I am trying to get Dx4Win 7.02 to talk to my ProIII using a RigTalk interface. The interface works perfectly with Writelog and Commander 5.8.7. In DX4WIN it will not get the information from the radio regarding frequency/mode. I read a previous post about DX4WIN defaulting to 1200 baud and I went into my preferences, deselected the Default box, the baud rate was already set to 9600 which is what the ProIII is set to. The address is the default 6e.
Does anyone have a ProIII working with 7.02 using the Westmountain Radio RigTalk USB to CIV interface? Thanks, Rick W2RDS From [EMAIL PROTECTED] Tue Oct 31 00:06:08 2006 From: [EMAIL PROTECTED] (Jim Reisert AD1C) Date: Tue Oct 31 00:13:14 2006 Subject: [Dx4win] 756 ProIII and RigTalk USB interface In-Reply-To: <[EMAIL PROTECTED]> References: <[EMAIL PROTECTED]> Message-ID: <[EMAIL PROTECTED]> At 10:52 PM 10/30/2006, Rick Stoneking wrote: >I am trying to get Dx4Win 7.02 to talk to my ProIII using a RigTalk >interface. The interface works perfectly with Writelog and >Commander 5.8.7. In DX4WIN it will not get the information from the >radio regarding frequency/mode. I read a previous post about DX4WIN >defaulting to 1200 baud and I went into my preferences, deselected >the Default box, the baud rate was already set to 9600 which is what >the ProIII is set to. The address is the default 6e. > >Does anyone have a ProIII working with 7.02 using the Westmountain >Radio RigTalk USB to CIV interface? Two things to check: 1. In your DX4WIN radio preferences, try turning on the DTR and/or RTS boxes on. 2. Check your radio's TRANSCEIVE setting. It shoud be in the OTHERS menu. If it's NOT transceive, enable it. See if that makes a difference. 73 - Jim AD1C -- Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863 USA +978-251-9933, <[EMAIL PROTECTED]>, http://www.ad1c.us
