Well Peter, It looks not that simple. I compared the cat commands from the original release and what is changed in the new release There are no new CI-V commands added Cmd 0F 00/01 is changed from split off/on to read split setting 00/01 = off/on.
Cmd 1C is completely changed to what DX4WIN probably can to read the split freq but the previous value-check for cmd 1C was never used in DX4WIN. They were used to check if you were in RX/TX or to read the antenna tuner. Think we have to wait after a solution from Paul Guy ON4AOI > -----Oorspronkelijk bericht----- > Van: dx4win-boun...@mailman.qth.net [mailto:dx4win- > boun...@mailman.qth.net] Namens Peter Bacon > Verzonden: zondag 26 december 2010 13:48 > Aan: dx4win@mailman.qth.net > Onderwerp: [Dx4win] Icom IC-7800 rig file > > I see that Icom has updated the firmware for the IC-7800 to ver 2.30. > The new firmware include the long awaited ability to read split > frequencies. > Has anyone figured out how to implement this in the DX4Win rig file/ > 73 Peter G3ZSS > > ______________________________________________________________ > Dx4win mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Dx4win@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
