On 2021-04-21 9:35 AM, ON4AOI wrote:
>
Or you have or buy a microHAM device that creates 2 CAT ports and can
use one @ 38400 baud for dx4win and the other @ 115200 baud for
wsjtx >
The two CAT ports for microHAM "keyers" (microHAM USB Device Router)
must be set to the same rate. The maximum baud rate supported by
microHAM is 57,600 bps (TenTec Orion/Orion II/Omni VII).
If one needs waterfall/panadapter data from the transceiver (Icom),
use the transceiver USB connection for waterfall/panadapter and the
CI-V connection for the microHAM keyer (CAT connection). Details
are in the "Transceiver Settings" section of the Support area at
www.microHAM.com.
73,
... Joe, W4TV
On 2021-04-21 9:35 AM, ON4AOI wrote:
Hi All,
Before some start to argue about rigdrivers that doesn't work when you use
the USB connection with DX4WIN is "BULLSHIT"
It works perfect when you use the correct settings.
I have made so many drivers even that I don't own all the rigs.
First of all read this document and follow the procedure:
https://www.kkn.net/~n6tv/N6TV_Dayton_2020_Everything_USB.pdf
Kenwood, Yaesu and Icom (nearly all ways) installs 2 serial ports.
You need to use the correct one for CAT communication check your manual how
to.
In your Radio setup @ DX4WIN you will see that the max baudrate is
38400 for Yaesu,
19200 for Icom, limit by icom
57600 for Kenwood
Let me assure you that for the data we need 38400 baud is already overkill.
So if you use only USB connection set the baudrate for this port also on
what you see in DX4WIN
Higher want work......
The reason there USB serial ports are set to 115200 is when you use the
waterfall via there programs
Then you need that speed.
How about wsjt-x you may wonder how to fix that.
Or you have or buy a microHAM device that creates 2 CAT ports and can use
one @ 38400 baud for dx4win and the other @ 115200 baud for wsjtx
Or you also connect the serial port from the rig (if still available) to
your computer you can use this one for Dx4win and use the USB for WSJTX.
In the meantime I wrote also the FTDX10 rig file for test, if anyone needs
for test pse ask for it
Guy ON4AOI - OT7K
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
