Correct Jim, For those that wanna try Edit the following in FT9000v3i file To use with FT-950 (with Textpad or similar editor)
ORIGINAL PART =============== [RC-Read S meter] CSTR=SM0; CDELAY=260 LEN=7 LOC=Other MODIFIED PART =============== [RC-Read S meter] CSTR=RM1; CDELAY=260 LEN=7 LOC=Other Guy ON4AOI -----Oorspronkelijk bericht----- Van: Jim Reisert AD1C [mailto:[EMAIL PROTECTED] Verzonden: zaterdag 24 mei 2008 0:12 Aan: Steve Schneider CC: [EMAIL PROTECTED] Onderwerp: Re: [Dx4win] Rig file for the Yaesu FT 950 I think Guy ON4AOI has been doing some work on the Yaesu radio files. He might be able to give you a better answer. 73 - Jim AD1C --- Steve Schneider <[EMAIL PROTECTED]> wrote: > Jim, > I tried the FT2000 rig control and that worked somewhat. I downloaded the > HRD rig control program and haven't tried it yet. 4800 baud rate is on the > program and the rig so that should be ok. I'll check the RTS and DTS boxes > and see what happens. Thanks! > 73 de Steve, K3IZ > > > ----- Original Message ---- > From: Jim Reisert AD1C <[EMAIL PROTECTED]> > To: Steve Schneider <[EMAIL PROTECTED]> > Sent: Friday, May 23, 2008 2:26:43 AM > Subject: Re: [Dx4win] Rig file for the Yaesu FT 950 > > You sure the baud rate is correct? I think think default for Yaesu is > 4800 baud, if DX4WIN doesn't match, you'll have to uncheck the default > box and put in 4800. Also play around with the RTS and DTR check boxes. > > Someone on the reflector says 950 mostly works, you can check the archives. > > Does the radio work with any other program? > > - Jim > > On 5/22/2008 11:45 AM, Steve Schneider wrote: > > Jim, > > I tried Version 7.04 and the FT9000-v31 file. It did not communicate. > No spots or anything. I also tried the FT 2000 and also nothing. I did try > the Yaesu FT 2000 rig control software and that works somewhat but after > about 10 minutes it looses commication between the radio and computer. Oh > well I'll keep trying and see what happens. Thanks for yur help on this. > > 73 de Steve, K3IZ > > > > > > ----- Original Message ---- > > From: Jim Reisert AD1C <[EMAIL PROTECTED]> > > To: Steve Schneider <[EMAIL PROTECTED]> > > Sent: Monday, May 19, 2008 4:10:46 PM > > Subject: Re: [Dx4win] Rig file for the Yaesu FT 950 > > > > Try 7.04 and the FT9000-v3i file. Let me know it works for you. > > > > 73 - Jim AD1C > > > > --- Steve Schneider <[EMAIL PROTECTED]> wrote: > > > >> DX4Winners, > >> Will there be an upgrade for a rig file for the Yaesu FT 950? I have > >> tried to use the setting for the FT 2000 but it it didn't work. Any help > >> is greatly appreciated. > >> Thanks de Steve, K3IZ -- Jim Reisert AD1C/Ø, <[EMAIL PROTECTED]>, http://www.ad1c.us No virus found in this incoming message. Checked by AVG. Version: 7.5.524 / Virus Database: 269.24.0/1461 - Release Date: 22/05/2008 16:44 No virus found in this outgoing message. Checked by AVG. Version: 7.5.524 / Virus Database: 269.24.1/1463 - Release Date: 23/05/2008 15:36 _______________________________________________ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win