Hi Tim
I had the same problem but i just use the IC-7600 and change the hex-adress
Regards 5Q2J, Joe
Den 12-04-2019 kl. 03:48 skrev Tim moore:
mine does show both the band and frequency. That is, if I'm adding a QSO
usinig "Add Real-Time". If i add "off-line", then it does NOT show
frequency automatically, I have to add it manually. But if I add a QSO
using "add Real-Time".....even if i'm just in the "add Real-Time"
mode....the computer/DX4WIN tracks both the frequency and the band (and the
mode too). I'd make sure I had my radio settings correct in preferences.
Pick the right rig....and have the right baud rate, comm port, poll rate,
DTR, DTS....etc. have them set right on BOTH ends...radio menu AND DX4WIN
settings.
K4TK
Tim Moore
PMP
On Thu, Apr 11, 2019 at 12:16 AM Mark Lunday <wd4...@outlook.com> wrote:
Only the band is showing in the QSO window. Is there a specific setting
that I need to check?
Mark Lunday, WD4ELG
Greensboro, NC FM06be
wd4...@arrl.net<mailto:wd4...@arrl.net>
http://wd4elg.blogspot.com
SKCC #16439 FISTS #17972 QRP ARCI #16497
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html