Hi Jim and Joe, My luck lasted short time. Everything seemed to work FB after application of all suggested power modifications, but there it is again, some of the USB/RS232 ports/devices get again inhibited by Windows, though in much greater time intervals then before (sometimes all OK during 1 hour of operation, then suddenly SteppIR or antenna rotor stop responding .... :( ....
73, Radi F6GNZ >________________________________ > De : Jim Reisert AD1C <jjreis...@alum.mit.edu> >À : microHAM America - W4TV <supp...@microham.com> >Cc : "Radivoj Kar, F6GNZ" <f6...@yahoo.com> >Envoyé le : Vendredi 24 février 2012 21h45 >Objet : Re: Re : [Dx4win] Windows 7 > >Thanks, Joe. I hope this will help resolve Radi's problems. > >On Fri, Feb 24, 2012 at 12:35 PM, microHAM America - W4TV ><supp...@microham.com> wrote: >> >> >> I can't speak to DX4Win as I do not use it or any other USB to >> serial converters for support of SteppIR and rotators. As far as >> microHAM goes, FTDI have a serious bug in ftd2xx.dll that causes a >> lock up when the computer goes into sleep state or turns off power >> to the USB port. >> >> microHAM programmers have recommended uninstalling Router 8.0.7 >> and replacing it with the older Router 7.7.1 (uses a previous, >> stable version of ftd2xx.dll). The information is available from >> the microHAM list at: >> http://groups.yahoo.com/group/microHAM/message/12328 >> >> Until a new (stable) version of d2xx.dll is available, it is wise >> to disable all power controls in the computer and set Windows for >> "High performance". Details are also available on the microHAM >> list at: >> http://groups.yahoo.com/group/microHAM/message/12395 >> >> 73, >> >> ... Joe Subich, W4TV >> microHAM America, LLC. >> http://www.microHAM-USA.com >> http://groups.yahoo.com/group/microHAM >> >> supp...@microham.com >> >> This message, including any attachments, may contain proprietary, >> confidential or privileged information for the sole use of the specific >> individual(s) to whom it is addressed. You are hereby notified that any >> disclosure, copying, distribution, or use of this message is prohibited. If >> you have received this message in error, please immediately notify the >> sender by reply e-mail and delete it. >> >> >> >> >> >> On 2/24/2012 2:18 PM, Radivoj Kar, F6GNZ wrote: >>> >>> Hi Jim, >>> >>> Thank you VERY much for the fast response ! I had completely lost my >>> morale after many tries and multiple freezing of DX4WIN due to malfunction >>> or stop of SteppIR and/or rotor control (SteppIR controller was setting to a >>> spot or new band only once, for the first time and not reacting to any >>> further change).... >>> >>> Joe, >>> >>> Please help ! >>> 73 to both of you, Radi F6GNZ >>> >>> >>> P.S.: something strange also after install of two identical FTDI USB/RS232 >>> interfaces on two different com ports: their icons show different names, one >>> is called "FT232R USB UART" and another "USB Serial Converter", but both >>> show identical properties (please see attached file) >>> >>> >>> >>> >>> >>>> ________________________________ >>>> De : Jim Reisert AD1C<jjreis...@alum.mit.edu> >>>> À : "Radivoj Kar, F6GNZ"<f6...@yahoo.com> >>>> Cc : DX4WIN Refelector<dx4win@mailman.qth.net>; "Joe Subich, >>>> W4TV"<li...@microham-usa.com> >>>> Envoyé le : Vendredi 24 février 2012 19h51 >>>> Objet : Re: [Dx4win] Windows 7 >>>> >>>> On Fri, Feb 24, 2012 at 11:25 AM, Radivoj Kar, F6GNZ wrote: >>>> >>>>> Just found why my DX4WIN often freezes and/or stops controlling SteppIR >>>>> and rotor on my new Windows 7 32 bit Home Premium laptop: USB FTDI RS232 >>>>> devices (MicroHAM Keyer/USB Router, FTDI USB/RS232 converters for SteppIR >>>>> and rotor control just stop responding for unknown reason. I have to >>>>> unplug >>>>> and plug-in the related USB cable, then it re-starts working, except that >>>>> in >>>>> some cases I need to exit DX4WIN and re-start it again ! >>>> >>>> >>>> This sounds like a similar problem seen on the microHAM list. You >>>> have configure your USB ports NOT to power down. Joe W4TV (copied) >>>> might be able to give you more details. >>>> >>>> -- >>>> Jim Reisert AD1C,<jjreis...@alum.mit.edu>, http://www.ad1c.us >>>> >>>> >>>> >> > > > >-- >Jim Reisert AD1C, <jjreis...@alum.mit.edu>, http://www.ad1c.us > > > ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html