Several of you have said that LoTW will not accept a ADIF file and needs a tq8 file. In the HELP file it states that LoTW will accept a ADIF and CABRILLO file. I did not find any prompt about a tq8 file and figured it was not needed in v1.14.1. I checked my ADIF file and it has the calls to up load correct. The ADIF file is located in C:\LoTW as ks0m149.ADI. That is the file I selected for the TQSL to "sign and upload. It did not do that. I tried to attach the file to email and LoTW cannot find the attachment in the ADIF format. I have tried twice this morning to up load the file with no success. If this version needs a tq8 file how do I make one ? My CERT is active and my profile info is correct. I am at a loss as to what to do next. KS0M Dick
"Lord help me to be the person my dog thinks I am" Richard C. (Dick) White Fulton, MO. 65251 U.S.A. Amateur Radio Station KS0M -----Original Message----- From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Wayne M Sent: Sunday, June 02, 2013 9:59 PM To: dx4win@mailman.qth.net Subject: Re: [Dx4win] LoTW problem v 1.14.1 Hi Dick, I have no idea why TQSL did not automatically send the file but you can only upload a TQ8 file not an adi file to LOTW. When I updated my TQSL program I just started the new downloaded file and it removed the earlier version, kept all my certs, and was ready to go and it did work fine here. 73 Wayne WA1PMA On 6/2/2013 7:22 PM, Dick White wrote: > First time to try LoTW TQSL v. 1.14.1 I have tried two times to up > load a file to LoTW. I get the following message "Your message did not > appear to have a TrustedQSL file attached to it." DX4WIN is latest > 8.xxx version. Both mail show the LoTW file attached. > > > > Here is what I did. > > In DX4WIN made a ADIF file (ks0m149).ADI and saved it in my C:\LoTW file . > > > > > Opened TQSL - File - "Select file to sign and upload ADIF or CABRILLO file." > > Selected the ks0m149.ADI file in C:\LoTW > > The file (C:\lotw\ks0m149.ADI) will be signed and up loaded using Station > loc = Fulton Call=ks0m, DXCC= USA Is that correct - yes. > > > > I thought then the file was automatically up loaded. It apparently was > not sent. > > > > I then opened a e-mail addressed to LoTW and attached "ks0m149.ADI" > (in my C:\LoTW file) and sent to ARRL LoTW as usually done. > > Did this twice and both were rejected. > > What did I miss or doing wrong? > > > > DICK - KS0M > > > > "Lord help me to be the person my dog thinks I am" > > Richard C. (Dick) White > > Fulton, MO. 65251 U.S.A. > > Amateur Radio Station KS0M > > > > ______________________________________________________________ > DX4WIN mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:DX4WIN@mailman.qth.net > > This list hosted by: http://www.qsl.net Please help support this email > list: http://www.qsl.net/donate.html ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html