ok, I use a 2000D hooked to my computer via a microKeyer 2 by microHAM.
I downloaded JT65-hf and it seemed to be much simpler. I have com port 3
for keying and rig control/freq etc selected as it is that way in the
microHAM router. BUT, it will key but no audio received or sent and no
freq showing. I have tried all combos of listed devices and no luck.
Somehow I knew that this was not going to be easy!! lol any help/ideas?
thanks Cort K4WI
Joe Subich, W4TV <mailto:li...@subich.com>
Thursday, August 11, 2016 10:32 AM
On 8/11/2016 10:40 AM, Björn Ekelund wrote:
> If you use any of Microham's USB enabled units (CW keyers, TNC, rig
> controllers...) this functionality is built in.
Only microHAM "Keyer" series interfaces (microkeyer, microkeyer II,
digikeyer, digikeyer II, CW Keyer or MK2R+). USB Interface II and
USB Interface III do not provide the CAT/2nd CAT capability as they
have no internal microprocessor.
73,
... Joe, W4TV
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html