Lee, I just tried printing in Landscape mode with version 9.0.5 and it worked fine.
73, John K9EL -----Original Message----- From: dx4win-boun...@mailman.qth.net <dx4win-boun...@mailman.qth.net> On Behalf Of Lee Hallin Sent: Tuesday, June 18, 2019 1:48 PM To: Lee Hallin <hall...@lanecc.edu>; dx4win@mailman.qth.net Subject: [Dx4win] Printer "setup" problem in v9.05? Running on a PC running Windows 7 Pro. I don't know if this a general problem or one related to, perhaps, my printer (HP LJ 4000, parallel port connected). If I click WINDOWS -> Logbook Then Right click and click PRINT, then click Setup -> Landscape -> OK, then OK to actually print, I get the Logbook printed in "Portrait" instead of Landscape. I did it twice and the same behavior. For grins, I tried the same scenario using DX4WIN v9.01 on a different PC and a different printer and it printed in landscape. Don't know if it printed in Landscape because there is an issue with Setup on my HP LJ 4000? Or if it is related to the DX4WIN version 0.05 vs v9.01. Has anyone else seen this behavior? 73, Lee N7NU P.S. I upgraded from v9.04 to 9.05. DX4WIN restarted and I did the above scenario. I did NOT re-boot between the upgrade and running the above scenario. I'll reboot the PC tonight (when I get home) and see if that makes a difference. ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html