port board, new computer motherboard and > rebuild, DX4WIN upgrade, so I wonder what went wrong. > > 73 Saad N5FF > > > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] > On > Behalf Of Dennis Mowers > Sent: Tuesday, October 24, 2006 4:40 PM > To: KR4DA; dx4win@mailman.qth.net > Subject: Re: [Dx4win] 99 % CPU Usage > > I have looked at the processes running, and they are all zero, except > DX4WIN. I ran Spybot and Ad-Aware, and while they are running, DX4WIN > drops to 30-40%, but back to 99-100% when the other programs stop > executing. > > If I try running a couple of more Windows, and something that needs CPU > time, the computer is very slow. > > Right now I have MMTTY running, taking about 3%, and 96% is being taken > by DX4WIN. No other processes show higher than zero. > > DX4WIN must be doing something to hog all the CPU resources, the > "System Idle Process" shows zero. While on my other computer running > DX4WIN, it is 94-97%. > > KR4DA wrote: > >> That is a loaded question..... >> practically identical!!!!! >> Do a control alt del look at the processes running...I bet they are no >> where near identical.... >> you may have spy ware running, virus etc..... >> see what processes are running HIGH CPU usage then google that >> process see if it is a REAL PROCESS. >> Then go from there......... >> >> >> Dennis Mowers wrote: >> >>> I am running DX4WIN on two computers, practically identical with the >>> same amount of memory. >>> >>> One of them runs about 4-7% CPU usage with several windows open, >>> including WriteLog, along with DX4Win. >>> >>> The other computer goes to 99% CPU usage as soon as I open DX4Win. I >>> don't even have to open a log file to see the problem. Packet >>> windows were opening, but I turned them off, and that was not the >>> problem. >>> >>> Has anyone seen this problem? >>> >>> 73, Dennis-K5YA >>> >>> >> > > > > -- > No virus found in this outgoing message. > Checked by AVG Free Edition. > Version: 7.1.408 / Virus Database: 268.13.11/493 - Release Date: > 10/23/2006 > > _______________________________________________ > Dx4win mailing list > Dx4win@mailman.qth.net > http://mailman.qth.net/mailman/listinfo/dx4win > > > _______________________________________________ > Dx4win mailing list > Dx4win@mailman.qth.net > http://mailman.qth.net/mailman/listinfo/dx4win > >
