If you use any of Microham's USB enabled units (CW keyers, TNC, rig controllers...) this functionality is built in. http://www.microham.com/
You can have two virtual serial ports (e.g. COM1, COM2) in your PC/Mac with a single CAT interface. Running DX4Win and e.g. fldigi or even HRD in parallel works fine. Björn SM7IUN 2016-08-11 1:43 GMT+02:00 John, K9EL <k...@comcast.net>: > If you download and install VSPE from Eterlogic, you can share one Com Port > with two different pieces of software, thus negating the need to turn off > radio control of DX4Win when using other software. I use VSPE for DX4Win > and Radio Control software on the same single com port. > > 73, > John K9EL > > -----Original Message----- > From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of N4QS, Dave > Perry > Sent: Wednesday, August 10, 2016 5:40 PM > To: 'Courtney Judd' <k...@k4wi.net>; 'ACG' <cont...@alabamacontestgroup.org> > Cc: 'SECC' <s...@contesting.com>; Dx4win@mailman.qth.net > Subject: Re: [Dx4win] JT65A > > Cort, > > I use WSJT-X for JT65. It is also available as a free download. I setup > both WSJT-X and DX4WIN to run off of the same com port. But I do not run > them at the same time. When I want to work JT65, I click on Radio in DX4WIN > and click on Stop Radio, but I keep DX4WIN open. This disconnects DX4WIN > from the radio and opens up the com port. > > I then open WSJT-X and it automatically connects to the radio. When I am > finished making a JT65 contact, the QSO is saved to the wsjt.log file. I > then import the log file into DX4WIN. Just go to File, Import/Export, make > sure ADIF is selected at the top, click on Import, go find the WSJT file in > your directory, double click on it, then when the window for Options for > Duplicates pops up, select Ignore Duplicate QSO. This will ensure that you > only import any new JT65 QSOs into your DX4WIN log. > > Since the signal reports from WSJT-X incorrectly go into the Notes for this > Call field, I then cut and paste to move the signal report information from > that field to the Notes for this QSO field. > > When I am done working JT65, I close WSJT-X -- which frees up the com port. > I then click on Radio in DX4WIN and Start Radio to connect the radio back to > DX4WIN. Again, not elegant but effective. BTW, it is fun to work weak > signal JT65 on 6m as well as the other HF bands. So you should give it a > try. > > It would be great if Paul would someday start enhancing DX4WIN again. I am > sure many of us would like to see an automatic interface between WSJT-X and > DX4WIN like there is for MMTTY. We also need DX4WIN to support JT9 as a > mode. I might also add that an automatic interface for Fldigi would be > great for the many other digital modes currently available. But Paul has > been strangely inactive and incommunicado for five or six years now. > > For the time being, this is a workaround that is cumbersome but pretty > foolproof. Good luck. > > 73, > > Dave, N4QS > > > -----Original Message----- > From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Courtney > Judd > Sent: Wednesday, August 10, 2016 3:14 PM > To: ACG > Cc: SECC; Dx4win@mailman.qth.net > Subject: [Dx4win] JT65A > > well, I have been noticing that a lot of good dx is being spotted on > jt65 up around 50276 or so. Don't know anything about this but thought maybe > it might be something worth while to look into. So, I down loaded WSJT and > have it installed but looks to be very confusing to be sure. So any help on > getting me started would be appreciated. I also down loaded the instructions > and I can tell this is going to take some time and effort to get it all > playing correctly. I use DX4WIN for my general logging so maybe I would have > to have both programs open at the same time? Thanks, Cort K4WI > ______________________________________________________________ > DX4WIN mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:DX4WIN@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > ______________________________________________________________ > DX4WIN mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:DX4WIN@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > ______________________________________________________________ > DX4WIN mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:DX4WIN@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
