Mike, he should do a straight import into a new log. Confirming QSOs does that for existing QSOs . Or do both if some QSOs were recovered already. —Paul
On Sat, Nov 5, 2022 at 8:33 PM Mike Cizek WØVTT <mgci...@gmail.com> wrote: > Hello Jim, > > For LoTW QSOs, log in to your LoTW account; Your QSOs tab; Download Report > (at the far right). Select a date that you think is earlier than your > first QSO, to make sure you get them all. I would also select "Include QSL > Details" and "Include QSO Station Details". Download Report. > In dx4win, in the QSO window: LoTW, Confirm LoTW using ADIF file, and > import the file you just downloaded. > > For WSJT, use File , Import/Export , ADIF , Import , and navigate to and > select the wsjtx_log-adi file. > > Save everything. Make a backup copy of your AA8OY.DXL file and save it > somewhere other than the internal HDD on your computer. (USB drive, cloud, > etc) > > To upload to LoTW, you must do that through TQSL. Download and install > TQSL from the LoTW web site (if you haven't already done so). Make sure > your callsign certificate is current and you have a station location set > up. Back in dx4win, in the QSO window: LoTW , Export to LoTW. Save the > adi file. Open TQSL, import and upload the file you just created in > dx4win. That's it. > > It may seem like a lot of steps, but once you get the hang of it, the > entire process takes less than a minute. LoTW, TQSL, and dx4win all > remember when you last uploaded and downloaded, for for future operations, > will only upload and down load new QSOs. > > > 73, > Mike Cizek W0VTT > > On Sat, Nov 5, 2022, 14:07 Jim Pyle <jpyle...@gmail.com> wrote: > > > FYI, I'm a new user trying to get DX4WIN up and running. Following a > > computer failure, I've been looking at ways to recover my log file QSOs. > > With the help of others, a number of recovery efforts were made which > were > > only partially successful. I'm ready to try to download my LOTW.adi file > > and convert it to a DXL file which is readable by DX4WIN. > > > > Can someone walk me through the conversion process? > > > > I also want to merge WSJT .adi files into my main log. I assume it > would > > be the same as the LOTW conversion. > > > > Last and also important to me is uploading QSOs to LOTW. It is not clear > > to me how to make a selection and then submit it to LOTW. I haven't > found > > the instructions for this. > > > > Input from the reflector would be greatly appreciated. > > > > Jim, AA8OY > > ______________________________________________________________ > > DX4WIN mailing list > > Home: http://mailman.qth.net/mailman/listinfo/dx4win > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:DX4WIN@mailman.qth.net > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: http://www.qsl.net/donate.html > > > ______________________________________________________________ > DX4WIN mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:DX4WIN@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > -- ~~~~~~~~~~~~~~~~~~~~~ DX4WIN logging software Paul van der Eijk, KK4HD BrookHill Data Systems LLC http://www.dx4win.com ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html