I'd get with someone who has a 7300 hooked up to DX4WIN (and the 7300 is a VERY popular radio, so there has to be LOTS of folks with that combination!) and compare configs. That said, does your radio really support that baud rate of 115200? Mine does NOT, It only goes up to 38400.. And again, my setup (which of course is different, because it's for a Yaesu FT DX 3000....but some things remain constant between most radios/comm ports/software logging apps) makes me wonder where you got some of the numbers/config.Where did you get that address of 94 hex? Does your poll rate (5000) match the poll rate in your radio menu? does your baud (115200) match on ALL THREE PLACES: radio menu, DX4WIN (we see that it is what that is set to) and also on the port on your laptop/computer? the key is EVERYTHING has to match....the settings in the radio menu....the settings in DX4WIN....and any settings on the port you are attached to on the computer/laptop. I'd check ALL three places...that things like baud rate, comm port, poll rate (only applies to the radio and DX4WIN....not the computer port), DTR, RTS....are all set to the SAME THING. For instance, my radio requires RTS to be set to HIGH. And mine requires NOTHING to be configured in the Address (where you have 94 Hex). Mine will only go to 38400.....and i have all three places set to 38400....the radio (via the menu option), the port on the laptop AND DX4WIN (in preference). All three places have to match...and can only be set to a rate that all three places support.
Forgive me if the above was to "obvious", but I've learned in trouble shooting over 40 years in the comm/IT business (and often...like this case...with the proverbial "3000 mile screwdriver" as we say in the business, because I'm not there to physically see your setup)...never assume anything, no matter how obvious it may or may not be to one person or the other! Again, get someone with a 7300 on the DX4WIN forum to share settings.........or check the things I mention. K4TK Tim Moore PMP On Thu, Apr 18, 2019 at 8:32 PM Mark Lunday <wd4...@outlook.com> wrote: > Tim and All > > > > Thanks. Sorry for the delayed response. > > > > My setup > > > > - Windows 10 64 bit, build 17763 > - VSPE 64 bit v0.938.4.846, with license for 64 bit > - Band Master 1.6, perfect synch with the 7300 > - WSJT-X 2.1.0, perfect synch with the 7300 > - FL Digi 4.1.01, perfect synch with the 7300 > - DXLab DX Commander 13.9.0, perfect synch with the 7300 > > > > DX4WIN 9.0.3.1160, not synching properly > > > > Capture1 shows the settings of the RADIO control in DX4WIN, which are the > same as the other programs that are connecting to the 7300: > 115,200/N/8/2/DTS=0/RTS=0 > > Capture2 shows the DX4WIN readout of the 7300 frequency. Note that the > secondary freq on 40 meters is correct (not in use when snip was taken). > The primary freq is haywire. > > Capture3 shows the DX4WIN readout of the 7300 frequency 5 second after > Capture2. Note that the secondary freq on 40 meters is correct (not in use > when snip was taken). The primary freq is haywire. > > > > > > The primary freq readout jumps back and forth between Capture2 and > Capture3. > > > > > > Mark Lunday, WD4ELG > > Greensboro, NC FM06be > > wd4...@arrl.net > > http://wd4elg.blogspot.com > > SKCC #16439 FISTS #17972 QRP ARCI #16497 > ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html