What ever is in the QSL Managers database will over ride anything you type in the QSL Managers box. You need to open and modify this QSL Managers data base to add the correct QSL Mgr for the time frame of the contact once you are sure you have the correct info.
I had the same problem with H44MY so I changed the QSL MGR database. It was showing JA0IXW who used the call H44MY in 2004 and before. I hope I am doing this myself correctly. What I do is open the QSL Mgr database. Line 1 is always blank. There I enter H44MY and left click on the DATE column (TAB won't work). That causes H44MY to jump to a new line in alphabetical order just after H44MX (in my database anyway). Then in the next column I enter the effective date. In the case of H44MY I don't know the exact date, QRZ.COM just says from Nov 2008 onward use OM2SA, so I entered 11/01/2008. Then in the next column I entered OM2SA. Then I click on SAVE CHANGES AND EXIT. Now, any QSO with H44MY after 11/01/2008 will show OM2SA as the QSL MGR. Hope this works for you and hope that is the correct way of doing it. I am open to any suggestions or comments. GL & 73 Alan, K7ACZ ____________________________________________________ Alan Zack Amateur Radio Station K7ACZ Official USCG Auxiliary Comm Station Las Vegas, Nevada, USA Delta Rocket Quality Engineer, The Boeing Company, Retired Aviation Chief Warrant Officer, U.S. Coast Guard, Retired http://www.geocities.com/k7acz http://gocoastguard.com http://www.uscgradio.net http://www.comm-one.org ----------------------------------------------------------------------------------------------- ----- Original Message ----- From: <k...@cox.net> To: <Dx4win@mailman.qth.net> Sent: Saturday, September 19, 2009 1:56 PM Subject: [Dx4win] Problem with incorrect QSL manager info > Hi folks, > > I've run into a problem which I have no idea how to solve. Here's the > situation: > > I worked H44MY for a new entity on 30M. Entered all the info I had > and found out that the QSL manager callsign I put in the log was > wrong. Tried to fix it, but although the program will allow me to > enter another callsign in the QSL Manager box, when I save it nothing > happens to change the QSL manager callsign. I've tried it on two > machines, same problem. Same thing with deleting the QSO and then > entering off-line -- no joy. Shut off the computer, restarted, still > no joy. > > Ideas are MORE than welcome. I put the correct callsign (OM2SA) in > the notes area, and that's fine, but it really ought to go into the > QSL manager block, I would think. It would also make it a little > easier when I print labels for the cards..... > > Thanks, in advance, for your help and very 73, > > Karl, K1KO > Virginia Beach > ______________________________________________________________ > Dx4win mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Dx4win@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html