They don't. But I have worked two grids within a minute and had DX4Win reject the imported qso as dupe... probably because the QSO was within one minute and the resolution was to one minute.
Jim Reisert AD1C wrote: > On Sun, May 2, 2010 at 10:42 AM, Mel <ve...@videotron.ca> wrote: > >> Should also check grid... perhaps Paul could fix this. > > I'm not sure that "grid lines" count for VUCC. I think you have to be > INSIDE the grid. I've never heard of a rover operating from a line, > but I could be wrong (it wouldn't be the first time). > > 73 - Jim AD1C > >> Jim Reisert AD1C wrote: >>> This "duping" problem was fixed in 8.03 (from the release notes): >>> >>> Import/Export >>> >>> ยท Include state/county when checking for duplicate QSOs >>> >>> Can you please download/install 8.03 and see if the problem goes away? >>> You can install it into its own directory and it won't affect your >>> 8.01 setup. >>> >>> On Sun, May 2, 2010 at 9:22 AM, Art - W6KY <w...@yahoo.com> wrote: >>> >>>> Hi Jim, >>>> >>>> Logged as 2 QSO's. But with different reports representing the county's. >>>> K7ZX sitting on the county line... >>>> >>>> Using 8.01.. Did the County conversion program. Same results. >>>> >>>> Never had this happen before because in a contest when I am in a run >>>> mode I always work dupes. Contest software counts them as zero so >>>> it doesn't matter. Never dupe in S&P. N1MM software. >>>> >>>> This contest I only worked abt 100 Q's so I can easily remove the 6 >>>> or 8 county line dupes, but in a major contest... I really don't see the >>>> need to 'abort' an import due to dupes. Maybe a yes or no to proceed >>>> but not abort... >>>> >>>> 73, Art W6KY >>>> >>>> >>>> >>>> >>>> ----- Original Message ---- >>>> From: Jim Reisert AD1C <jjreis...@alum.mit.edu> >>>> To: Art - W6KY <w...@yahoo.com> >>>> Cc: DX4WIN Reflector <dx4win@mailman.qth.net> >>>> Sent: Sun, May 2, 2010 7:18:54 AM >>>> Subject: Re: [Dx4win] Import Abort - Duplicate QSO's >>>> >>>> Hi Art, >>>> >>>> How did you log the call and QTH? What version of DX4WIN are you using? >>>> >>>> If the QSOs are the same *except* for the County, I believe that >>>> DX4WIN 8.0x will NOT think they are duplicates. >>>> >>>> Have you tried running this program on your log to convert the contest >>>> abbreviations to real ADIF county names? >>>> >>>> http://software.ad1c.us/ADIF_County/ >>>> >>>> In fact, this program will create two QSOs out of the county line, and >>>> will add 1 second to the second QSO. >>>> >>>> 73 - Jim AD1C >>>> >>>> On Sun, May 2, 2010 at 1:31 AM, Art - W6KY <w...@yahoo.com> wrote: >>>> >>>>> When importing the 7 Area QSO Party ADIF log >>>>> the import aborts because of duplicate QSO's. >>>>> But, I worked several stations on the county lines. >>>>> Example: >>>>> K7ZX was ORLAN and ORLNN >>>>> Logged as 2 QSO's. >>>>> I have about 6 stations with 2 QSO's each on the >>>>> same band. County Lines... >>>>> What to do... >>>>> >>>>> Could change the calls in the ADIF file and then change >>>>> em back... Too much chance for errors... >>>>> >>>>> Thanks, Art W6KY > > ______________________________________________________________ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
