Changing the CW cutoff is correct. You should have left the rig file alone. Just replace it with a back-up copy.
On 2011-01-16 11:59, Loren Hunt wrote: > Well, I blindly followed some advise. I think some good some not good. > > This was set wrong for 30M so I changed it: > "Also, be sure that CW Frequency cutoff is accordingly for 30 meters and > all > other bands. This is located at FILE|PREFERENCE|QSO. " > > Unfortunately I also did this: > "Just go to FILE|DATABASES|RADIOS|YAESU > FT1000MP|VALUES|MODEVALUES|CW|READ:2|WRITE:3|FILE|SAVE > CHANGES AND EXIT." > > Now when I double click on a spot the log field is correct but the radio > doesn't change. So I have broke the link for setting frequency on the rig. I > did not right the values down before changing them (what was I thinking). > There are 4 fields > Read 2, 255 and Write 3,255 in the CW field. Now the odd part is, this is all > I changed and now I no spots move the dial on the rig. I didn't mess with > anything in SSB and yet double click a SSB spot and no change at the rig. > > Again, > 8.04 > FT1000MP. > > Thanks for help. > AD6ZJ, Loren > > ______________________________________________________________ > Dx4win mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Dx4win@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html