Well, I blindly followed some advise. I think some good some not good. This was set wrong for 30M so I changed it: "Also, be sure that CW Frequency cutoff is accordingly for 30 meters and all other bands. This is located at FILE|PREFERENCE|QSO. "
Unfortunately I also did this: "Just go to FILE|DATABASES|RADIOS|YAESU FT1000MP|VALUES|MODEVALUES|CW|READ:2|WRITE:3|FILE|SAVE CHANGES AND EXIT." Now when I double click on a spot the log field is correct but the radio doesn't change. So I have broke the link for setting frequency on the rig. I did not right the values down before changing them (what was I thinking). There are 4 fields Read 2, 255 and Write 3,255 in the CW field. Now the odd part is, this is all I changed and now I no spots move the dial on the rig. I didn't mess with anything in SSB and yet double click a SSB spot and no change at the rig. Again, 8.04 FT1000MP. Thanks for help. AD6ZJ, Loren ______________________________________________________________ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
