I had a similar problem and I turned keep alive off. No problem now! Denny WG6P
Take Care! Denny and Teri...... -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Steve Bertsch Sent: Thursday, May 23, 2002 10:14 PM To: [email protected] Subject: Re: [DXBase] DXBase 2003 and Internet Cluster I'm using DSL and 2 computers/router hub and everything works great. I was connected all day and no problems. 73, Steve WA6YFD On Fri, 24 May 2002 00:05:56 -0500, you wrote: >Hello All, > >I finally got DSL here in the shack and everything seems to be working fine except one thing. I have two computers in the shack, one for Ham Radio and the other is for email, ebay etc etc. Both computers are networked together which seems to work fine. The problem is when running DXBase on the Ham computer and connecting to an Internet Cluster that the connection seems to go dead after 20 - 40 mins. The spots are ok for a while then nothing. The Ham computer, the Main Computer and the DSL Modem are connected to a DSL Router Hub. I've checked for timeout settings etc and haven't found any other than the stay alive interval. It's hard to tell if the problem is in DXBase or the ethernet/router setup. >Any ideas? > >73's Larry > > >--- StripMime Report -- processed MIME parts --- >multipart/alternative > text/plain (text body -- kept) > text/html >The reason this message is shown is because the post was in HTML >or had an attachment. Attachments are not allowed. >Please post in Plain-Text only.--- >_______________________________________________ >DXBase Reflector - Please visit us on the web at www.dxbase.com >- - - - - - - - - - - - - - - - - - - - - - - >To UNSUBSCRIBE please visit: >http://mailman.qth.net/mailman/listinfo/dxbase ---------- Website: http://www.earthtravel.net/~sbertsch/ _______________________________________________ DXBase Reflector - Please visit us on the web at www.dxbase.com - - - - - - - - - - - - - - - - - - - - - - - To UNSUBSCRIBE please visit: http://mailman.qth.net/mailman/listinfo/dxbase
