Lost a good feature in the v 8.02. In the old version V1.2, when use Real-time ( F9) or Off-time entry and SSB mode - rstS and rstR fields set to two digit (59) After entry in the field rstS two digits (e.g. 59) the cursor jumps to the next field rstR - this was in the old 1.2 version.
In the new one (8.02) when use Real-time ( F9) or Off-time entry and SSB mode rstS and rstR set also to two digit, BUT, after enter to the field rstS two digits (e.g. 59) the cursor stays here and I need to use TAB key to get in the next field as well as to get out of the rstR. And this is needed to repeat with every logged QSO. It slows down logging. This Tab key is not needed when CW, but when SSB. Is this the way for ever, or some settings can help to solve this ? Regards, Vigis, LY2CX ______________________________________________________________ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html