Thanks much Arne, that did it. I kept looking at VUCC in the report awards. Now I think I know what happened. When I upgraded with Win 10 and had changes in ports, I loaded an old INI without that and forgot to edit that. I knew something to do with no bands to choose in the award report was the issue.
Can be frustrating when you know you are missing something obvious! Dan KI6X -----Original Message----- From: Dan Violette [mailto:dank...@socal.rr.com] Sent: Wednesday, November 25, 2015 6:33 PM To: 'DX4WIN@mailman.qth.net' Subject: RE: [Dx4win] VUCC Report Blank Now I realize the VUCC field should be blank since I never submitted anything. Just not getting W/C results in my VUCC Report. Dan KI6X -----Original Message----- From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Dan Violette Sent: Wednesday, November 25, 2015 5:12 PM To: DX4WIN@mailman.qth.net Subject: [Dx4win] VUCC Report Blank I have done this every few months for a couple years now and cannot today after an hour trying. I am trying to get a VUCC report of my grids worked and confirmed. I then save as CSV and edit in Excel to have paper report. All VUCC reports are blank (some say "prefix" in the first column where I would suspect "grid") My VUCC field is blank for any QSO record (Searched VUCC Mixed field for C or S) I just can't figure out what is wrong and can't get C & W report for the grids. /Dan, KI6X ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
