GM: I had a similar but different import problem with 3 log entries created following a single QSO with NW4DX who provided three sections OSC, OKE and IDR. When N1MM+ logged that QSO (I used "OSC/OKE/IDR") as the exchange received, it created three log entires, one for each section, that were each separated by 2 sec. When I tried to import the log into DX4win (Ver 9.0.4.1176), the import stopped after the first log entry for “OSC” and gave an error report that the next log entry with NW4DX was a duplicate.
I suspect that this problem could be fixed by: (a) finding out what DX4Win requires as the necessary time separation so that two QSOs wth the same station will not be considered a duplicate and then edit the time stamp in the 2nd and 3rd of the above QSOs to be more than that minimum. or (b) have Paul amend DX4Win to accommodate the 2 sec spacing currently provided by N1MM+ Could Paul and / or Jim comment on the above. Thanks & 73 Doug Joyce, VE3MV > On 2018-Apr-29, at 10:19 PM, Tom W4NBS <w4...@bellsouth.net> wrote: > > Hi Mike, > > I had that option set to 60 seconds. I reset it to 2 seconds but got the same > error. > > 73, Tom, W4NBS > >> On Apr 29, 2018, at 20:55, Mike Cizek W0VTT <mgci...@gmail.com> wrote: >> >> Hello Tom, >> >> They this: >> >> File > Preferences > Import >> Change the Time window to match QSO in secs to just 1 or 2 seconds. >> >> -- >> 73, >> Mike Cizek WØVTT >> -----Original Message----- >> From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] >> On Behalf Of Tom W4NBS >> Sent: Sunday, April 29, 2018 20:51 >> To: dx4win@mailman.qth.net >> Subject: [Dx4win] Importing Logs from the FQP >> >> Tried to import my Florida QSO Party log from N1MM+ after using Jim's ADIF >> to DX4WIN utility. There is a problem importing county line contacts. I >> deleted my fcounty line contacts with NN1T/P and tried again to import my >> contest log. But then the program stopped when it got to my next county line >> QSO's with K4FCG. >> >> The times for the county lines are staggered a few seconds by N1MM+ but the >> error I'm getting says the QSO's are duplicates and stops the import >> process. >> >> Any ideas? >> >> Thanks! >> >> 73, Tom, W4NBS >> ______________________________________________________________ >> DX4WIN mailing list >> Home: http://mailman.qth.net/mailman/listinfo/dx4win >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:DX4WIN@mailman.qth.net >> Message delivered to mgci...@gmail.com >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> > > ______________________________________________________________ > DX4WIN mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:DX4WIN@mailman.qth.net > Message delivered to d_jo...@sympatico.ca > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net Message delivered to arch...@mail-archive.com This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
