Hi Paul, I explain some more, All the programs are starting from WSJT-X (author K1JT) open source and Make different screens etc. BUT they all use the same HAMLIB rigfiles. For instance Yaesu FT-817ND - FT857 - FT897 are not working with these hamlib rigfiles After I complained so many times they finally will look into it deeper.
Check WSJT-X webpage also problems Release: WSJT-X 2.1.2 November 26, 2019 --------------------- WSJT-X 2.1.2 is a bug fix only release which fixes a major regression in the Hamlib package bundled with WSJT-X v2.1.1. This was for ICOM radio problems Release: WSJT-X 2.1.1 November 25, 2019 --------------------- WSJT-X 2.1.1 is a bug fix only release addressing regressions in the prior v2.1.0 release. All new radio's are not direct compatible with these third party hamlib files so can't work either This is my point Paul, when you have a rig that works with these hamlib files it's ok. But when it doesn't work and have to wait until they fix it or make a driver for it You have a problem, If Radio is not connected it can broadcast wrong data to DX4WIN. At this point it's your own mistake and you can correct b4 upload. But If it gets automatically uploaded on LoTW etc some could or will write this garbage is sended out by DX4WIN users .............. Guy -----Original Message----- From: Paul GRANGER <f6...@hotmail.com> Sent: Sunday, January 12, 2020 3:14 PM To: ON4AOI <on4...@skynet.be>; 'REFLECTOR dx4win' <dx4win@mailman.qth.net> Subject: Re: [Dx4win] Updates Hi Guy, Hi all I am not a specialist, but what is the problem when the FT8 (to make it short) programs get the frequency from the rig (therefore is correct), logs it into the adif file that everyboidy knows about, and DX4Win can "eat" that informlation automatically ? I see no room for mistakes... Well, I must admit I see no way how you can make a mistake using ythose programs and call o the wrong period, like several people have done. If yoy doucble-click on the station you want to call, there is no way you can do a mistake,... Anyway, this is another matter... Which other programs do not have the UDP broadcast ? Anyone here using them ? Or just the 3 you mentioned ? If people's logs have mistakes, whether they auto-upload or they upload later, they will both carry the error.... My 3 cents ! 73 Paul F6EXV Le 12/01/2020 à 14:13, ON4AOI a écrit : > Paul (F6EXV) and others HNY 2020, > Concerning your wish list I have some serious doubts if this be a full > idiot prove upgrade. > With the option "Enable logged contact ADIF broadcast" Paul, I should > write the program"DX4WIN" can listen to the UDP broadcasts when using > the latest versions of WSJT-X - MHSV - JTDX and log that contact. > - But what about WSJT or other programs without this option that users > may use ? > - These programs depend on Hamlib radiofiles and I know 100% sure > there are Rigs that are not supported or give errors all the time. > - In this case you have to disable your rig and use the program like > it is except for fox-hunt it will work ok, but when you change bands > and forget to change to the correct band your log will be incorrect. > That's why I have been always against auto upload to LoTW-eQSL-Clublog > > "IF" Auto upload to LoTW- eQSL - Clublog would be a fact "THEN" it > will create so much garbage and keeping those servers busy all the > time like It is already with eQSL. > Daily I get wrong eQSL's in my inbox, most of the time its wrong band > or mode.... > > My point is that grabbing broadcasts from the UDP server and log it > would be a nice feature but Never auto upload like some other programs > do and create massive garbage. > > Manually creating LoTW etc uploads doesn't consume that much time and > in case something is wrong With your log you normally will see it b4 > you upload. > > My 2 cents > Guy ON4AOI - OT7K > > > > > -----Original Message----- > From: dx4win-boun...@mailman.qth.net <dx4win-boun...@mailman.qth.net> > On Behalf Of Paul GRANGER > Sent: Thursday, January 9, 2020 12:20 PM > To: REFLECTOR dx4win <dx4win@mailman.qth.net> > Subject: [Dx4win] Updates > > Hi all > To the developper team, > Can we caress the hope of having next release to allow dX4Win to > interoperate with WSJT/JTDX for direct logging, automatic upload to > ClubLog, automatic/easy procedure to upload/download to/from LoTW. > LoTW/ aand Clublog operation has an application that works well with > other logging f=programs : it is called L32LogSync. Could something > equivalent be expected ? > > I hope to get an answer, as many users I am sure would love thse to be > imlemented. > > 73 > Paul F6EXV > ______________________________________________________________ > DX4WIN mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:DX4WIN@mailman.qth.net > > This list hosted by: http://www.qsl.net Please help support this email > list: http://www.qsl.net/donate.html > > . ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html