I would need to see the EXACT message. I've never seen such a message when I uploaded logs to eQSL. I would hope that the error message had more detail about what modes it thought were illegal.
73 - Jim AD1C On Mon, Aug 23, 2010 at 6:54 AM, Bud Governale, W3LL <w...@arrl.net> wrote: > The upload modes were a combination of RTTY and SSB. The version of DX4WIN > was 8.04. > > I had no trouble with the upload. It appeared to go well. > > I was just curious about the eQSL upload statement at the bottom of the > results page about the ADIF version spec non > compliance. > > 73, > > Bud W3LL > > ----- Original Message ----- > From: "Jim Reisert AD1C" <jjreis...@alum.mit.edu> > To: "Bud Governale, W3LL" <w...@arrl.net> > Cc: <dx4win@mailman.qth.net> > Sent: Sunday, August 22, 2010 9:49 PM > Subject: Re: [Dx4win] ADIF V2.19 > > > On 8/22/2010 4:40 PM, Bud Governale, W3LL wrote: > >> I saw the following statement when I uploaded QSO's to eQSL. >> Is DX4WIN in compliance with the spec? >> >> "Logger not compliant with ADIF V2.1.9 specs due to invalid mode(s) >> Logger identified as: DX4WIN" > > What was the mode that it complained about, and what version of DX4WIN > were you using? I have had NO trouble uploading to LoTW and eQSL using > 7.07 and 8.0x. Note that "PSK" is *not* an ADIF mode, you must choose > PSK31 (or PSK63 if it's available). This is a common mistake. -- Jim Reisert AD1C, <jjreis...@alum.mit.edu>, http://www.ad1c.us ______________________________________________________________ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html