Hi Vic, If all other commands work correct then it is a mistery ,
(All CAT commands are equal for FT9000 - FT2000 - FT950 (FT2000 and FT950 have also more (new) cmd Read out the S-meter The normal readcmd (SM0;) this is equal for FT-9000 - FT-950 and FT2000 The returned data from radio is also the same. SO Can some other users pse check if FT2000 - FT9000 Radio´s have a correct Panorama read out Guy ON4AOI BTW I have a new file for the FT-950 ready -----Oorspronkelijk bericht----- Van: Victor West [mailto:[EMAIL PROTECTED] Verzonden: zaterdag 24 mei 2008 12:48 Aan: ON4AOI CC: Dx4win@mailman.qth.net Onderwerp: Re: [Dx4win] Rig file for the Yaesu FT 950 Guy, This change made no difference. Jim, Again, for everybodys' information, I am using FT-9000 V31. Under preferences, baud rate is 4800, poll rate 5000, DTR and CTS both checked. The FT-950 is working except for the panorama function. Spots go to the radio properly when the spot is clicked on in the spot window (including split freq spots), and the progran reads the freq properly from the radio and puts it into the logbook. Sending spots also seems OK. The problem with the panorama function is the "S meter is "pegged at max" as the freq is scanned. When a signal is received. the display s meter reading "dips"according to the strength of the signal. de Vic, N5YY ex AE5DX ----- Original Message ----- From: "ON4AOI" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Cc: <dx4win@mailman.qth.net> Sent: Saturday, May 24, 2008 4:07 AM Subject: RE: [Dx4win] Rig file for the Yaesu FT 950 Correct Jim, For those that wanna try Edit the following in FT9000v3i file To use with FT-950 (with Textpad or similar editor) ORIGINAL PART =============== [RC-Read S meter] CSTR=SM0; CDELAY=260 LEN=7 LOC=Other MODIFIED PART =============== [RC-Read S meter] CSTR=RM1; CDELAY=260 LEN=7 LOC=Other Guy ON4AOI -----Oorspronkelijk bericht----- Van: Jim Reisert AD1C [mailto:[EMAIL PROTECTED] Verzonden: zaterdag 24 mei 2008 0:12 Aan: Steve Schneider CC: [EMAIL PROTECTED] Onderwerp: Re: [Dx4win] Rig file for the Yaesu FT 950 I think Guy ON4AOI has been doing some work on the Yaesu radio files. He might be able to give you a better answer. 73 - Jim AD1C --- Steve Schneider <[EMAIL PROTECTED]> wrote: > Jim, > I tried the FT2000 rig control and that worked somewhat. I downloaded the > HRD rig control program and haven't tried it yet. 4800 baud rate is on the > program and the rig so that should be ok. I'll check the RTS and DTS boxes > and see what happens. Thanks! > 73 de Steve, K3IZ > > > ----- Original Message ---- > From: Jim Reisert AD1C <[EMAIL PROTECTED]> > To: Steve Schneider <[EMAIL PROTECTED]> > Sent: Friday, May 23, 2008 2:26:43 AM > Subject: Re: [Dx4win] Rig file for the Yaesu FT 950 > > You sure the baud rate is correct? I think think default for Yaesu is > 4800 baud, if DX4WIN doesn't match, you'll have to uncheck the default > box and put in 4800. Also play around with the RTS and DTR check boxes. > > Someone on the reflector says 950 mostly works, you can check the archives. > > Does the radio work with any other program? > > - Jim > > On 5/22/2008 11:45 AM, Steve Schneider wrote: > > Jim, > > I tried Version 7.04 and the FT9000-v31 file. It did not communicate. > No spots or anything. I also tried the FT 2000 and also nothing. I did try > the Yaesu FT 2000 rig control software and that works somewhat but after > about 10 minutes it looses commication between the radio and computer. Oh > well I'll keep trying and see what happens. Thanks for yur help on this. > > 73 de Steve, K3IZ > > > > > > ----- Original Message ---- > > From: Jim Reisert AD1C <[EMAIL PROTECTED]> > > To: Steve Schneider <[EMAIL PROTECTED]> > > Sent: Monday, May 19, 2008 4:10:46 PM > > Subject: Re: [Dx4win] Rig file for the Yaesu FT 950 > > > > Try 7.04 and the FT9000-v3i file. Let me know it works for you. > > > > 73 - Jim AD1C > > > > --- Steve Schneider <[EMAIL PROTECTED]> wrote: > > > >> DX4Winners, > >> Will there be an upgrade for a rig file for the Yaesu FT 950? I have > >> tried to use the setting for the FT 2000 but it it didn't work. Any help > >> is greatly appreciated. > >> Thanks de Steve, K3IZ -- Jim Reisert AD1C/Ø, <[EMAIL PROTECTED]>, http://www.ad1c.us No virus found in this incoming message. Checked by AVG. Version: 7.5.524 / Virus Database: 269.24.0/1461 - Release Date: 22/05/2008 16:44 No virus found in this outgoing message. Checked by AVG. Version: 7.5.524 / Virus Database: 269.24.1/1463 - Release Date: 23/05/2008 15:36 _______________________________________________ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win No virus found in this incoming message. Checked by AVG. Version: 7.5.524 / Virus Database: 269.24.1/1463 - Release Date: 23/05/2008 15:36 No virus found in this outgoing message. Checked by AVG. Version: 7.5.524 / Virus Database: 269.24.1/1463 - Release Date: 23/05/2008 15:36 _______________________________________________ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win