I noticed some users are having problems with DXBase 2003 and the Kenwood TS-2000. I decided to try using a spot which incorporated both VFO's and this is the spot I used.
VE3WQ 28496.7 TI9JJP qsx 28501 Cocos Is 1411 19 Dec Once I clicked on it both VFO's responded as they are supposed to. In VFOa I had 28496.7 USB and VFOb I had 28501.0 USB which is exactly as it is supposed to do. Prior to the spot I had 50125.0 in VFOa and in VFOb I had 432.100 FM. I am using a Lavaport serial board and COM:3 with settings of 4800 baud No parity, 8 bits and 2 stop bits. I have also went into my Kenwood TS2000 and set the baud rate using Menu Number 56 to 4800 baud. My operating system is Windows 98SE and the PC is a Gigabyte GA-8HIXP and Intel Pentium IV at 2.4 gig. I hope this helps others clear this up but from where I am sitting I see no problem with DXBase regarding rig control with the TS2000X. Best wishes for the holidays and best 73 de K8SIX
